The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Students? performance in school is dependent on the indoor climate. This report studies four schools regarding air quality and thermal environment. A survey was made at the schools as well as measurements of carbon dioxide, dampness, thermal climate and, as an indicator for the furniture?s capability to collect dust, shelf factor and fleece factor.

Bakgrund: Den vanligaste cancerformen hos kvinnor i Sverige är bröstcancer. Varje dag insjuknar 15 ? 20 kvinnor. För bröstcancer finns olika behandlingsprinciper: Kirurgi, strålbehandling, hormonell- samt cytostatikabehandling. Bröstcancerbehandling för kvinnor innebär såväl fysiska och psykiska svårigheter som resulterar i en förändrad kroppsuppfattning.

An organism that is transferred from one place to another, causing major problems to the native species is termed invasive. Its natural dispersal across barriers may have been prevented but as man has turned able to rapidly travel all over the world organisms are brought to sites where they were never before observed. Adding the increasing global warming organisms may find it necessary to move around even further. This might cause major disturbance to the biological diversity, and hybridization and homogenization is one of many scenarios that could disturb the native diversity. In Sweden more that 2/3 of all alien plant species have been introduced to disturbed areas and the major introduction mechanism is gardening.

This study examines some students? attitudes towards mathematics in grade 2-4. When studying students? attitudes questionnaires and interviews are often being used as methods. In this study we used a more rare method.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

Studies conducted on event marketing have mainly focused on larger events. Managerial implications, marketing techniques, and theories in the field have hence dominantly addressed events of larger nature. Event marketing however is a growing phenomenon in the marketing mix. Brands are using event marketing to a greater extent. Brands are increasingly using small events as a marketing tool in order to create brand awareness and brand image; this goes for both small brands and large brands.

This thesis discusses model based tracking of radar echoes in tanks with liquid content. The errors in the measurements are not always random in these cases, and the interference that occurs when nearby echoes moves in relation to each other makes tracking difficult. The tracking problem can be broken down to four parts; track initiation, track destruction, association of the measured echoes to the tracks and to update the tracks with the associated echoes. The radar measurement is primarily made on the surface. However, additional echoes from the tank floor or other structures and double bounces are normally present.

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

Arbetet bygger på att de informationssystem som används idag men som blir allt äldre och därigenom inte klarar de krav som ställs på dem. Detta medför att informationssystemen måste migreras till modernare plattformar, då företagen dels inte klarar sig utan dess nuvarande funktionalitet och dels måste vidareutveckla systemen.Detta arbete tar upp olika sätt som detta kan genomföras på och vilka problem som kan komma att uppstå när detta sker. För att kunna undersöka detta så genomfördes ett antal migrationer. Språken som migrationen kommer att ske mellan är Visual Basic 6 och Visual Basic .net. Migrationerna kommer att ske med hjälp av ett migrationsverktyg, samt ett ramverk som i arbetet skräddarsys för just arbetets typ av migrationer.Det arbetet kommer fram till är att det sker problem vid användande av ett verktyg och även att det inte ger tillräckligt med respons på vad som gått snett under migrationerna..

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

The purpose of this degree project was to build laboratory equipment for a new course in power electronics that starts this autumn 2010 at Uppsala University. The equipment is intended for student labs and it covers the most important areas of the course including rectifying, buck-/boost-converters and PWM-modulation. It is built as one sealed unit where all the electronics are built-in but visible and it has a connection board where students safely can connect the different circuits. The project has advanced from theoretical studies of circuit design, choosing of components and simulations to drawing the printed circuit board (PCB), soldering, case building, final testing and troubleshooting - basically most steps from an early idea to a final product. Measurements on the final product gave about the same results as the earlier simulations of the circuits and the result is overall satisfying..

My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.