Chile and Santiago are struggling with heavy environmental problems as a consequence of urbanisation and industrialisation. In the Santiago region the air is seriously contaminated and most of the rivers are classified as heavily polluted.The aim of this thesis is to survey the industrial fluid waste situation in the Santiago region and to make suggestions on technological improvements or process changes. The purpose is also to study five different enterprises more closely and to give more detailed suggestions for improvement. Another purpose is to summarize relevant Chilean legislation.Information, provided by the supervisory authority, about the release of industrial wastewater to rivers has been analysed. Deep interviews have been made with authorities and consultants.

A survey was undertaken to understand sheep management, breeding practices and selection criteria for Red Maasai sheep in Maasai pastoralist communities in Kajiado District, Kenya. Differences between North and South Kajiado District were investigated to gain knowledge about farmers having different prerequisites and how it can affect the sheep production. The reason for keeping sheep and the specific breeds show the multiple objectives of the Maasai farmers. Adaptive traits, such as resistance to diseases and droughts, and productive traits, such as increased growth and carcass weight, were both ranked highly. In addition to this, the sheep has a social and traditional value in Maasai culture.

The theme of my exam project, the practical work and the essay will be the phenomena of dreams. The dreams you have when you are asleep, the dreaming state of mind, places where your mind takes you, when you no longer decide what to think of. It is a fascination about what our mind creates itself. This essay brings up the theme out from seeing the dreams and the unconsciousness as a source of inspiration, both in personal development and from an artistic point of view. How has the world of dreams bin used as inspiration in the art? .

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

Municipalities in Sweden are responsible for physical planning by developing a general plan. This plan contains intended land and water use for the area. This study aims to investigate the level of integra­tion of environmental issues in the general plan of Arboga municipality and also how well adapted the municipality is for climate change. Further on, the study intends to examine the focus of the gen­eral plan and at what rate the national environmental strategies are implemented in the local physi­cal planning of Arboga municipality. Methods used for this study are interviews and reviewing of the general plan itself and other key documents.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

Uppsatsen handlar om konsumenter som producerar produkter som sprids och konsumeras av andra konsumenter. Fenomenet kallas i denna uppsats för konsumentproduktion och jag har inte hittat bra litteratur om ämnet. Dagens allmänt citerade marknadsföringslitteratur som studerats i denna undersökning nämner inte konsumentproduktion som sprids till andra konsumenter. Den litteratur om Open Source som studerats nämner konsumentproduktion, men terminologin för konsumentproduktion är oklar och fokus sätts aldrig på ämnet. Litteraturen i motsats till denna uppsats nämner dessutom bara en mycket speciell och extremare variant av konsumentproduktion som produceras av högt kompetenta programmerare; istället för att som i denna uppsats ge bilden av att även andra konsumenter med andra eller ingen kompetens alls utför konsumentproduktion.

Testicular measurements and daily sperm output (DSO) are important factors affecting reproductive capacity of stallions. In the present study testicular measurements of 10 Swedish half-blood stallions were determined (height, length, width and volume). Ejaculates were collected from each stallion once daily for 10 days to evaluate some important seminal characteristics: gel-free ejaculate volume, sperm concentration, percent progressively motile spermatozoa and total number of spermatozoa (TSN). The gel-free ejaculate volume was measured with a graduated cylinder, the sperm concentration was counted in a Bürker chamber, the sperm motility was estimated in a phase-contrast microscope and TSN was determined by multiplying the gel-free seminal volume by the sperm concentration. Testicular measurements were as follows (left and right testis): height 7,5 cm and 7,8 cm, length 10,6 cm and 10,8 cm, width 6,5 cm and 6,6 cm, volume 278,2 cm3 and 293,8 cm3, scrotal width 12,3 cm and total testicular volume 572,0 cm3 .

Denna uppsats undersöker möjligheten att använda ett nätverksövervakningssystem för att även övervaka maskindrivna processer. Kan man baka ihop övervakningen av den maskinella processen och datorn som styr maskinen i ett och samma system? Detta genomförs genom att identifiera och implementera ett lämpligt övervakningssystem i en befintlig maskinell laborationsmiljö. Arbetet utvärderas därefter enligt ett antal felscenarion och även utifrån ett systemadministratörsperspektiv. Intervjuer med praktiker inom industribranchen utförs också för att dra ytterligare slutsatser..

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

Local charges may induce people to change their pattern of consumption by influencing investments and acts in certain directions. Some charges could for example give people incentives to use less natural resources. This study investigates four different local charges and whether they benefit an economical management with natural resources or not. This is carried out by investigating whether there is a polarity between local charges that may influence environmental actions or goods, and effective pollution control set to achieve certain nationally determined environmental goals. The study includes two economic perspectives and investigates on the one hand whether local charges counteract governmental subsidies and on the other hand whether the charges vary between the different municipalities since large differences may lead to cost inefficiency.