The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The task in this thesis is the steering of one of Saab Bofors Dynamics robots using Sliding Mode Control, a method they never used before. The robot constitutes a system which in addition to perturbations and uncertainties due to modeling imprecision, hold the difficulty of being highly time variant. In order to be able to keep required performance with uncertainties and modeling imprecision present, the use of robust control methods like Sliding Mode Control is necessary. SMC is based on the states of the system being forced to stay on or in the direct vicinity of a hyper plane in the state space which is chosen in a way that gives the system dynamics desired properties. Other advantages with sliding mode are reduced order dynamics on the switching surface and total insensitivity to some uncertainties and perturbations.

The use of temporary workers gives companies the opportunity to be flexible, by avoiding hiring and dismissing workers because of economic conditions and trends in demand. The management control in use at the company has the purpose of influencing employees? behaviour to act in the company?s best interest and towards its goals. The management control should also influence the behaviour of the temporary worker. The companies have to create motivation and commitment among the temporary workers although they are employed by a staffing agency.

The return of large predators to regions where they were previously extirpated has created a need for knowledge about their effect on prey species, not only their lethal but also their behavioural or risk effects. In this study the behavioural risk effects of brown bear (Ursus arctos) were tested on fallow deer (Dama dama), roe deer (Capreolus capreolus), red deer (Cervus elaphus), moose (Alces alces) and wild boar (Sus scrofa). This was done by using patches of fur to simulate the presence of the novel predator (brown bear), a novel nonpredator (reindeer (Rangifer tarandus) and no fur as control. These three treatments were then compared. The response variables measured were increased vigilance, decreased feeding time and change in patch use.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

A great number of empirical researches show that hedging is associated with higher firm value, particularly hedging interest rate and exchange rate. However, there is no clear support for value-added risk management hypothesis in the case of producers of commodities. Moreover, according to Shrand and Unal (1997), there are two types of risks, core business risks (or core risk) and homogeneous risks (or non core risks), which are based on a firm's comparative advantages with respects to the source of risk. Firm can earn economic profits for bearing core risks in which it has a comparative information advantage. Firm earn a zero economic rents for bearing non-core risks, where it has no advantage information than its competitors.

The purpose with this paper is that trough a description of the management control at Jitech AB find out if traditional management control have been abandoned for benefit for modern management control and in which extent the transition have happened. Further is the second purpose with this paper to find out which decisions that lies behind the design of the management control and how these are in opposition to with the theory..

The aim with this thesis is to investigate the risk management at the department Road construction, The National Road Administration Region Mälardalen. The aim is also to study how the risk management could be improved to better support the project leaders. Included in theses aims is to examine potential problems with the current risk management and to suggest changes. It is of utter importance to define the concept of risk, to study how risk can be measured and in which ways risk can be analyzed. In doing so, a literary study has be done and fourteen respondents has been interviewed.Risk is to be seen more as a concept than a quantity.

There are many aspects which must be taken into consideration when studying individuals? need of exercise. The study investigates if impulsivity and Health Locus of Control affect the continuity of physical practise. The main presumption was that individuals with high impulsivity, high Powerful Others and high Chance Health Locus of Control, would have a significantly harder time to maintain a continuous physical activity. The survey used two standardized tests to measure impulsivity and Health Locus of Control and in order to be able to measure the insensitivity and the periodicity of physical exercise, a test was developed by the authors.

Bakgrund och problemdiskussion: Under årens gång har det inträffat flera företagsskandaler. Det har sett bra ut på ytan men insidan har visat motsatsen. Fasaden kollapsar till följd av bristande kontroll. Intern styrning och kontroll och COSO:s Internal Controll ? Integrated Framework blir allt mer aktuellt för att få ordning och reda.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

This thesis concerns the control of outsourced interorganizational buyer-supplier relationships in the low-price fashion industry. A qualitative case study has been performed on two supplier relationships of a low-price fashion company. By identifying specificities of the industry and relating them to control problems and their implications on control solutions, the thesis has established a relation between industry specific characteristics and the way companies in the industry control their supplier relationships. The analysis is based on a theoretical framework created by Dekker (2004). Amongst other factors, the difficulty to define, quantify and measure the design variables of a fashion good, the high heterogeneity between individual products and the difficulty to predict the trend based demand, create high coordination requirements as well as appropriation concerns solved through extensive formal control.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

According to the basic values of the Swedish Trotting Association the horse and its welfare should always be held in highest consideration. One part of the animal welfare work in the organization is to ensure good horse management practices by controlling all active trainers through the local licensing committees situated at the Swedish racetracks. The Swedish Board of Agriculture stated that high quality animal welfare assurance programs used by the industry organizations can be used in the risk assessment of the official animal welfare control to make the official control work more effective and the ambition of the Swedish Trotting Association is to establish an animal welfare assurance program which may be approved by the Swedish Board of Agriculture. Racehorses are exposed to welfare hazards both in their management as well as during training and racing and factors like handling, training, feedstuff, stable environment, medication and the possibility to express natural behavior all affect the welfare of the horses. The aim of the project is to investigate and evaluate the animal welfare work performed by the licensing committees and to give advice on how to improve the industry?s animal welfare control.

The accounting scandals that have attracted attention in recent years have led to internal control becoming a more central part of business activity. Doubts about what firms actually do have increased, all caused by the attention of accounting scandals. To counter this, frameworks and laws evolved and gained a significant role in the organization and its surroundings. The aim of the present study is to find out how four companies in the Kristianstad region are working to ensure its internal control and how they work to minimize risk and reduce uncertainty. We have used a qualitative method and interviewed a person in a senior position in each company.