A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

Borderlands. A study of the aesthetic-practical environment, its pedagogical and therapeutical properties based on the outline of two practices/institutions: the workshops at Hagastiftelsen and the bookbindery at the Kristofferschool. The perspective on education, pedagogy and therapy taken is an existential one where the main aims of an educational-therapeutic intervention is to support biographical development and integrity. In the process action research in my own bookbinding workshop as well as hermeneutic research at the workshops at Hagastiftelsen where adults with autism and other neuropsychological disorders work have been the sources of primary empirical data. Secondary sources are patient-histories written by Oliver Sacks as well as autobiographical narratives of some adults with autism.

Fönster blir idag en allt viktigare del av en byggnads klimatskärm. Det ställs därför krav på olika funktioner vilka måste uppfyllas oberoende av fönstertyp. Då glas blir vanligare i moderna konstruktioner ställs det högre krav på värmeisolerande förmåga. Cirka 35 % av en byggnads värmeförluster sker genom fönster. Detta ställer krav på tillämpning av energieffektiva fönster vid ny- och ombyggnad. Underhåll av fönsterkonstruktionerna är en oundviklig detalj och måste ske någon gång under en byggnads livslängd.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Title: future demands for office spaceLevel: Final assignment for Bachelor Degree in Facility ManagementAuthor: Rickard Blomkvist & Nils WilanderSupervisor: Lars SteinerDate: 2012-05Aim:  to examine how property owners can develop their properties to suit modern business needs and requirements of the office space they rent. Although the property owners should reason for their commercial properties will be attractive to the market. Investigate how a modern office looks like and in what are the trends?Issues used:What should property owners do to meet the new requirements of modern businesses place on the premises?How does the new work in the companies they use their premises?What is a good office today? Method: we used qualitative interviews to get answers to the issues.Conclusion: Today's office buildings have to be flexible so they can be adapted to the current tenant. Market mobility is high and the property owner must be prepared for tenants leaving.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

In Sweden, reduced tillage usually means non-inversion tillage, where primary tillage is carried out using chisel ploughs or disc implements. Primary tillage method is mainly determined by the desired soil loosening and the handling of soil residues. The effect of tillage depth was studied in field experiments in Skåne, Väderstad, Uppsala, Örebro och Västerås in different crops; spring oilseed rape, spring wheat, winter wheat and spring barley.The experiments generally had a randomized block design with the treatments mouldboard ploughing, deep chisel ploughing and shallow chisel ploughing, in some cases also shallow discing and no-tillage. In the experiments the following parameters were determined: seedbed properties, saturated hydraulic conductivity, penetration resistance, number of emerged plants and crop yield (all parameters were not determined in all experiments. Root growth and draught requirement were determined in two separate studies. There were no significant differences between tillage depths in non-inversion tillage in seedbed properties, plant emergence or root development.

Crop efficiency in utilizing available nutrients is an important factor in increasing produc-tivity and reducing the environmental impact of agriculture. Nitrogen is the nutrient that plants need in the largest quantity and wheat, along with maize and rice, is the world's most cultivated crop. In this work, the Nitrogen Use Efficiency, NUE, during the major growth period, HTP, of twelve different spring wheat varieties, were examined. The NUE was calculated as the product of uptake efficiency of nitrogen, UN, and the conversion effi-ciency of nitrogen to biomass, EN. The purpose of this work was to find if there are varietal differences in NUE and its components among the twelve varieties and to link a high NUE to specific characteristics of the varieties.

During a fire large amounts of particles and unhealthy agents occur.  Polyaromatic hydrocarbons (PAH) and toxic metals are examples among many others. These agents have a capacity to bond to particles and when the fire is extinguished, the particles can be transferred with the extinguish water into the soil and to the groundwater.Recent studies in particles have been conducted. A study by Ulrika Iverfelt (2014) reviled that the particles from a fire contained large amounts of both PAH and metals, which is consistent with earlier analyses. Her column experiments with particles in the size ? 11 microns and ?100 microns in silica sand, reviled that the larger particles was immobilized because the transportation was influenced by sieving or physiochemical particle and surface interactions.The transport of the particles in soil and groundwater is regulated by two main mechanisms: physiochemical surface interactions and straining.

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.