In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

During the summer of 2007 I was employed by Högestad Christinehofs Förvaltning AB. My main task was to make an inventory of giant trees at the estate. Högestad and Christinehof,which with their total possession of 13 000 ha of land is the biggest estate in Scania. A giant tree is a tree with a diameter in breast height more then 1 meter. Trees of these dimensions are registered by Swedish authorities. Landowners with a giant tree on their property can receive a subsidy for cutting trees that are in competition with the giant tree.(Levenskog, 2007) Giant trees are important for biodiversity in the landscape and there are important habitats for different insects, birds, bats, lichens and funguses.

Död ved är mycket viktigt för skogens ekosystem. Minskningen av död ved i dagens produktionsskogar har skapat ett stort problem för flertalet vedlevande arter. Denna studie gjordes för att ge en ökad kunskap om vilka faktorer som spelar in när det gäller förekomst och utbredning av de två vedlevande arterna Anastrophyllum hellerianum och Dicranum flagellare. Täckningsgraden av de två arterna undersöktes på lågor, tillsammans med faktorerna: art, diameter, nedbrytningsgrad, antal lågor i närheten, solexponering, markkontakt och fuktighet i mark. Tre typer av skogar inventerades.

The aim of the study was to compare how the population of pine (Pinus sylvestris) and spruce (Picea abies) have changed between 1927 and 2013 in the oak landscape south of Linköping. A field study was carried out in 22 two kilometre lines which also had been studied in 1927. In these lines, which where ten meters broad and had a direction from west to east, the pines and spruces were counted, measured and classified by steam diameter. The obtained result was that the basal steam area (m²/ha) had increased for pine (44%) and spruce (57%) between 1927 and 2013. The amount of trees had increased in all diameter classes except thinner pine and spruce with a diameter of 5-10cm.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.

Examensarbete gjordes för Primus AB som konstruerar och tillverkar friluftskök. Examensarbetet syftade till att utreda vilka utvecklingsmöjligheter som fanns för dagens brännare till friluftskök.Efter analys av befintliga brännare identifierades utvecklingsmöjligheter för att justera brännarens lågmönster och därmed diameter. Med ett korrekt lågmönster i förhållande till storleken på kokkärlet som används kan tillagningstiden och energiförbrukningen effektiviseras.En grundlig genomsökning av patentdokumentation genomfördes för att skapa en överblick av befintliga lösningar på ämnet. Patentdokumentationen fungerade även som inspiration för konceptgenereringsfasen.Sex koncept togs fram som på olika sätt styr lågans diameter. Funktionsprototyper på koncepten konstruerades och utvärderades.Den slutliga lösningen som togs fram bygger på en brännare med två fasta lågmönster.

The forests of Sweden are constantly changing. Map studies indicate that the amount of deciduous trees in Sweden has decreased in recent years in favor of the coniferous trees. The National Forest Inventory has since the early 1920s monitored the Swedish forests and in recent years has made the old data digitally available. In the present project, we have investigated how the numbers of stems in different diameter classes have changed for birch and other deciduous trees. The inventory was conducted in the same manner as in the first forest inventory.

En ny medicinteknisk produkt, ett resorberbart, kirurgiskt buntband (LigaTie®) för ligering av kärl har utvecklats vid Sveriges lantbruksuniversitet. En pilotstudie genomfördes för att undersöka begränsningsområdet med avseende på minsta möjliga kärldiameter som kan ligeras med produkten. Djurmaterialet i detta terminala in vivo-försök utgjordes av en sövd hund. Icke resorberbart band, som formsprutats i samma form som LigaTie®, fördes runt kärl tillhörande krös, mjälte och njurar. Bandets ände fördes genom den låsmekanism som finns i bandets andra ände.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

The purpose of this study was to estimate the removal of biomass in connection with thinning operations in young stands that are dominated by small diameter trees. The economy of such operations depends on the products generated as well as the performance of the harvesting systems. Conversion tables designed to predict the outcome based on harvesting method was another goal of this study. Removal of biomass affects the nutrient composition of the site. Therefore it is a purpose that this study will provide researchers with some variables that can be utilized when studying this aspect. Trees were harvested and divided into bunches based on diameter.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

Skyddandet av gamla skogar med höga naturvärden är en viktig del i bevarandet av den biologiska mångfalden. För att kunna lokalisera och kvalitetsbedöma skogar med höga naturvärden används signalarter. En av dessa signalarter är Lecanactis abietina, gammelgranslav. Syftet med denna studie är att identifiera vilka faktorer som påverkar förekomst av signalarten L. abietina och täckningsgraden av apothecier.