This is a case study of the planning and building of a new IT education facility when thedepartment of Media Technologymoved its operation to Flemingsberg and the main campus, due tothe termination of Campus Haninge at Södertörn University, Stockholm, Sweden. The study isbased on a case study an on administrative material from the process such as emailscorrespondences, policy documents, contact reports etc. The material is analysed using qualitativecontent analysis and the different observations done are distilled into four recommendations,aimed at being able to contribute to a improved process in similar future situations, whereverneeded..

The situation that one can discern on the Swedish real estate market is that while there are several offices vacant, the need for apartments is high ? the vacancy rate for apartments is non-existent. According to the rebuilding of Skatteskrapan one will realise that the project requires a lot of money, even though it promotes the residential situation. The real estate owner experiences a risk in rebuilding real estates ? whether it will generate good yield or not.

Abstract:This thesis work has been conducted at the Real Estate Department in Halmstad.The department consists of a construction/project management-unit and an operation/management-unit.Like many other towns in Sweden, Halmstad has had a long lasting problem with indoor environment. Not at least at their preschools.Today they are constructing from current building regulations. They have learned from negative experiences which have occurred in the indoor environment in older buildings.Focus is now on healthy materials, like low emission value, energy efficiency and optimization of the building, but still with soft parameters such as cleaning, interior and choice of materials.The fixtures is provides by the real estate department and the furnishings are provides by the children and youth administration. Together they are trying to provide a great indoor environment.I have, together with the real estate department and the children and youth administration of Halmstad, investigated how to provide a good indoor environment in the preschools with small funds.In my thesis there is one theoretical part with a questionnaire survey of how the preschool staff is experiencing their indoor environment to determine where the problems often start. And a practical part with measurements to try and come down to a result that analysis the cause of the problems and also to make sure that the ventilation systems are fulfilling projected values.The measurements and the questionnaire surveys was made at Lokes preschool in Frösakull, Askens preschool in Oskarström and Gullbrandstorps preschool.There were some differences between the staff-responses at the three different preschools.At Askens preschool they feel that the premises are cleaned poorly.At Gullbrandstorps preschool they feel that the indoor-air is bad because they can´t open the windows.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Since energy simulations are used to verify that projected Residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

The purpose of this thesis is to inquire how a small town can be affected by some planned changes in the physical structure of the town, and how its inhabitants can benefit from those major changes. The town in question is Ulricehamn, and of the four projects considered, two concerns infrastructure. A new railway and a new locality for the major road, today passing through Ulricehamn. The other two projects are run by the local authorities, that is the planning of a modern town park by the lake, and a new public building for cultural purposes. There are no guarantees that any of the four projects will ever be realized, but in the process with this work, they have been considered as already a fact.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

Siemens Building Technologies (SBT) tillhandahåller och underhåller byggnadsautomationslösningar. För att serva deras underhållsorganisation har de 51 stycken servicelager runt om i landet. På dessa lager lagerhålls artiklar som behövs för att uppfylla deras serviceavtal gentemot kund. Företaget anser att det finns för mycket kapital bundet i dessa lager och att deras omsättningshastigheter är för låga. Examensarbetets syfte är att utvärdera SBT:s lagerstruktur och utarbeta ett arbetssätt som företaget kan använda vid bestämning av sortiment och lagernivåer för att sänka deras totala lagerkostnad.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Detta examensarbete har undersökt vilka möjligheter som skapas genom att använda BuildingInformation Modelling (BIM) för Livscykelkostnadsanalyser (LCCA). Arbetet beskriver förstLCCA och sedan hur BIM samt öppna standardiserade dataformat kan användas för LCCAoch för kvalitetssäkring av data. Till sist visas hur ett verktyg som räknar ut LCC direkt frånen byggnadsmodell kan utformas. Genom att kunna synliggöra konsekvenserna av olikalösningsalternativ och göra kvalitativa LCCA erhålls genomtänkta lösningar och medvetenhetom de framtida förvaltningskostnaderna. För en byggherre som också ansvarar för driften kandessa alternativsvärderingar och analyser leda till betydligt lägre förvaltningskostnader.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.