Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

Det har blivit allt vanligare att ta med sin hund på resa, vilket bland annat kan bero på att det numera är både billigare och lättare att resa med hundar, sedan Jordbruksverket 1 januari 2012 införde nya regler rörande införsel av hund. I denna litteraturstudie sammanställs tillgänglig litteratur för att undersöka hur sällskapshundar påverkas av stress och om transport är stressande, samt vilka faktorer som är av betydelse under transporten. Stress kan ge både fysisk och psykisk påverkan och på sikt påverka immunförsvaret och öka mottagligheten för infektioner. I flera studier på olika djurslag har en ökning av bland annat hormonerna kortisol, adrenalin och noradrenalin uppmätts vid stress. Olika typer av beteendeförändringar kan också uppkomma i samband med stressfyllda situationer, men vilka beteenden som uppkommer varierar mellan individer och olika stressorer.

A high quality is highly requested in today?s thinnings, since these are the base for continued value development of the forests. Thinning quality often means a minimization of damages on soil, stems and roots during the cutting. One way to reach a high quality is to set up goals that will be followed up after the cutting is made. Self-checking gives information of the machine drivers work and guarantees the customers a good quality of work.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

Detta examensarbete, på uppdrag av Atlas Copco Rock Drills AB, syftar till att kartlägga de problem gällande vibrationer som finns och uppstår vid användandet av produkten Scaletec MC och komma med förslag till lösningar på ett nytt system som bättre hanterar vibrationer än det befintliga. Lösningarna är avgränsade till hytten och hyttens koppling mot ramen. Kartläggningen av Scaletec MC visade att den största problemskaparen är den långa bommen med den tunga hydraulhammaren framtill. Den skapar rörelse i hytten både vid skrotning och vid transport. Vid transport är även den odämpade stolen, de ojämna vägarna och det faktum att axlarna är stela ett stort problem som genererar helkroppsvibrationer hos operatören.

This study focuses on the transfer between a product-oriented to a service-oriented perspective regarding marketing activities in companies due to the development of information technology. It illustrates how this very transfer has been, and can be, contemplated through the eyes of organizations working with marketing in a digital world on a daily basis. Technology has turned several industries - their price-setting, communication channels and supplying possiblities - upside-down. This turnpoint brings out a new way of observing and working with marketing. Therefore, we find it interesting to gain a better understanding of how actors within industries where the turnpoint is a fact observes marketing, and how this service perspective can be seen in their various organizations and daily.

The purpose of this study was to, through the life stories of four women and their experiences, thoughts and feelings according to a life in drug dependency reach an increased knowledge about how a dependency can arise, continue and be brought to an end. The question at issue were: How do a small amount of women describe and comprehend their experiences, thoughts and feelings according to their drug addiction seen through a process perspective. In order to answer that question three themes were investigated: the road into dependency, living as an addict and the road to recovery from dependency and the time that follows. The study followed a qualitative method and the theoretical approach was hermeneutic. The results were analysed through a process analyse perspective, from the view of the chosen theoretical perspectives, social constructivism, experience perspective and a psychodynamic perspective.

This degree project is an investigation of solar cells and their ability to deliver electric power as well as reducing the need for cooling. The main object of interest is a BASE-X shelter. The shelter is purchased by the Swedish Defence Materiel Administration, FMV to be used for command and camp in the new force called Nordic Battlegroup, NBG. The demand on the equipment is firstly that it should have a small weight to be easy to transport and handle and secondly to be easy to bring up fast. Therefore the choice of solar cell technology fell on thin film cells.

The main objective of this study was to evaluate animal welfare situation in Ethiopia during slaughter and to investigate chain activities between animal markets and Kera abattoir in Addis Abeba. In total, 442 animals were observed within 52 groups of cattle; both ox and calves with different breeds. The study was divided into four different sets of data collection; behavioural observations, recording of slaughter process, observation during transport and interview. During the behavioural observations, an ethogram was used with 46 behaviours observed, categorised into 5 different groups. The data was calculated using Excel and SAS. The results indicated that a significant correlation (p-value.

The purpose of this masters? thesis is to investigate how public librarians perceive privacy in connection with new technology in libraries. The main research questions are: - How do librarians experience the phenomenon privacy in the library?- How do librarians experience the relation between privacy and technology in the library?- What does this say about the relationship between privacy, technological development and library work?The study was performed with a phenomenographic methodological approach. The material consists of qualitative interviews with eight librarians who work at public libraries where the technology RFID (Radio Frequency Identification) has been implemented.

The purpose with this project is to evaluate which of today?s technologies for creating web applications is the most suitable to use when constructing web portals. From a great amount of different technologies, five of the most widespread and well known technologies have been chosen and closely examined on nine different web portal specific criteria. The result from this evaluation is a table where all the grades for each technology is displayed. With the help of this table, it is possible to get an idea about what technology is the most suitable to use when constructing a specific web portal.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.

We live in a society that is constantly developing and where technology is getting a more major roll. The school is a very important part of our society and should therefore develop in pace with the surrounding society. Having this in our thoughts we decided that our purpose for this case study should be to study the importance of technology in a learning environment for seventh graders in a specific school. To be able to find this out, we have used constructivism and sociocultural perspective on learning. We have gathered our empirical data for the study through participant observations and a focus group interview.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

This study has been carried out at Södra´s 31 local forestry districts and within six plant terminals. The production and sale of seedlings at Södra is managed in collaboration with ?Södra Odlarna?. Approximately 35 million plants are cultivated each year, providing Södra´s members with a wide choice of high quality plants. The seedlings are nurtured at nurseries before transferred to plant terminals where they are stored and watered.