The county of Dalarna is at present carrying through a process of digitalization where traditional x-ray film is being replaced with digital detectors. Earlier used methods for dose optimization turned out not being sufficient. This report presents a method to harmonize dose levels between x- ray sites equipped with Fujifilm imaging plate systems. An exposure index, S, related to the dose level of the examination is computed to every x-ray image. S turned out to be inversely proportional to the detector dose used at the examination.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

This study has been assigned by Bengt Hellman who works at the logistic department at IKEA Torsvik just outside of Jönköping. The task has been to develop a new picking strategy for the Oversize area in the CDC-Warehouse. The reason why IKEA wants a new strategy is because they want to minimize the route length for the forklifts when collecting the orders.By evaluating the current strategies on other areas in the CDC-storehouse, study literature within this subject and look at restrictions for the storing of goods, we have analyzed how the Oversize area works today. We compared the gathered information, to how it should be done according to the literature to be able to work out a new functional strategy.Today, IKEA does not have a working strategy for the oversize area because of lack of time and because all the power has been put on other areas were sales rates are currently higher. This have led to lack of organisation at the Oversize area and items are just put were there is space without first analysing were it should be placed.The strategy that we have worked out and introduced to IKEA builds on easiness of understanding the layout, the employees shall know why an item is placed where it is.

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.

The county hospital of Dalarna has for the last couple of years carried through a process of digitalization. The result is that within the county it exists image plate systems from two different manufacturers. In an attempt to create a tool for dose optimization and dose surveillance the county of Dalarna would like to investigate if the exposure index from Agfa and Fuji is suitable as a dose indicator. An investigation of the exposure index, S, from Fuji has already been done. This thesis has been continuing the investigation by evaluating the stability of the exposure index, lgM, from Agfa.

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

Abstract. Title: Supply Chain Optimization ? for Sourced Production. Authors: Patricia Möller and Andreas Paulsson. Tutors: Jan Eskil Hollen ? Business Developer, Lilleborg as, Orkla, Everth Larsson ? Department of Industrial Management and Logistics, Division of Engineering Logistics, Lund University, Carl-Henric Nilsson ? Department of Economics and Business Administration, School of economics and management, Lund University.

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

The wastewater treatment plant at GE Healthcare's facility in Uppsala deployed a three step vacuum evaporator in 2007. The purpose of this was to pre-treat wastewater containing amines. The purpose of this thesis was to optimize thisprocess by reducing the amount of concentrate without releasing more nitrogen tothe environment and to examine if density could be used as a measurement of whenthe process should be ended.To create a foundation for optimization six test cycles were conducted with samples taken from all three steps. Both concentrate and condensate were tested as well as the incoming solution. Furthermore, the thesis has been expanded with a benchmarking part examining two different evaporators.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

Servera R&S AB is Sweden?s largest wholesale company within the restaurant and food service industry. Servera R&S AB is the daughter company to Axel Johnson AB, which in turn is a part of the Axel Johnson Group with Antonia Ax:son Johnson as the owner. Servera is a nation wide company with a business concept of offering a complete selection of merchandise and services to the professional food service market. The company is split into for different regions: the north region, the middle region, the southwest region, and the southeast region and has its headquarter in Stockholm.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

This thesis presents a system which has been implemented to satisfy a need in theresearch on how speech planning interacts with syntactic and prosodic structure inspontaneous speech. The long-term purpose of the research is to provide models forautomatic parsing of spontaneous speech and for psycholinguistical modelling of speechproduction. Identification of inhalation pauses is an important step in the developmentof automatic methods for spontaneous speech parsing.Identification of inhalation pauses is considered to be a keyword-spotting speechrecognition problem. Hybrid HMM(Hidden Markov Models)/ANN(Artificial NeuralNetworks) approach is applied to this problem. Method gets 90,8% in Recall, 66,4% inPrecision and 76,7% in F-score.