PDF-files are to become a native file format in all prepress supplier workflows during 2006. This will give an opportunity to automate and develop a more stream lined prepress workflow. It is desirable to secure digital files by preflight the files early in the process. The objective with this project is therefore to find software that can automate parts of the preflight process and also to build up a well-functioning preflight workflow for preflighting both PDF-files and native files.Meetings have been held with preflight suppliers to find a solution for how to automate parts of the preflight in the prepress workflow. Seven preflight software companies demonstrated the possibilities with their products and four of these were chosen for continuing working with.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

The purpose with this thesis was to form an opinion of how the animal welfare in Sweden is experienced by both farmers and animal inspectors. A great part of this work consists of an inquiry concerning the south and the middle of Sweden. We sent the inquiries to milk and meat producers and to animal inspectors. The response was high, which indicates that this is a subject that affects many people. Our literature study is mostly made on the library bases LIBRIS and LUKAS. The facts we found there were directed towards animal experimentation and furred animal breeding. In order to compare with earlier results we used investigations that had been made by Riksrevisionen 2003. There is a difference in opinions about the new Swedish animal welfare agency that started first of January 2004.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

The aim of this project was to develop educational resources concerning bioenergy and sustainability. The initial purpose was to produce two sets of material: one suitable for children in their first years of Swedish compulsory school, and one designed for upper secondary students. In the report, however, the possibilities are discussed for this material to be used with even wider audiences.In the first phase of the process, literature (books, reports etc.) with relevance to bioenergy, sustainability and theories of learning were studied. This insight, along with the appropriate course curriculums, was used in the development stage to produce learning material for the targeted audiences. The development was followed by tests and evaluations carried out with high school students, upon which an analytical discussion is held regarding the consequences and possibilities that the results of this project pose.The content of the learning material is based on the curriculum and course requirements provided by Skolverket (The Swedish National Agency for Education) for lower elementary and high school students.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

During half a century the society has been changed from an industrial to knowledge-driven society. Industry companies have standardized requirements and companies that works with development in production has unique qualifications. The public employment office was created during a time that each tailored to then general requirements were dominating and the adaptation average appropriate worker and appropriate work where general. When the monopoly was stopped, crew companies begun to settle down on the market that flexibly adapt themselves to carried out now specialized needs that require sophisticated adaptation average work and job seekers. Companies lose the confidence for the public employment office and politicians threaten the organization with big closure.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Ett branschanpassat affärssystem är avsett för organisationer verksamma inom samma bransch. Syftet med denna typ av affärssystem är att ge högre passform än standardiserade affärssystem och vara billigare än skräddarsydda affärssystem. Det råder dock brist på kunskap om hur dessa ska utvecklas. Genom vår litteraturstudie presenteras en kravinsamlingsmodell med utgångspunkt i Requirements Engineering som ska ge stöd för utvecklare vid insamling av krav för branschanpassade affärssystem. Utöver det identifierades ett flertal aktiviteter relaterade till modellen.