The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a Rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the Rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a Rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the Rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

Every organization goes through the same lifecycle. Through every step in the transformation to a better organization the communication structure changes. In this report there are examples of the communicational disadvantages that is connected to the communicational structure.By choosing to not have a formal communicational design, the manager takes a risk in spreading the information, the interaction, the control and the balance in creativity and constraint.This case organizations problem is that some parts of the organization has made more progress in the communicational structure than other parts. In this case the Collectivity structure has met the Formalized structure.Tha structural differences has came to affect the way of sharing information and it has become a situation where the information about the products is not stored in a safe way from a quality point of view. There is a gap between the two different ways of communicate.In this report I have created a model to identify problems in the communication structure.

The purpose of this thesis is to ascertain the main determinable factors of Swedish SMEs capital structure decisions and to investigate whether existing capital structure theories are applicable on Swedish SME financing. We have used panel data to run regressions of various capital structure determinants on three measures of capital structure; short- term debt, long-term debt and total debt. We found that growth opportunities, profitability and age are the most important capitalstructures determinants for our sample. Firm size shows a small explanatory result but the effective tax rate and the asset tangibility do not seem to explain the capital structure at all. Thematurity matching principle is considered significant..

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

During the past year it has been made possible to buy back a company?s outstanding stock. This is done in order to change the capital structure towards a situation with less equity. A change in capital structure means a change in the cost of capital for a company and by that a change in the value for the stockholder. This Master Thesis studies the relation between capital structure and business risk.

The objective of this thesis is to examine the capital structure of Swedish small and medium sized enterprises (SMEs). Accounting data from Swedish game developers, combined with the result from a survey, is used to examine their financial conditions and capital structure decisions. We find that non-debt tax shield, firm size, growth opportunities and age are, to various extents, the determinants of capital structure in the game industry, while effective tax rate and asset structure have marginal effects. Our study also implicates that most of the existing capital structure theories can explain SMEs leverage decisions to some extent; however, some adaptation is needed to fit these theories into the SME context. Additionally, we find the existence of a financial gap in the game industry which might need efforts from both demand side and supply side to eliminate..

The relational database model was defined in the 1970?s and is the dominating database type today.  The main difference between data from a relational database and a hierarchical data structure is that the relational database stores records in tables. The records have no particular order, but can include links in terms of relationships with other records. A hierarchical structure organizes data in the form of a tree structure  and  can for an example be found in organizational structures in which different levels involves different responsibilities. If the data stored in a relational database is to be presented in a hierarchically, a conversion of the data structure is required. The intention of this paper is to describe how such a conversion can be performed.  To investigate the conversion methods, case studies has been conducted on the basis of a specific organization?s hierarchical structure.

The aim of this thesis is to investigate which the main determinants of capital structure in Swedish listed firms are and to identify which incentives lies behind managers choice of capital structure determinants. Further, the study investigates whether the Post Keynesian theory and theories which incorporate behavioral aspects can be used to explain the capital structure decisions or if the traditional Neoclassical theory give an better explanation. We have used a qualitative method to analyze the determinants of capital structure and the managers incentives behind capital structure decision. We conducted a survey which was sent to 83 Chief Financial Managers and financial executives in Swedish firms listed on Mid Cap or Large Cap. The questionnaire was on-line which enabled for the respondents to quickly and convenient respond.

The purpose of this thesis is to test whether firms have target capital structure, and if so with what speed they adjust toward this target. Findings that support this purpose are also in line with the trade off theory. One of the key elements of this thesis is the method used, which successfully enables fulfilling the purpose. The panel data method captures the data characteristics of the cross sectional and time series dimension. By using this approach the dynamic effects of capital structure can be studied, thus if there actually is an adjustment towards a target the speed can be estimated.

During the autumn of 2008 I obtained office experience by working at the local government of Örnsköldsvik. I started working on the district green plan of the green structure and that led to the work of this exam paper. The purpose of this exam paper has been to define some standpoints for the green structure of the local government district of Örnsköldsvik. I have used both a larger and a smaller scale to obtain a wide a perspective as possible of the green structure. The larger scale gives an overall view of the whole municipality while the smaller scale is found in the study of the two local areas Centrum and Domsjö. For the local government planning to be able to obtain an agreeable level of verdure to the residents it is necessary that the green structure is brought up on the agenda.