The built environment should be accessible for everyone. A residence shall be functional without creating a handicap for people who have a disability from birth, caused by an accident or of old age. A residence that is accessible creates equal conditions for everyone.In this report the accessibility of newly built blocks of flats in Uddevalla city from 1990 until today are interpreted. One project that is yet to be built is interpreted and compared with the already existing projects. The apartments of seven projects have been analyzed according to today?s regulations of accessibility.

Bachelor thesis in Business administration, School of Business and Economics at Linnaeus University, Controller, 2FE05E, spring semester 2013 Title: Non-profit sport associations management control- A multi case study of management tools Authors: Christoffer Ahlgren, Emelie Andersson and Emelie Nilsson Tutor: Anders Jerreling Examiner: Elin Funck Background: Non-profit sport associations activate a large number of people in Sweden and have a great impact on the social community. Because of the increasing complexity to operate sport associations some are experiencing serious financial problems. The daily financial work has a major impact on how the future unfolds for the sport associations. An adverse economy not only creates complications in the economic field, it also affects the sport itself. Purpose: Our purpose with this paper is to describe and explain how the economy is controlled in non-profit sport associations and the tool that is used to support this process.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

The global spread of the Internet has enabled busniesses and consumers in all industries to be better informed. Consequently, the buying process has appeared to become different from what tratditional models implies. As the buying behaviour among customers is evolving, selling companies are responding to this change. This thesis evolves around the consequences that the developing relationship between buyer and seller in business-to-business companies has led to. The topic in focus is the buzzword and phenomena "content marketing" with its marketing and selling strategy.

In the fluidized bed furnace at Rönnskärsverken, Skelleftehamn, sulphur-containing ore concentrates are roasted in order to remove about 50% of the sulphur in the incoming ore concentrate. This occurs in order to reach the goal of a matte containing 55% of copper in the following smelting process. At the same time as the ore concentrate is partially roasted pollutions as arsenic, antimony and bismuth are expelled. Earlier made thermodynamic calculations of equilibrium suggested that calcium and magnesium form stable compounds with arsenic and thereby inhibit expellation of arsenic in the fluidized bed furnace, an element that is undesired. The purpose of this thesis work was to gain knowledge of the mechanisms behind the formation of these stable arsenic compounds.

To produce fine fibre wool as a complement to lamb meat production, Merino and Svea sheep are currently being crossbred in the county of Jämtland. The aim of this study was to evaluate growth and wool quality of the first crossbred lambs. In addition, a literature study about nutritional effects on wool production has been carried out. The literature study showed that fine fibre wool should foremost be achieved through directed breeding. Nutritional requirements of the sheep at different stages of production should determine their feeding.

Varje år ökar antalet äldre personer och i samband med den ökningen blir även antalet äldre personer med körkort allt fler. Med åldern är det vanligt att reaktionsförmåga, syn och hörsel försämras vilka alla är viktiga egenskaper för trafiksäkerheten. Läkare i Sverige är skyldiga att rapportera till Transportstyrelsen om en individ inte anses vara lämplig att köra bil. Att läkare över huvud taget tar upp körkortsfrågan med sina patienter sker endast i 60 procent av fallen och därmed fortsätter många olämpliga körkortsinnehavare att köra bil. Majoriteten av länder inom Europeiska Unionen (EU) har någon form av övre åldersbegränsning i körkorten där körkortsinnehavarna måste genomgå en kontroll för att få körkortet förnyat.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.