Abstract   This degree project comprises 30 credits, i.e. 20 weeks of work. The work mainly deals with the energy balance for a multi-family house in Västerås and the requirements for energy conservation in the Swedish building code, BBR. Calculations of the energy balance are supplemented by a number of interviews. Energy conservation in general has become more important in recent years and the subject is in line with increased public awareness. This importance and attention is explained by environmental problems in general and global warming in particular, but also by rising energy prices.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

In writing this study, I wanted to examine which principles of organization that are possible for Swedish public libraries to use, and what these principles mean for the libraries customerorientation. This is done by examining a number of written sources, as well as studying the organization of six public libraries. I found several possible principles, but a number of principles have been more commonly used than others. Historically most public libraries were organized according to the functions needed to be carried out within the organization, but today it is much more common to use subject-based organizations, with some examples of organizing according to user-groups and needs. I have also encountered the possibility of organizing according to the sources that are to be handled, or the way in which these sources are used by the customers.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

Akademiska Hus owns and manages the university facilities in most university towns in Sweden. Bilbergska house in Örebro was built in 2008 by Akademiska Hus, and designed by White Architects. Today's buildings must meet accessibility requirements determined by Swedish Board of Housing, and it is the developer who must ensure that they are fulfilled. Swedish Board of Housing requirements are often vaguely written and interpretation space is large.This report aims to investigate how much of the requirements which are set towards the University and landlord Akademiska Hus are being achieved. This is done by studying the requirements that are set.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

To automate software testing is an investment, and that makes it important to have good knowledge about automation before an implementation is made. In this master thesis a study about automated testing is carried out. The study also includes a closer look at the testing tool TestComplete. TestComplete is one out of many tools on the market that is developed for automated GUI testing and the goal is to get a picture of how well the tool can adjust to CC Systems own applications. Studies show that it is hard to write lasting test scripts.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

This report is the written part of a bachelorthesis on the computer engineering program atUniversity of Halmstad. The project was a cooperate project that where done together withFree2move Holding AB. Free2move is a company with eight employees in Sweden and four inMalaysia. The company is today developing Bluetooth modules and RFID chips. The market forthis kind of products is growing very rapidly, last year it grew 71 percent.