This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Outdoor housing of horses? best fulfils the horses? need for physical activity and it is an alternative to the more cost and energy demanding indoor housing in stables. Furthermore, if outdoor housed horses have access to shelter they can generally cope well with adverse weather conditions such as high or low ambient temperature, heavy rain or strong winds. In this study, the daytime shelter-seeking behaviour of three groups of horses housed outdoors was studied during the summer. The aim was to evaluate whether shelter use is related to weather variables (e.g., ambient temperature and wind speed) and insect harassment. The shelter-seeking behaviour was studied for three different groups of horses: Group 1) eight individually housed horses in paddocks that had access to three different shelter types (C: closed on three sides with Roof, R: open on three sides with Roof, W: closed on three sides without Roof), Group 2) 25 group housed mares with foals on pasture with access to shelters C, and Group 3) ten mares without foals on pasture without access to shelter. Each group was studied for eight days.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for Roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as Roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and Roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

This thesis aims at determining the heat losses in a property vent stack and its Roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a Roof on top. Both of the buildings are compared to every alternative in the calculations.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

The task in this master thesis was to design and construct a prototype of a satellite antenna driver unit. The unit is to be robust and work in cold weather down to -40°C, so that it can be mounted on the Roof of a minibus. A microcontroller controls the H-bridges simultaneous, each connected to an electrical motor. Hardware and software protections were implemented to ensure that the antenna can not turn outside its allowed area and risk breaking. The unit can output voltages at many different levels and communicate at a multitude of signal standards..

There is two dairy farms in Sweden with ability to be opened on both long sides, one outside Hjo and the other one, Brandstadholm, north of Sjöbo. When there is no measures and results or not enough literature about natural ventilation and especially on this kind of air inlet, makes my tests very interesting not only on Alnarp, but among other companies. I would like to find out if there is any air movements direct on the cows, how high/low temperature, air humidity, light intensity and noise standard inside the barn. Does Brandstadholm fulfil the rules and regulations when it comes to climate inside the barn? Could this system become the new dairy barn instead of the conventional barns in Sweden? I am going to focus on the animals environment, after all they are the one who is going to spend the most of the time in the barn. I used five electrical loggers distributed inside the barn to measure the temperature and one of the loggers measured the air humidity, every 15th minute. One logger were placed on the outside which measured both temperature and air humidity.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s Roof is a gableRoof, which has an angle of 24 degrees.

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.