Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

The interaction between the driver, the car and the road is essential for the road safety. This case study focuses on the road condition and its effect regarding road safety issues. By studying and isolating the road condition aspect and its contributing role to the accident occurrence, the aim is to explore their relationship, as well as highlight the road parameters that are commonly associated with accident occurrence. This result will be used to develop and increase awareness of the impact of poor road alignment and poor road surface conditions on traffic safety, in order to prevent these accidents from occurring. The road parameters chosen for this study include side friction, cross slope and rut bottom cross slope, road texture, curvature, drainage gradient and rutting.The case study was limited to lv 360 in Va?sterbotten, where all accidents with an unclear cause of the accident were studied, between 2003 and 2012 were carefully studied and assessed based on the condition of the road at the time of the accident.

approaching Boden deals with the approaching of a city, both in a physical sense ? along the road ? and in a spiritual sense ? in mind. The physical encounter with a city is represented by the experience of the road and its surroundings, while the spiritual encounter is represented by the idea of the city that we already have, or will get, in our minds. We have in this degree project approached Boden through a thoroughly analysis of both the entrance roads and the city itself. In this degree project we are looking for ways of how to create characteristic and interesting entrance roads to a city, with Boden as an example. This demands knowledge about the problems involving entrance roads as well as the distinctive features of the city.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

This work derives from the question ?What is a beautiful road??. The question is being discussed in interviews with two employees at the Swedish National Road Administration and two former members of the ?Council of environment and beauty? at the Swedish National Road Administration. The interviews are summarized in my own discussion about the concept of ?Beautiful roads?.

Assessment of impacts on nature and reindeer husbandry by the considered mountain road between Borgafjäll and Saxnäs- Swedish National Road and Transport Research Institutes method for assessment of damage to heritage assetsThere are plans regarding the building of a new road from Borgafjäll/Båtas to Saxnäs, and two road alternatives have been presented. The road has been localized to an area which is protected as a nature reserve and listed as a Nature 2000 area. This report aims to determine the effects on the Nature 2000 area and reindeer husbandry, and to be a source of knowledge for future environmental impact assessment in that project. In order to assess the impact on nature values and reindeer husbandry a method from the Swedish National Road and Transport Research Institute (VTI) has been used. A literature review has been made to prescribe the effects and consequences.

The technical achievements that have occurred in recent years have led to a greater use of the Internet around the world. Today, more and more people are using virtual communities, a place where communication occurs with people who have similar interest. Due to the option of being an anonymous user, the concept of trust plays a big part in how virtual communities are working. It is therefore of interest to investigate how trust develops between users in virtual communities. This report asks the following question:"How is trust formed between users at a virtual community?"A qualitative and netnographical study was conducted to answer the question above.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.