The mission was to create a prototype of a menu system for the companySystem Andersson AB. The instructions were that it has to be as interesting andmodern now as in 20 years. We had to look at technology from the cutting edgeof development to make our prototype survive in the future. WindowsPresentation Foundation (WPF) was the technique we focused on. There areonly a few applications that take advantage of WPF today, but it is predictedthat WPF will be the next generation method for developing applications to theWindows platform.To make our menu visually appealing, easy to use and at the same timefunctional, we followed the clear path and guidelines that are available ininteraction design.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

How schools handles threat and violence among pupils could have an effect on the surrounding world, since schools reflect society at large. This study attempts to explore how this is handled within two schools, one secondary school and one upper secondary school. How do the schools work with violence and threats amongst pupils? Who is responsible for what? Is this work based on school guidelines? Why/why not? The theoretical starting-points have been Lundquists implementation-based control-model and an organizational point-of-view using theories about open and closed systems, primarily Meyer and Rowans neo-institutionalism. To gain validity, the study has been carried out by way of triangulation, i.e.

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

Audionomprogrammet.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Abstract The main subject of this essay is conflicts at work and the effect it has on the employee´s health.  I can through various reports read that bad health at workplaces is too high and that conflicts are a reason. What can be done to the work environment so it will be better from a psychosocial perspective? Sweden has a regulation that makes the employer responsible to work for an improvement in the work environment; can these regulations be used in purpose to reduce conflicts?My first question concerns the possibility to establish preventive procedures in the workplace systematic work regarding to improve the work environment. My second question is about the obligations of the employer to attempt to reduce conflicts at the workplace and the third question regards the documenting and monitoring of conflicts and the preventing work to reduce them. The purpose of this essay is to clarify how conflict preventive work can be included in the Systematic work environment management.

The following study is dedicated to investigate what kind of problems an organisation might stumble upon in the process of implementing a policy related to information security. Alongside investigating the eventual problems occurring in the implementation process of an organisation, the study also sets out to analyse how an organisation can motivate staff in order to follow the guidelines of a policy. The collection of empirical data was done using interviews. In order to seek answers to our research questions a theoretical background is presented that illustrate the need for information security after which motivational theories are applied to our collected data.To summarise the results of the study we find a gap of knowledge between the employees of the organisation. The organisational level of an employee together with the degree of participation in working with a policy seems connected to both the employee?s knowledge of a policy as well as how well the employee are motivated to learn about and follow the guidelines provided from a policy..

The main purpose of this master thesis is to identify guidelines for a sustainable production that can provide useful information concerning the establishment of a biodiesel production. These guidelines concern the surrounding production environment, such as infrastructures and industries.The thesis is based on theoretical grounds surrounding industrial symbiosis, biodiesel production and how sustainable development should be designed. A study of an already established producer in a similar business area has been used to provide a picture of similar projects. The thesis has with the supervisor's consent focused on the production conditions that are affected by location.The production conditions selected are heating, raw material market, residual and sustainable profile. These are then evaluated through an Excel-based sensitivity analysis.

This study aims to examine the regard paid to the use of Assistive Technology (AT) when assessing the knowledge of Year 9 pupils with dyslexia in the subject Swedish. A starting point was to examine the knowledge of a group of teachers in the areas of dyslexia and AT. The issues then developed as to which AT a dyslexic pupil is allowed to use in an assessment situation and how the use of these tools affects the assessment. There was an examination of the guidelines that the teacher group can use as support when assessing the knowledge of dyslexic pupils on the basis of AT. The method used was qualitative semi-structured interviews.

An increasing amount of companies and organizations are starting to implement the use of cloud computing in their business. This trend results in that software, which was previously sold and distributed to the customers whom then had to install the software on their own computers, now is being replaced with Software as a Service (SaaS). SaaS makes software available through the customers? browsers, which results in that the service providers only have to administer a single application. The process to migrate a distributed application to a service delivered as a SaaS lacks sufficient investigation; this paper will provide some guidelines for conducting such a pro- cess.

Vi, Linda Runvall och Satu Parantainen, har gjort vårt examensarbete för företaget Leine & Linde i Strängnäs. De tillverkar pulsgivare som används inom industrin. Examensarbetet bestod av att göra om en befintlig manual och skriva guidelines (riktlinjer) till Leine & Lindes personal.Under vårt examensarbete har vi använt oss av våra kunskaper inom informationsdesign. Rune Pettersson, professor i informationsdesign vid Mälardalens högskola, beskriver ämnet informationsdesign såhär:?In order to satisfy the information needs of the intended receivers information design comprises analysis, planning, presentation and understanding of a message- its content, language and form.

???This study has been made with the purpose of gaining an understanding of how a Swedish company may think and act concerning their internal control. An American body, COSO, have for some time published documents containing guidelines for how companies should go about this process, however, when conducting this study we were not aware of the extent to which companies in Europe and mainly Sweden used them. In order to learn about this, and also to gain an understanding of when these guidelines are appropriate, we conducted a case study with a large-sized, multinational Swedish company. We also conducted an interview with an expert in internal control monitoring, Anna-Clara af Ekenstam of Pricewaterhouse Coopers, in order to get the perspective of the evaluators in this process and to gain some insight as to whether our case is typical in Sweden or not. We found that our company disregards certain aspects of internal control condoned by COSO, while performing better on other dimensions.

This master?s thesis investigates publishing of Swedish literary classics on the web. The purpose is to find out who is publishing and why, and what practice of publishing is used. The purpose is also to find out what importance the publishers attach to textual quality and proofreading. For these questions the ?Guidelines for editors of scholarly editions? by MLA is used.