The aim of this bachelor thesis is to through a theoretical analyze, investigate the conditions and the challenges for a consolidated democracy in Egypt from 1952 until after the revolution of 2011. The central question in this thesis is what opportunities and challenges are there for the democratic consolidation in Egypt, with respect to civic, political and economic conditions. How have the conditions developed between 1952 and 2011? How has the transition government/military government handled the central problems in the transitions phase after 2011? The theory used in this analysis is Linz and Stepans famous five arenas (the political society, the economic society, the civil society, the bureaucracy and the state of rule, whit focus on the three first). Through a qualitative case study we have analyzed the conditions in Egypt from 1952 to after the revolution 2011.The empirical material shows that the arenas in Egypt are both historically and current very weak, and they are not supporting democratic consolidation as they are challenged by several enormous problems.

There are widespread discussions about the use of retouched models in media, ranging from bloggers to legal decision-makers. Research shows that there are negative psychological effects on especially females being exposed to idealized, retouched model images. The purpose of this paper is to explore the effects of using retouched models in advertising from a marketing perspective, based on attitudes, perceived quality and purchase intentions.Based on theories about attractiveness, halo-effects and social comparison, an experimental study was done, investigating the different responses on above mentioned parameters to advertisements showing either retouched model images or non-retouched model images. Initially it was also tested if the retouched models were seen as more attractive than the non-retouched models. The results showed almost no differences between the reactions to the advertisements with retouched models compared to the advertisements with non-retouched models, when all respondent groups were analyzed together.

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

This essay in economic geography describes what intra-firm trade as a concept is and different ways to determine in which cases trade is to be labeled as intra-firm trade (IFT) or not. The method used by the author is most easily described as descriptive. This method was chosen in order to test if existing theories; classic and neoclassic economics, new trade theory and international business studies, are capable to explain the phenomena of IFT. The theories are tested trough primary and secondary literature but also trough reasoning by the author.The conclusion is that the most reasonable way to determine whether trade occurs intra-firm or not, is to decide upon a 5-% rule where it when one part owns 5-% of the voting strength in the other company is to be considered intra-firm trade. This is a conclusion based on several reasons; the strongest one being that a common view on IFT could boost comparative studies as the U.S already collects data based on the 5-% rule.Classic and neoclassic economics are incapable of explaining IFT as aprerequisite for these theories is that markets are perfect.

Användaracceptans är en viktig del i alla systemutvecklingsprojekt och är också en väldigt lättpåverkad variabel för en lyckad implementering. Därför är det viktigt att ha översikt på sådana faktorer som kan påverka användaracceptansen negativt, en sådan faktor är försening. Denna uppsats belyser sammanhanget mellan hur en försening påverkar användaracceptansen. Genom att låta en undersökningsgrupp genomgå en enkät utformad efter Technology Acceptance Model har jag samlat upp en generaliserad åsikt. Resultaten visar att försening som variabel inte påverkar användaracceptansen för fallstudien..

Social media has today reached a level of maturity similar to the Internet in the beginning of the millennium. More and more people get involved both on a private and professional level and companies are starting to realize the need to keep up with the new online behavior of its target groups. The Investor Relations(IR) function has for a very long time been carried out by writing reports and press releases, but maybe as times change so will the tools needed to communicate the IR-issues for the companies? The purpose of this paper was to examine the views on and involvement in social media for IR-purposes at the four main banks in Sweden: Nordea, SEB, Handelsbanken and Swedbank. The study was carried out in the form of a qualitative case study in which the banks were analyzed separately with the help of Davids and Venkateshs TAM2-model(2000) and also analyzed against one another.

That many creative workers have uncertain and uneven incomes is well-established, but how or why they make a living is not. This paper examines the elusive value exchanges between creatives, buyers, consumers, and other economic supporters, and offers a model of how creatives make a living. By mapping income statistics of Swedish creatives together with in-depth interviews some patterns emerge. This, combined with Bourdieu's theories of social, cultural and symbolic capital, and Knorr's objects of sociality, forms a basis for a structured model of value exchange. The paper shows how creative workers create economic and non-economic capital (capitalization), how they advertise this capital (signaling), and how they convert between different types of capital (conversion) in order to make a living.

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

The aim of this study is to examine whether the two factors SMB and HML in the Fama-French Three Factor Model proxy for default risk. The study is based on companies noted on the Stockholm Stock Exchange between 2003 and 2008. These companies are used to create the factors SMB and HML, as well as a default risk factor we call RMS. In a first set of regressions, we examine the explanatory power of the original Fama-French model on a set of portfolios consisting of Swedish companies of different size and book-to-market ratio. The default risk factor RMS is then added to the original Fama-French model.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Towards the end of the 1960s, the credit financed purchase was well established in Sweden. The Swedish households were able to purchase goods, which had been considered unnecessary, or even luxurious, in the past. On the other hand, effective means to handle the increasing amount of debt and potential debtors were introduced; credit rating was registered, trade with insecure claims increased and if debtors could not fulfil their obligations, the creditors often used harsh or undue methods. By introducing Inkassolagen (1974:182), the legislator hoped to regulate the debt recovery process and ensure the fair treatment of debtors. The legislator also introduced liability for damages caused by a creditor in the collection process.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Bankruptcy is a problem for the society in form of high costs for including suppliers, customers, employees, investors, banks, insurance companies etc. The purpose of this study is to confirm or dismiss a bankruptcy prediction model that has been developed in a previous Swedish study, in order to predict bankruptcy with help of specific key figures. The model has only been tested in a larger perspective where the population consisted of all small firms in Sweden, in this study the model´s reliability is tested by that it instead been applied to a minor perspective, where the population only includes Stockholm. With a quantitative approach of 12 different key figures from a total of 60 Swedish smaller registered companies in Stockholm between the years 2005-2007, has been studied. The companies are divided into two groups, companies with good financial health and companies that have ended up in bankruptcy.The results shows that the model is applicable in a smaller population, but some of the key figures do not generate essential or any type of information about bankruptcy, but the majority of the key figures in the model did.

A frequently asked question in real estate marketing is at what time of the year it is optimal to invest or sell. The aim of the project was to answer this question and to generate a prediction model over real estate located in the centre of Stockholm that takes seasons into account. With acquired sales statistics in Stockholm between 2010 and 2013 it was possible to perform a linear least square regression, also known as Ordinary Least Square (OLS), with describing qualities and season of sale as parameters. Statistical problems such as Multicollinearity and Heteroskedasticity have been taken into account when deriving the model. The result was a highly accurate prediction model indicating the profitability of investing in real estate during the summer and selling during the autumn..

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.