ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

Bakgrund: Ortodontisk behandling utförs vanligtvis på ungdomar och kan innebära en risk för den orala hälsan. Studier har visat att patienter med fast apparatur löper större risk att utveckla svullen gingiva och karies. Syfte: Syftet med studien är att undersöka tandvårdspersonalens rutiner kring munhygien hos patienter med fast apparatur på ortodontikliniker. Metod: Studien är en kvantitativ tvärsnittsstudie i form av en enkät med 11 frågor. Enkäten skickades till fyra ortodontikliniker i fyra olika län i södra Sverige.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Our society has become more and more digitalized and we have access to more information than ever before, which has had an effect on both our personal and professional lives. This change has naturally also changed the way in which organizations are structured and how they communicate ? both internally and externally. Intranets, e-mail and other technical channels are an important part of most organizations in-house communication today.The aim of this study is to examine how the internal communication in a medium-sized firm, CranabSlagkraft in the north of Sweden, works. The focus in the study is on the existing intranet, and if there are any differences in the opinions between the firms leaders and the employees that works in the production.

Today it becomes more and more important to work with continuous improvements to stay ahead of the competitors. Pfizer in Strängsäs started working with continuous improvements in 2010. By the end of 2012, the company?s goal is to reach 24 improvements per employee at the factory.Their project has two main purposes; to examine the need and possibilities for visualization regarding continuous improvements at the production department and to develop a concept for visualisation of the entire factory?s continuous improvements.To attain the information required to examine the needs at the production department, interviews with relevant employees at the department were conducted. Using interviews as a benchmarking instrument was also helpful in getting different points of views.

Syfte. Vårdrelaterade infektioner är ett stort problem inom hälso- och sjukvård. Dessa infektioner drabbar patienten och dess anhöriga samt bidrar till stora kostnader för samhället. Studier har visat att god följsamhet till de basala hygienrutinerna är ett effektivt sätt att minska förekomsten av vårdrelaterade infektioner. Syftet med denna studie var att studera två mottagningars följsamhet till basala hygienrutiner, varav den ena deltar i kvalitetsprojektet VRISS ? Vårdrelaterade Infektioner Ska Stoppas.

The harness racing industry has roots hundreds of years back in time and breeders through time have changed the horses to a mix of potential, harmony and speed. Breeding has changed the conditions and created a horse that perform better and better. A risk with high-performance horses is that injuries related to training and racing may occur more often. In training and racing situations, lameness is the most common injury. There are many factors affecting the occurrence of injuries and lameness of the trotter horses, such as how the horse is trained and raced, the surface condition of the racetrack, banking and angle of the curves of the racetrack and how fast injuries are discovered and treated.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over Routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

The study aims to describe and analyse the relationship between norm and practice regarding social services casework on honour-related problems. The relationship between norm and practice involves the difference between the way it is intended that social workers shall operate in these cases and how they perceive that this works in practice. We interviewed two focus groups of eight Swedish social workers, four in each group. We also held an individual interview with a social services business developer. Focus group interviews were based on two vignettes; one depicting an honour-related case and the second an "ordinary" case.

AbstractTitle: Gender equality ? of course! A qualitative study on gender equal recruitment at a universityAuthor: Ingrid ÖhlundSeveral studies show that the division of gender in Swedish universities is uneven. Since universities are important organizations where our future citizens get their education and become socialized, I found it interesting to investigate how a Swedish university handles the gender equality issue in the process of recruitment. The aim of this study was to contribute with a higher level of knowledge and understanding about the recruitment process out of a gender equality perspective. The aim was also to identify which stages of the recruitment process that was vulnerable out of a gender equality perspective.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.

The Swedish social insurance agency provides financial support for families and children, but also for people with work injury, illness and at old age. During 2012 they saw the amount of notifications of insurance increasing in Sweden, which is a development that cost our society a great deal of money. With the aim to pursue a sustainable development I have therefore devoted this project to wellness and stress management within preschool.The employees of preschool are often dealing with a lot of stress, due to the big groups of children that causes high noise and sound levels. The high noise and sound levels is a contributor to stress which additionally can damage the health and cause impaired hearing loss. About half of the people around their forties until the age of retirement have difficulties understanding speech in large groups.The purpose of this project has been to investigate the causes of negative stress for my target group, women between 30-60 years old who works in preschool.

Piglet survival is a problem of great significance in pig production, affecting both animal welfare and economic aspects negatively. In Sweden it is illegal to use farrowing crates for sows on regular basis. To encounter this problem there is a proposal of an animal welfare program to allow the use of crates for sows during, and a number of days after, farrowing. The proposal aims to reduce piglet mortality and improve pig welfare. This present review aims to analyse how crating affects the welfare of sows, gilts and piglets as well as piglet mortality.