This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The aim of the study was to examine the reading ability of adultswith intellectual and/or communicative disabilities. The group adults withintellectual and/or communicative disabilities consisted of 66 individuals.One control group consisting of 36 children aged 7 to 12 years and onereference group consisting of 14 adults were used. Participants were given anumber of language and reading related tests. Adults with intellectual and/orcommunicative disabilities had significantly lower results than the adultreference group regarding all tests and significantly lower results than thechild control group regarding phonological processing. There was nodifference between adults with intellectual and/or communicative disabilitiesand the child comparison group regarding word decoding and readingcomprehension.

Altmetrics, a subfield of informetrics, is still in development. The aim of this thesis is to explore; the significance altmetrics may have in the LIS field, and to define the new perspectives altmetrics offer in comparison to traditional metrics. The research questions are:- How can altmetrics affect research assessment?- How does altmetrics position itself towards traditional metrics?- How could altmetrics influence the LIS field?A qualitative content analysis was used as a method. The analysis of a sample of ten peer reviewed articles was based on a coding scheme with eleven codes.

Every year many individuals became sick listed, it could be for a long time, or a short time but irrespective there will beeffects on the individuals life and on the society. The aim of this study was to describe some relevant psychosocial relationships in the workplace that effect that women become sick listed. The method of the study was a literary study which was based on a number of scientific articles. The result of the study showed that many different factors effects the risk of becoming sick listed. Factors that causes sick leave where many and individual, but lack of social support, bullying, unstructured work environment and theworkplaces management, imbalance between demands and control and the women's situation were factors that had a big influence.

This report presents an investment calculation based on an assumed initial investment of a new saw line to an existing sawmill. In order to get as close to reality as possible, we have received data material from northern forest owners who recently made an initial investment in their sawmill in Kåge. In order to calculate and evaluate investments are several different methods, but we, we have chosen to use the discounted cash flow method. The method sums up with the help of a fixed cost of capital together with any future costs and revenues, thereby giving a present value of the investment. We also do a sensitivity analysis to examine how selected factors affect the investment research they change. The study is carried out to a fictitious investment, and therefore the result should not only be studied as a result of the figures. The purpose of this study was that with the help of an investment calculation studying the profitability of a hypothetical investment, and by means of a sensitivity analysis to study the sensitivity of investment to changes. The result demonstrates that the calculations according to the present value method requires a lot of information of the prospective investment.

Developments in milk production are heading towards fewer but larger herds where the milking process is often fully automated. Automatic milking systems were launched in the 1990?s and in the year 2010 the Automatic Milking Rotary (AMR) was introduced. As a rule there are no supervision personnel present during the milking event in systems with automatic milking. This means that there is a risk that cows can be incompletely milked in one or more udder quarters, for example if the robots fail in attaching the milking cups or if the cow kicks off the milking unit.

Bakgrund och problemformulering: Tillgång till information är en naturlig och nödvändigkomponent för en väl fungerande ekonomistyrning inom företag. Sociala medier företräder enny våg av informationsflöde i form av ostrukturerad data. Denna ökade mängd ostruktureraddata har kommit att ställa krav på hantering och analys av denna, vilket i sin tur förändrarförutsättningarna för ekonomistyrning inom företag. Företag som kan hantera information påett effektivt sätt kan utveckla strategiska konkurrensfördelar. Dock finns det begränsadkunskap om hur information från ostrukturerad data kan och ska hanteras inom företag.Företag som inte anammar nya tekniker för att hantera och analysera stora mängderostrukturerad data riskerar att gå miste om viktiga konkurrensfördelar.Syfte: Att identifiera, undersöka och analysera hur information från sociala medier påverkarentreprenörsföretags ekonomistyrning.Metod: Undersökningsmetoden utgörs av en avslöjande singel casestudie.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

IT has become more evident in most organisations and has grown to be a part of the infrastructure rather than a tool for competitiveness. Therefore focus should now lie on how IT is adjusted to the business rather than on the usage of IT. To make the best use of IT in the business the CIO needs to start think more business-oriented instead of as before, technology-oriented. To develop the IT-department in that direction the IT-staff need to start cooperate with the business and gain knowledge about stakeholders, markets and the way of working for other staff members in the business.With this as a basis, the purpose of this thesis is to investigate attitudes regarding cooperation between the IT-department and the business and if there is any difference if the CIO has business related background or not.To fulfil the purpose a quantitative investigation with the help of surveys was conducted. The sample consisted of 18 companies with 100-200 employees in the area of Jönköping.

NMD 100 is a notes and media dispensing machine, manufactured by De La Rue Ltd, located in Flen, Sweden. The customers, mainly bank offices, have expressed a need for a more comprehensive description of errors occurring from time to time in their machines. In order to acquire a BSc-degree in Computer and Electronics Technology at the University of Linköping I have carried out a diploma work, regarding new computer programs to fulfil the customers? wishes. The machine NMD 100 is connected to its PC through handshaking.

Background: As a part of a national health control program, Statens VeterinärmedicinskaAnstalt performs diagnostics to screen flocks for certain pathogens causing high mortality,morbidity and/or serious economical losses. There are several viruses in the programincluding IBDV (infectious bursal disease virus), IBV (infectious bronchitis virus) and NDV(Newcastle disease virus). Method: 96 serum samples were collected from different poultryflocks in Sweden and analyzed by ELISA, which are currently used in the health controlprogram as well as by a commercial prototype of a multiplex immunoassay manufactured byLuminex Corp., which is currently under evaluation at the United States Department ofAgriculture USDA. This 4-plex assay detects antibodies for the three above-mentionedviruses as well as antibodies of avian reovirus. In the context of this study the ELISAs run inroutine diagnostics as well as a REO ELISA were used as the standard for comparison.Result: The antibody concentration in serum from vaccinated chickens was high while theantibody concentration level in serum from not vaccinated chickens was low.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

Purpose: To explore the purchasing function, mainly the supplier selection activities, in the fast fashion apparel industry. The purpose is 1) to explore the criteria associated with supplier selection for fashion products, and 2) to analyze the purchasing activities in order to find characteristics and trends which are considered to be strategic for the buying company. Method: The empirics consist of qualitative interviews with employees with responsibility for the companies' purchasing activities, as well as information gathered from articles, annual reports, and company websites. Result: The study indicates that qualitative criterias have increased in importance, and have become an important part of supplier selection for fashion goods. A number of characteristics where identified as important for purchasing fashion goods, which can affect choice of supplier; examples are increased collaboration, increased re-buys and increased use of logistics services.

Introduction: A job interview is for both the candidate and the company involved, an importantsituation. It might be tempting for the candidate to adjust the answers to the job in question or what heor she thinks the recruiter wants to hear. This behaviour is a part of what socialpsychology would callimpression management. This term means that you try to control the impressions you send out andaccordingly adjust your behaviour for the current situation.Purpose: Candidates usage of impression management is a widely debated subject where theresearch mainly has focused on the candidates, their strategies and the efficiency of impressionmanagement. Our purpose with this thesis is therefore to see how recruiters experience candidatesimpression management in a job interview, how they handle it and what level of acceptance they havefor it.Theoretical perspectives: The theories and previous research used as models for explanation andbasis for discussion is mainly Erving Goffman´s (1974) dramaturgical perspective and thoughts aboutimpression management and Mark R Leary´s (1995) theories concerning impression managementtactics.