The essay is written at the request of Nyköping municipality park management by PatRadestedt who wanted a design proposal for one of the five courtyards at the Tessin Schoolin Nyköping. The Tessin School is located 2 miles from the center of Nyköping and the schoolhouses approximately 900 students. To make a design proposal for the courtyard that lies atthe canteen I decided from the outset that I wanted to take some of the Tessin SchoolStudents' opinions and wishes regarding their own outdoor spaces. I had a workshop witheight students from the arts program with the image orientation in which they had to drawand tell them what they wanted to do in the courtyard. The outcome of the workshop, Iused to move forward in my future work with a concept that fit into the environment, wethen apply it in my final design proposal.

No infrastructures today are growing faster then communication network. The requirement of being able to communicate in a fast and qualified environment to a low cost increases in line with the development and competition. Itera Networks is no exception when it comes to rapidly developing new and better network solutions for themselves and for their customers. With these requirements in mind their needs for an analysis of the existing communication solution becomes very obvious. This project contains such an analysis in which various studies of the existing network environment have been made.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

In this report listed buildings, according to the Swedish Heritage Conservation Act, have been studied with a focus on cases where economical compensation has been given to the owner of the building and cases where the listing of the building has been appealed by the owner. In order for a building to become listed it needs to be particularly valuable from a cultural and historical standpoint. The listed buildings are protected through a list of regulations that determines which parts of the building can or cannot be changed, what methods and materials should be used for changes and repairs, and how the building should be maintained. These regulations should as far as possible be formulated in agreement with the owner, but a building can become listed against the owners will. To decrease the damage this causes the owner he can in some cases have the right to economical compensation. There is also a possibility for the owner to appeal the listing of the building.

To work in an unpredictable work environment requires communication that functions well. In every organization it?s important that employees receive information that is relevant yet not confusing. Due to that, our ambition with this study is to understand how rescue effort organizations communicate in meetings; and whether their communication is clear or not. Our subject for this case study is the Emergency Services in the region of Karlstad.

In Sweden and in the rest of the world we face the problem how to create a sustainable development. At the same time the Swedish million program, a housing program made in the 1960:s and 1970:s, is facing a renewal due to lack of maintenance during many years. An attempt to join these two interests has been made in the residential area of Gårdsten north of Gothenburg. This paper is a case study to review the project and its approach to the sustainability concept. The purpose is to spread knowledge about the problems that can arise. By studying documentation about the reconstruction I have analyzed the approach that has been used. The housing company?s starting point was user participation and an intention to make the changes visible.

The aim of our Master´s thesis is to investigate the development of the different libraries in the former communities of Flisby and Lofta during the former part of the twentieth century. We ask the following questions:How did the libraries in Flisby and Lofta develop between the years of 1905 and 1952?How can we understand the libraries? dependency of funding of different kinds? We have used case study as a method, and we have adopted a source criticism approach. We have mainly used our local archives and among other things we have investigated various sorts of protocols, annual reports, auditor?s reports and the accounts that were sent to the Board of Education.

To be able to maintain an adequate ITservice for various users and needs,more municipalities are looking at thepossibility for mergers of local ITdepartments. One solution for mergingmultiple services/functions and creatingsynergy opportunities is called SharedService Center (SSC). The concept of SSCis that the administrative serviceitself becomes a core activity withinthe organization. The aim of this thesisis to provide municipalities who areconsidering a merging of their local ITdepartments with recommendations on howto design the Shared IT Service Center.Recommendations are outlined based on ananalysis of IT-management literature,reports and by conducting a study onthree ongoing collaborations.The conclusions drawn from the studysuggest guidelines for the design of aShared IT Service Center formunicipalities. These are as following:Create a vision associated with aspecific and structured target state.Identify needs for different targetgroups in municipalities and set acommon standard.Create a clear and practical model/SLAappearance of the cooperation andagreement.Ensure the individual municipalitiescommissioning skills in order to notlose it in the context of a common IToperation.Find an organization that is democraticfor member municipalities andfacilitates long-term partnership.Specify the operation and maintenance sothat it can be regulated and controlledEstablish a common help desk.Establish a common standard andconsolidated infrastructure before theintroduction of a common technology platform..

When constructing a new house many questions appear, from architecture to decisions regarding installations. Sweden is situated in a cold part of the planet and questions regarding which heating system to install face everyone who decides to build a new house. This thesis describes a construction solution of a villa in Kiruna. The extended essay analyzes which heating system is most suitable for the construction. The options are geothermal, district and pellet heating systems.

This report is a result of a bachelor thesis at the school of Architecture and the Built environment (corresponding to 15 HP) and is written during spring 2012 at the Royal Institute of Technology (KTH) in Stockholm. The Bachelor's essay is based on the design and dimensioning of a house which is located at a predetermined site in Malmo, Sweden.The idea is to construct a house that is appropriate to use for an average Swedish family of four family members. The house is designed in a modern way with respect to ease of access and disabled facilities. The installation that have been considered are heating, ventilation, sanitation and electricity. Construction calculations and material selection are also discussed.Furthermore, a study about photovoltaic cells has been done.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

Aim: The aim of this study was to analyse how corporations can learn from past issues and corporate crises and to see how they use this knowledge in the management of subsequent issues and corporate crises. Furthermore, the influence of media on the possible intensification of the issue or corporate crisis, but also its impact on the company?s usage of knowledge management, was to be analysed.Method: The study was carried out through a case study method, in the hope of being able to analyze how a company makes use of knowledge management in the communication that occurs during issues and corporate crises. A semi-structured interview was conducted, with the head of public relations of the chosen company as a respondent. The purpose of the interview was to analyze the underlying factors behind a specific way of communicating.

ABSTRACT This study consists of a comparison between a public and a private organization that works with people with mental unhealth. The first organization is an authority that conducts investigations to determine if their clients are qualified to receive some sort of help in their daily lives as a part of the Swedish welfare system. The private organization works with offering different kinds of daily activities for people with mental unhealth as a work-training program or to help them create a daily routine in their lives. Our purpose with this paper is to compare the work of the two different organizations based on their organizational framework to see what similarities and differences there are in their work and their chosen approach in meetings with their clients. Our chosen method is that of semi-structured qualitative interviews with three different employees in each organization.