There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

The aim of this paper is to investigate how well information and communication technology (ICT) is implemented in the new teacher training program in the subject of Swedish and how this is presented in the applications for examination licence to the National Swedish Agency for Higher Education. This is an interesting field of study, since ICT has been selected, by an investigation chosen by the government to be one of four overall perspectives that are supposed to permeate the teacher training program. There have been several difficulties involved in this project of which one has been the extent of the material.  27 applications and all curriculums in the subject of Swedish belonging to them have been examined. Another difficulty was that the applications and the curriculums are written by different persons under different conditions such as time and resources.

Service quality occurs in service encounters where both customers and employees come together in an interaction. It is therefore important that the staff give their best because the interaction usually takes place in real time, which is referred to as the moment of truth.The aim of this study was to find out how luxury hotels are working to ensure good service quality, and how the staff are motivated to deliver this service. We wanted to examine this from a management perspective, and an employee perspective. Information was gathered through various interviews, where the staff at the Hotel Kämp in Helsinki and at the Sheraton Hotel Stockholm participated.Survey results show that employee motivation, training and empowerment have a significant impact to provide service in high quality. The results also show that the surveyed hotel, to certain level work in the same way, but it reveals some differences even when both hotels are part of the same concern..

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

Scania står mitt i införandet av ett nytt CAD- och modellarkivsystem. Med införandet av dessa system öppnar sig nya möjligheter att hantera artikelinformation grafiskt som tidigare inte funnits. Med de nya systemen, Catia V5 och Enovia LCA, finns nu möjligheten att inleda processen mot att få 3D-modellen till informationsbärare.Examensarbetet syftar till att utvärdera och kartlägga möjligheterna för 3D-kravsättning med hjälp av FT&A modulen i Catia V5, för att få 3D-modellen som informationsbärare på Scania. FT&A modulen (Functional Tolerancing & Annotation) som utvärderats i arbetet kan bäst beskrivas som en mått- och toleranssättningsmodul för 3D-modellen. I utvärdering undersöktes förutom FT&A kompabiliteten mot Scanias ritningsstandarder, hur FT&A kravsatta modeller kan sparas ner i Enovia.För att få bättre förståelse för hur det dagliga arbetet med ritningar bedrivs på Scania genomfördes en undersökning med Scania medarbetare där nyckelpersoner från selekterade avdelningar intervjuades.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

This bachelor thesis aims to analyse the effects of changes in management control systems following acquisitions, and deduce whether or not these effects are in line with the acquiring firm's objectives of the acquisition. Through a case study of technician consultant firm Energo, acquired in 2010 by ÅF, the study assumes the perspective of the acquired firm. Data has been collected through in-depth interviews at Energo and ÅF and complemented by internal documents to enrich and validate specific facts and statements. Data was then arranged and analysed through Otley and Fierriera's (2009) framework Performance Management Systems to understand how management control systems were constituted before the acquisition, what changes were made following the acquisition, how this process was accomplished and how it was experienced, in order to come to conclusions about the effects of these changes. The study concludes that the changes in Energo's management control system following the integration with ÅF, had significant effects on the outcome of the acquisition, primarily as it led to a high rate of Energo's employees resigning.

This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

For many providers of ERP-system, Poland is one of the most valuable markets in Central andEastern Europe. The Polish market for ERP-systems is still a growing market, especially; wecan see the low utilization of ERP-systems among small and medium-sized enterprises. Thisis due to several factors, primarily the cost of implementing the system and the necessary infrastructure.Subsequently due to the lack of knowledge, where there is no sufficientknowledge of the benefits arising from the use of an ERP-system in their business, and thereis a fear within the companies that its business would start stagnating.This paper investigates the implementation process of a Polish consulting company whichworks towards small and medium-sized businesses. The key success factors will be studied inthe implementation of ERP-systems, and the instance factors of the interrelationship betweenthe consultant and client from a consultant perspective. The review of the literature has beenidentified and discussed in relevance to the empirical study.

When investigating mechanical problems it is often more convenient to deal with scalars rather than vectors. In this project methods stemming from the field of analytical mechanics, which lets one derive the equations of motion using scalar quantities instead of vectors, have been used. Two mechanical problems were investigated, a double pendulum with a spring and particles orbit in a sphere. The equations of motion of the two systems were derived with the assistance of computer algebra, using Maple and the external package Sophia. The systems were investigated with regard to periodicity and conserved quantities..

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.