The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

?Entity continuity? refers to recurrent transcendent experiences related to certain places (?hauntings?). The experiences are often interpreted to be due to discarnate spirits or folklore entities. Although the entity continuity experience can be regarded as religious experience, they have yet to be fully explored in science of religion.The purpose of this paper was to describe entity continuity experiences and map out the scientific discussion in order to provide a psychology of religion that provides an understanding of the phenomena. For this purpose a literature study of theories of jungian psychology, parapsychology, and described experiences was undertaken.

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

When the introduction starts for the child and their parents it holds many emotions. There are many emotions involved in the first meeting between preschool and home for both the children and their parents. So my purpose with this study is to focus on two introduction models educators at my selected preschool works by. The purpose of my study is to focus on the two introduction models that are used by educators at my selected preschool. I ´m going to view this two models by examining how the educators prepare before the introduction starts and look at their point of view.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

The purpose of this essay has been to examine the public`s view of the Swedish eldercare during 2006. This study uses discourse analysis as a research method, the reference material has been articles from the newspaper Dagens Nyheter. The aim of the research has been to find central themes, conflicts and consensus in the discourse of eldercare. The analysis resulted in four main subjects which were based on four main questions; the questions of responsibility and execution, the question of contents, and the question of where the eldercare should take place. The analysis of conflicts and relations of consensus in the discourse of eldercare resulted in two different main views; the traditional and a more modern.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

The purpose of this literature study was to describe techniques for monitoring general anesthesia and standing chemical restraint in the horse. A number of various techniques and devices related to e.g. blood pressure measurement, blood gas analysis and pulse oximetry are defined, and finally their clinical relevance and reliability are discussed. The equine patient is generally far more exposed to anesthesia-related risks than other smaller species. Complications such as hypotension and hypercapnia are commonly seen during general anesthesia. Thus, close monitoring is essentially performed by the veterinary nurse, whom is responsible for monitoring the anesthetized patient.

Petro-electric IFVs (Infantry fighting vehicles) or hybrid-IFV?s are not a new phenomenon. During the 1900?s Germany as well as the U.S both tested vehicles constructed with hybrid technology. In spite of several identified advantages, no serving hybrid-IFV exists today.

Background: Coronary heart disease kills more than 7 million people worldwide each year. High levels of blood fat, cholesterol, contributes significantly to coronary heart disease. Lifestyle changes combined with lipid-lowering drugs, statins, is an effective treatment. But adherence to statins is low, not even a myocardial infarction always contributes to adherence. Adherence requires patient education and good communication between patient and physician.

Can you ensure that your smoke detector will sense fire and sound the alarm in the middle of the night?In 80 percent of the cases where emergency pulls out, smoke detectors are missing where the fire occurred. In the year of 2009, 118 people in Sweden died in fires ? most of them would have survived if there had been a functioning smoke detector.Earlier development of smoke detectors has mainly been focusing on components that sense smoke and alert in case of fire. But in most cases the problem has not been whether the smoke detector was working or not as fully assembled, but rather that it was missing.

My project is about attitudes towards disabled people, about our fear for those who are different, about acceptance, ideals and normality.My inspiration has been prosthesis, and mostly people that are born without limbs. Through my research I have come across a lot of questions. Such as, why is a prosthesis so important and for whom? Why is it so important to be normal? What is normal and for who? People that are born different se upon themselves as normal, until they realize that others don?t. Many of them want to learn how to deal with life without prosthesis. And therefore they reject these. Sometimes the prosthesis is aids that are highly necessary.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The study was conducted with an landscape approach with an subject related approach in the field of environmental psychology to investigate how road design affects drivers' choice of speed. The purpose was to portray road environments on thoroughfares in urban areas to motivate motorists to keep the speed limit and thus increase road safety for vulnerable road users. The task question was formulated, how can thoroughfares in suburban settings be portrayed to motivate motorists to reduce speed? The study was conducted throughout a literature review of motivational speed measures along with interviews with road design experts at the Swedish Transport Administration. Case studies were conducted on three thoroughfares in the Stockholm suburbs Vallentuna, Upplands Väsby and Danderyd.

The development of software was considered until the beginning of the 1990th as a cathedral like product development in closed companies. This way of development changed in the last decade. Open source software (OSS) development challenged this consideration significantly. OSS is produced in co-operation by skilled people, distributed and used by many moral agents. The result, the software itself, can be studied and modified.