This study deals with one of the most discussed work environmental issues in the modern society of Sweden today - work related stress, its causes and how stress can affect people in their working situation. Our study is based on a questionnaire among aid handling officers in two municipalities of the middle of Sweden, and two interviews with their directors. We found that aid handling officers has a complex occupational role. We also found that the officers in these two municipalities experiences about the same level of stress.Further in the study, we will deal with whatever could be the cause of the stressful situation, using the demand/control model of Karasek and Theorell. The result shows that despite the similarity of the stress experience, the cause was shown to be different.

This master thesis holds a modelling in Simulink for a physical model of a main battletank tower, a three-phase induction motor and some mechanics. The aim of this work is to connect an earlier project at AerotechTelub, named StabSim to another called Eldris. In StabSim it has been made a Simulink model of the align and stabilisation system in a main battle tank 122 and in Eldris it has been build a physical model of a main battle tank tower. In this thesis the models that differs between Eldris and a real tower is changed in StabSim, and the parts that only exist in Eldris is added, for example a torque generating system which purpose is to make the model to behave like a real tower in control application, although it only has half the inertia as a real tower. The thesis even includes proposing a calculation of the torque that the torque generating system will actuate at the model..

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis studies the negative impact that control signal saturation may have on a controlled system. Different methods that are used to compensate for this problem are also studied and evaluated. Both sensitivity to disturbances and the effect the method has on the systems'ability to follow a reference signal will be examined. Stability will be discussed, but no conclusions whether the systems are stabilized or not can be drawn. Control signal saturation will lead to a slower behavior in general.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

This thesis will address a problem concerning availability of information systems at an enterprise within the financial sector and its external suppliers, so called trusted third party. The information system resides on the internal network of the enterprise and must be available to both employees of the enterprise and the trusted third party simultaneously. This contradicts the company policy which disallows third parties access to the internal network. The HAVECA-model introduced in this thesis provides a framework of methods, each solving a sub problem identified in the model. The identified methods are hardening, verification, control and assurance, together supplying a method for continuously securing the internal network against a trusted third party.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

We have chosen to focus on the meaning of long-term income support dependency regarding health, goal setting and motivation for the recipient of economical aid. We have chosen to use semi structurized interviews to achieve our goal of reaching the clients experience of long-term income support dependency. The study consists of interviews of six clients whose answers have been analyzed through appliance of Kielhofner´s Model of human occupation, Scheff´s Shame in self and society.   Our results show regarding, 1) the factor health that long-term income support dependency may elevate the risk of illness and less experienced options of possibilities to act. 2) regarding the factor goal setting, that goals may be inefficiently used during social work with long-term income support dependent clients and may result in a disorganized relationship between client and social worker in the sense of making the parties pull in opposite direction. 3) regarding the factor motivation, that long-term income support dependency and the living with the emotion of shame elevates the risk of maintaining a negative image of oneself that limits the willpower to assimilate new knowledge and/or skills.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.