The Swedish road transport sector relies almost completely on fossil fuels. In 2007, as much as 96 percent of the total sales of fuels was made up of petrol and diesel, while at the same time the share of total emissions of greenhouse gases in Sweden that came from road transports amounted to close to 30 per cent. Sweden is by no means worse off than any other European country in these respects. In order to address the questions of high oil dependence and CO2 emissions the European Commission has proposed a reinforcement of the legislative framework, with a 10 percent minimum for the market share of biofuels in 2020. Furthermore, the proposed target is binding for the member states, unlike the current voluntary target of 5.75 percent by 2010. More than doubling the usage of biofuels in only a bit more than a decade will most likely not be possible without policy interventions.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

The Swedish government has a goal of achieving a fossil-free vehicle fleet in 2030. Heavy transport constitutes a significant part of Sweden's transportation sector and the vehicles are driven almost exclusively by fossil fuels. Siemens has developed eHighway, a concept for electric road systems enabling electrification of trucks, in order to reduce the environmental impact of heavy transports. This study aims to investigate the potential that eHighway has on transporting iron ore from the mine of Mertainen to a processing plant in Svappavaara. Electrified trucks are compared with conventional trucks, and diesel and electric trains.The evaluation was made with respect to energy consumption, environmental impact, and cost.

The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Background: Goodwill has always been frequently discussed and a lot of scientific research has been done regarding factors that affect companies? impairment of goodwill. Previous research has concluded that companies reporting low results are more prone to do impairments of goodwill than companies reporting better results which possibly can be seen as a form of earnings management.Purpose: The purpose of this essay is to examine if goodwill impairments occur to a greater extent among Swedish listed companies when the companies are reporting lower earnings. A subsidiary purpose is to see if there has been an improvement since 2008 regarding the size of reported goodwill in comparison to equity in the years 2009-2011. And to analyze the development of the companies goodwill impairments in relation to reported goodwill.Methodology: Three quantitative studies have been performed for the years 2009-2011 where all the listed companies on NASDAQ OMX Stockholm have been included.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The purpose of this randomized controlled study was to investigate the effect of internet- administered guided self-help for women suffering from psychological problems following traumatic childbirth. The eight-week treatment program consisted of written chapters based on cognitive behavioral therapy. 56 participants were randomly assigned to a treatment group (n = 28) or a waiting list group (n = 28).The results showed that post-traumatic symptoms decreased as a result of the treatment, with large within-group effects measured by both the Traumatic Event Scale (TES) (d = 1.33) and the Impact of Event Scale-Revised (IES-R) (d = 1.3). The difference between the groups was only significant when measured by the IES-R in which case the between-group effect was large (d = 0.97). The proportion of the participants who showed clinically significant improvement was considerably greater in the treatment group than in the waiting list group.

The objective of this study is to understand how people with psychiatric diseases who are enrolled at a psychiatric clinic experience the recovery process and which internal motivations and external factors influence the process. The study is based on interviews with five people who have been enrolled at a psychiatric clinic. Another aim of the study is to understand how the importance of the outpatient care for the personal recovery and the improvement opportunities of the support from the rehabilitation unit that the interviewees see. The study is qualitative and abductive approach was chosen. This means that the study is based on empirical data supported by established theories.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.