Background: Urinary tract infections caused by indwelling urinary catheters causes unneccesay suffering among those it affects. These infections are also financially straining on the health care services. It is therefore of importance to gain knowledge about which evidence based preventive interventions that have the possibility to reduce the risk for bacteriuria and urinary tract infections among patients with indwelling urinary catheters. Aim: This study aimed to compile available knowledge concerning i) if silver alloy catheters does reduce bacteriuria in this patient group, ii) if aseptic catheterization does reduce bacteriuria in this patientgroup, iii) which routines for changing the urinary drainage bag reduces the risk of bacteriuria, iv) which routine genital hygenic care reduces the risk of bacteriuria? Method: Litterature was searched for in the data bases Cinahl, Medline and The Cochrane Library using the data bases? thesaurius combined with OR/AND.

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

The purpose of this study is to examine what motivates people to help others at risk to themselves. The focus is on international aid workers, which in their work put themselves in situations of risk. Earlier research shows that international aid work involves risks such as infectious diseases, violence, death threats, assaults, constant insecurity and risk to be traumatized etc. There is not much research done on what motivates to help others in spite of risks, hence we find this an interesting area. We have interviewed six respondents about the content and character of their motivation and factors that are important for the maintenance and development of this motivation.

Hard-to-heal ulcers are resource intensive due to the fact that they are difficult to treat and especially vulnerable to bacterial invasion. The bacterial culture contaminating these wounds often consist of several different bacterial organisms that originate from endogenous sources. Necrotic material in ischemic ulcers provide nutrition which support bacterial reproduction, increasing the risk of infection. Determining causative pathogen in infected ulcers proves to be difficult when culturing swab samples, however Staphylococcus aureus and hemolytic streptococci generally act as primary pathogens.    The aim of the study was to investigate if the detection rate increased for S. aureus and hemolytic streptococci when culturing swab samples from ulcers on Columbia CNA; a media selective for gram-positive bacteria.

Företaget som studien utförts på upplever ett problem vid hanteringen av underhållsarbete i fabriken. Processerna för felrapportering och beställning av reservdelar är tidskrävande och involverar arbete från flera olika parter. Merparten av allt underhållsarbete som utförs är av oplanerat slag och ett fungerande uppföljningsarbete för att komma till rätta med de pro-duktionsstörningar som äger rum i processen saknas.Syftet med examensarbetet har varit att skapa underlag för att förbättra företagets effektivitet genom att optimera underhållsarbetet med hjälp av förslag till ett underhållssystem och olika tillvägagångssätt för att effektivisera underhållsarbetet.Under arbetets gång har en underhållsloggbok utformats i Excel. Loggboken används till att logga alla underhållsarbeten som inträffar i produktionen. Dessa arbeten ligger till grund för merparten av de beräkningar som utförts under projektet.Beräkningarna syftade till att kartlägga var i processen flest fel inträffar och av vilken karaktär dessa fel är.

Identification of fungi is based on macroscopic observations of morphology and microscopic characteristics. These conventional methods are time-consuming and requires expert knowledge. For the past years Matrix-assisted laser desorption ionization-time of flight mass spectrometry has been used for routine bacterial identification in clinical laboratories but not yet in the same extension for fungi. In this study three preanalytic preparation methods for fungi were evaluated in order to shorten the processing time in routine laboratory performance.Clinically relevant strains (n=18) of molds and dermatophytes were cultivated on agar plates and prepared according to the different preparation methods for protein extraction. Each strain was analyzed in quadruplicate by the MALDI Biotyper and the database Filamentous Fungi Library 1.0.The results showed that the genus and species identification rates of the least time-consuming direct extraction method were 33% and 11% respectively.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

The heating of companies premises is today functional with electrical heating and heating offossil fuel. The energy cost for these kinds of heating in buildings has heavily increased duringthe last years and the influence on the environment has become more visual. This leads to thatenterprises today become more anxious to render energy more effective and find alternativesolutions to their ancient heating systems. This is something that Skandinaviska kraftprodukterAB in Halmstad has become aware of.The purpose with this examination is to find the most cost-efficient and environmental measuresfor the office and workshop premises of SKP AB. Where one of the bigger things is to find agood alternative for their current oil furnace, which was heating the workshop.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

The thesis has been carried out at Nedis AB in Jönköping. The aim was to develop proposals on approaches that could help the company to continually improve their warehouse operations by eliminating unnecessary operations, making the warehouse more structured and how they better could use the staff's suggestions for improve-ment. The collection of data consists of observations, interviews with a total of nine people from the staff of Nedis AB and a benchmarking conducted at Husqvarna AB. A number of shortcomings and weaknesses in procedures at the warehouse were iden-tified. Packing stations were not standardized and they were seen as poorly structured and messy.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.