The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Med gallringseffekt menas att träden efter en gallring ökar sin diametertillväxt. Denna effekt har traditionellt tillskrivits den minskade konkurrensen om ljus och näringsämnen mellan träden. En alternativ förklaring till gallringeffekten är att vindpåverkan per träd blir högre i det gallrade beståndet, vilket leder till större svajningar för träden och därmed en ökad diametertillväxt. I studien undersöktes ifall vindens påverkan är en del av gallringseffekten på tall (Pinus sylvestris L). Lokalen för studien var SLU:s försökspark i Siljansfors utanför Mora. Omgivande tätheter av stamantal, grundyta, kronvolym och kronmantelyta beräknades på flera avstånd från varje individuellt träd.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.

Hypertension is one of the most common reasons for visiting primary care. It is one of the most important modifiable risk factors for cardiovascular disease, suffering and death. Lifestyle change, such as increased physical activity is the foundation of treatment of hypertension. Lifestyle change starts as a process in which patients can be helped by a nurse through conscious communication, educate and support increased physical exercise.AimThe aim of this study was to investigate the district nurse´s experiences of interacting with patients with hypertension about physical activity.MethodIndividual qualitative study. Ten nurses from health center were interviewed.

The construction industry is often criticized to be an industry of narrowness and slow of change. The traditional construction process is considered to create gasps of inferior quality, delays and increase of disputes. Meanwhile, productivity is lower compared to other industries and the prices are increasing. In this debate, it has been assumed that the reported figures are monitoring a reflection of reality, but there might be an error in the statistics which suggests that the focus is at the wrong place. A study of the monitoring and the measurements of the results are to consider, instead of spending time and resources on issues and actions The Last Planner System is an executive planning tool which creates a predictable workflow and creating value throughout all the different stages.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

In todays high-technological society where the Internet plays a central role in our day-to-day life, many e-retailers are not able to attract customers to complete a transaction on their website. In order to succeed, many e-commerce sites must improve several safety aspects regarding online payment, in order to be perceived as a reliable and secured retailer. The purpose of this paper is to investigate if increment in various combinations and aspects in online payment will in fact improve the customer's perception of the e-retailer and result in completed transactions. In order to investigate this aspect, an experiment was conducted to be able to compare eight independent groups, that each had been exposed to a different security scenario on the online payment website of either a known or unknown retailer. Our results clearly prove that perceived security of the retailer's payment website increases willingness to purchase from the retailer.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Introduction: Anxiety and depression are common among patients enrolled in psychiatric outpatient care. Ear Acupuncture is an alternative form of treatment that has been shown to relieve anxiety and depression in previous studies.Aim: To evaluate ear acupuncture as a group treatment for depression and anxietyMethod: A psychiatric outpatient clinic has been offering group treatments with ear acupuncture for anxiety and depression for 5 weeks. Participants of the study have answered self-rating scales Montgomery Åsberg Depression Rating Scale, Beck Anxiety Inventory and Sheehan Disability scale before and after the treatment period. Material was collected in the period 2008-2012 and has been analyzed in SPSS.Results: Data from 31 patients were included in the study. The results from the study showed a significant difference, between the measurements before and after treatment, with a reduction of the average values in the three different scales.Summary: From this study, it is difficult to draw any conclusions about the effect of ear acupuncture.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

This report evaluates whether an interpreted high-level garbage collected language has enough information about its memory behaviour to make better cache decisions than modern general CPU hardware.With a generational garbage collector, depending on promotion algorithm and generation size, around 90% of all objects never leave the first generation. This report is based on the hypothesis that, because of the low promotion rate, accesses to higher generations are sufficiently rare not to benefit from caching.To test this hypothesis, we built an operating system with a Scheme interpreter in kernel mode, where the interpreter controls the cache. Generic x86 PC hardware was used, since it allows fine-grained control of cache decisions.Measurements of execution time in this interpreter show that disabling the cache for generations higher than the first does not give any performance gain, but rather a performance loss of up to 50%.We conclude that this interpreter design is not an improvement, but cannot conclude that the hypothesis is false in general. We suggest building a better CPU simulator to gather more data from which to make better caching decisions, moving internal interpreter data structures into the garbage collected heap and modifying the hardware to allow control in the currently rigid dimension of where data is cached---for example separate control of instruction and data caches and separate data caches for different areas of memory..