?ÄTA-work? (Changes, Supplementary and Retiring works) is more or less common in all construction projects whether it is about houses, roads or railways, in the planning stage, or in the construction stage. For the Swedish Transport Administration, which is the largest purchaser of infrastructure in Sweden, ÄTA-work is a hotter topic than ever.Economists and managers want to draw conclusions on the projects share ÄTA-work, while the project manager is concerned about whether it is possible to draw any conclusions at all as each project is unique in itself and has its own merits. There is a big variation in the amount of ÄTA-work in different geographic districts in the Swedish Transport Administration.This study shows that the Swedish Transport Administration does not have a unanimous approach regarding the management of ?ÄTA-work?.

Taking a qualitative approach, this research investigates different theories and methods for creating parks that people will cherish and visit during their daily life. It also takes on the task to understand how principles of developing recreational values in a small forest is affected by the addition of a new element to the landscape, i.e. a major highway. Data was collected through the combination of focused literature review and study trips. This provided a framework which in turn was applied to the subject of the study, i.e.

Construction projects are generally designed as a general contract or a complete contract. In a general contract the commercial contract that is being used is AB 04 and related advice and instructions, AMA AF 07. In AB 04 there is an insurance requirement that stipulates that the contractor shall take all risks and liability insurance for the contract where the client must be co-insured.Construction law is almost exclusively regulated by the various standard contracts, one of those is AB 04. The Construction Contracts Committe is an organization that has published the standard contracts in this area of law and also the advice and instructions to help the parties to understand the agreements. The insurance requirement occurs in an area of law that is complex and the meaning of the concept is not entirely clear, nor which of the parties? interests and responsibilities that are covered by the types of insurances that are provided by the insurance requirement.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

This final thesis is carried out at BAE Systems Hägglunds in Örnsköldsvik. The mission was to construct and integrate a new semi-active damping unit in the terrain vehicle BvS10. Questions that came up during the process, among others, was how to mount the damping unit to the vehicle in a flexible way without exposing it to unnecessary wears.A generation of the concept is made in 3D using CATIA V5 of a possible solution to the problem. The idea is to weld the unit to the skid girder which is one of the main constructions of the track system. In this way the damping unit will come closer to the track system, which will partly protect it from impacts from below and minimize current problems with breaking forces in the torsion shafts.The complete construction was then analyzed, first by theoretical calculations and then with the FEM-tools in CATIA V5.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

NCC Construction Sverige AB är ett byggföretag inom NCC AB. Företaget är verksamt inom hus- och anläggningsbyggande, bostadsbyggande, bostadsutveck- ling samt service i Sverige. År 2004 hade man en omsättning på cirka 17,3 MDR SEK och antalet anställda var cirka 7 600. I varje byggprojekt finns alltid olika risker, vissa får större konsekvenser än andra. Ansvars- och entreprenadskador som inträffar i projekten kostar mycket pengar för NCC Construction Sverige AB.

The construction industry is often criticized to be an industry of narrowness and slow of change. The traditional construction process is considered to create gasps of inferior quality, delays and increase of disputes. Meanwhile, productivity is lower compared to other industries and the prices are increasing. In this debate, it has been assumed that the reported figures are monitoring a reflection of reality, but there might be an error in the statistics which suggests that the focus is at the wrong place. A study of the monitoring and the measurements of the results are to consider, instead of spending time and resources on issues and actions The Last Planner System is an executive planning tool which creates a predictable workflow and creating value throughout all the different stages.

This study concerns the complete oeuvre by the British author Helen Zahavi: Dirty Weekend (1991), True Romance (1994), and Donna and the Fatman (1998). Her novels are here read as a trilogy dealing with the dialectics of gender and violence in 20th century discourse, drawing on theories of how the construction of subjects is produced by power, of the relation between power and sexuality.The heroines of Zahavi?s novels try their best to move about in a world where their freedom of movement is limited to their female identity. In Dirty Weekend the protagonist tries to shoot her way out, claiming revenge on every man that is forcing himself upon her. She gains some freedom of movement by refusing subordination, but does not really change the order of power.

This essay focuses on the construction of so called "computer game addiction" or "computer game abuse" in the Swedish press during 2000-2006. During this period computer game addiction went from an obscure phenomenon to a legit reason for the involuntary commitment of a fourteen-year-old.The study's theory is based on several social constructionist ideas. Kitsuse and Spector's theories about constructing social problems as claims-making activities are used for understanding the actions of the individual and groups involved. Hewitt and Hall's article about quasi-theory is used to explain the construction of explainations for the new social phenomenon. Blumer's five-stage model is used for categorizing the construction of the new social problem.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

The foremost objective of business organizations is to generate value for shareholders and to opt for strategies which optimize it. Hence it is of key concern for business leaders to appreciate how operations best are run to maximize value creation. This study explores how financial theory can reveal the link between one particular business strategy and the corresponding effect on shareholder wealth. The question in focus is whether construction companies can enhance their value creation by implementing shift-work to increase the weekly production rate. The thesis particularly targets apartment block projects in Sweden and has the construction company Peab AB as primary object of study.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.