The aim for the study was to examine a harwarder´s (combined harvester-forwarder) productivity when harvesting forest fuel in first thinning stands that contains Lodgepole pine and calculate the economy of the harvesting work and estimate the quality of the thinning . The field study area where located near Arvån, about 15 kilometres south ?east from the city of Lycksele. The field studies were taken place in three different stands. All tree stands had the same tree age, but the tree species combination and the density varied.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove Residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine Residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

The focus of this two year master?s thesis in Library- and Information science is the study of two Swedish Public Library buildings with the examples Lomma and Halmstad. The main goal and purpose of the thesis is to try to uncover which views and values of the public library are expressed in the examined libraries; and to what extent these views manifests are shown in its architecture.The theoretical framework is based on Raymond Williams?s cultural concepts of effective, dominant culture and the two extremities of this culture, called Residual and emergent cultures. A second aspect is Yi-Fu Tuans concepts of Space and Place.

After parturition the energy demand for milk production is greater then the energy provided from the diet. The cow mobilises therefore body tissues to compensate for the energy loss. Live weight and body condition scores decreases as a consequence of the mobilisation. The aim of this study was to analyse the relationship between body condition score, live weight and subcutaneous fat depth measured by ultrasound and the changes during the lactation. Possible differences between Swedish Holstein (SLB) and Swedish Red and White Cattle (SRB) were also investigated.

This study tests two financial valuation models empirically by valuing three stocks from three industries, with the purpose of studying how well valuation models work empirically and to make a forecast. The models which will be tested are Residual income valuation and discounted cash flow. Nine stocks will be picked strategically from the Swedish stock market and additional analysis will follow in the analysis chapter.Based on analysis and valuation, the commodities industry has decent valuation as the healthcare industry is undervalued thanks to the high valuation of AZN. The energy industry has low value due to the capital intensive nature of the industry. When it comes to the models and their practical implementation, DCF has been the most problematic to apply empirically whereas RIV was better but it still shows extreme values, which teaches the student the clear difference between theory and empiri..

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

Aluminium sulphate (Al2(SO4)3) is usually added during the drinking water treatment processin order to precipitate organic and inorganic material, resulting in aluminium-based drinkingwater treatment Residual sludge (WTR). Since 2003 Swedish law no longer permits WTR tobe deposited in lakes, and there is an interest to explore the possibility to utilize WTR as soilamendment. The aim of this study was to examine the effects of WTR application on cropgrowth and concentrations of macronutrients and trace elements (including micronutrients andpotential toxic elements). A greenhouse pot experiment was conducted with three soils; a clayloam rich in phosphorous (P), a loamy sand rich in P, and a silty loam with a low soil Pconcentration, and two crop species Italian ryegrass (Lolium multiflorum Lam. cv.

Goal: To describe which evaluation method is used by Swedish retailers to assess a potential retail location and to describe to what extent the retail brand effects this strategic decision. Design: Analysis of ten interviews with companies within five retail sectors in Sweden. Main study: Indication of what methods are used to evaluate a location and how a company's retail brand affects the decision. Results: Retailers use a mix of theoretical methods to evaluate the location attributes and possible profit. Most common among mixtures was an application of the analog method, Residual method or the checklist method in combination with a financial assessment.

 Det finns många metoder att ta till för att värdera ett företag. Teoretiskt sätt bör många av de etablerade metoderna ge snarlika resultat, men i praktiken kan resultaten skilja sig åt av den anledningen att olika metoder tar olika faktorer i beaktning. Syftet med denna studie är att undersöka möjligheten att värdera ett företag med två olika metoder och använda börsvärdet som bedömningsgrund för resultaten. Undersökningen har genomförts med en kvantitativ ansats genom att studera befintlig litteratur och forskning om ämnet för att sedan appliceras på verkliga företag och därmed utvärdera dessa. Teorin som studerades i litteraturen behandlar fria kassaflöden samt Residualvinster vilket används som bas för företagsvärderingarna.

En betydande andel individer med bipolär sjukdom upplever kvarvarande, subkliniska symtom mellan egentliga sjukdomsepisoder. Sådana restsymtom är förenade med sänkt livskvalitet och förhöjd risk för återfall i sjukdomsepisoder. Syftet med föreliggande studie var att undersöka huruvida en kort, internetadministrerad behandling är genomförbar och kan ge en minskning av depressiva restsymtom, genom interventioner riktade mot sömn och emotionsreglering. För detta syfte användes en single-subject design med upprepade mätningar (n=4). Studiens resultat visar att behandlingen är genomförbar och att den, för vissa individer, kan ge en minskning av depressiva restsymtom.

Some people who recovered from exhaustion disorder report that their lives feel more meaningful after the disease than before, despite Residual symptoms and difficulties. This experience of increased meaningfulness has been linked to sense of coherence, SOC. The research question was whether individuals with exhaustion disorder at onset has a weak SOC, and if there is a general increase towards a higher SOC value ??during the recovery process. In a cross-sectional study, data were gathered on the SOC value via the SOC 29 form.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, Residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.