This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

With Microsoft's new operating system, Windows 8, a new type of applications were introduced, Windows Store Apps. These applications must meet certain requirements in order to be uploaded to Windows own store for apps. There are also guidelines to follow. The requirements and guidelines include appearance and functionality, such as a common search function in the applications to contribute to a more unified experience. How does these requirements and guidelines influence developers? Whether the development of the Windows Store Apps gets more difficult, or perhaps even simpler, is studied and evaluated in this report.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The first law in Sweden containing an act of legal deposit is from 1661. Since then the printing-houses are supposed to deliver all printed material to the Royal Library and other recipient libraries. Today, more and more information is solely published electronically. This material is not yet included in the law of legal deposit. In a similar way as our printed cultural heritage is saved for posterity our electronic cultural heritage has to be saved.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Denna rapport avser att undersöka för- och nackdelar med att utveckla ett för ändamålet specialanpassat system eller utnyttja de standardsystem, som i det aktuella fallet tryckerikoncernen JMS redan äger och använder. Genom en mer noggrann definiering av ickefunktionella krav på bland annat användbarhet har en specialanpassad prototyp framställts. I projektet användes metoder för kravinsamling som ledde till en kravspecifikation och i sin tur slutade med en färdig prototyp. Prototypen jämfördes med två standardsystem genom användartester och intervjuer. Prototypen visade sig leva upp till de krav som upptäcktes.

External forces have significant impact on organisations. This study analyzes the implications of one type of external forces in aid-focused NGOs through two qualitative case studies where it is investigated if Sida?s reporting requirements have the intended effects: learning and control using a theoretical framework where it is recognised that the requirements may also result in dysfunctional behaviour: decoupling and colonisation. The study shows that when the demands are the result of institutional pressure rather than an ambition to generate learning and control, the demands tend to be unrealistic and the NGOs therefore decouple the formal fulfilment of the demands from the actual activities. It is argued that a partnership, which incorporates trust and dialogue, is a prerequisite, not only for learning, but also control.

External forces have significant impact on organisations. This study analyzes the implications of one type of external forces in aid-focused NGOs through two qualitative case studies where it is investigated if Sida?s reporting requirements have the intended effects: learning and control using a theoretical framework where it is recognised that the requirements may also result in dysfunctional behaviour: decoupling and colonisation. The study shows that when the demands are the result of institutional pressure rather than an ambition to generate learning and control, the demands tend to be unrealistic and the NGOs therefore decouple the formal fulfilment of the demands from the actual activities. It is argued that a partnership, which incorporates trust and dialogue, is a prerequisite, not only for learning, but also control.

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.

In a comparing survey this thesis investigatesclassification systems for dams in Sweden, Norway,Finland, Switzerland, Canada and USA. Theinvestigation is aiming at an understanding of howpotential consequences of a dam failure are takeninto account when classifying dams. Furthermore,the significance of the classification, regarding therequirements on the dam owner and surveillanceauthorities concerning dam safety is considered andreviewed. The thesis is pointing out similarities anddifferences in the line of dam safety.The survey of dam safety is firstly based upon legalrequirements in the different countries andsecondly on guidelines regarding dam safety. Damowners generally are ultimately responsible for thesafety of their dam, and often have their ownroutines regarding how this safety is to be achieved.In this thesis, however, the legal requirements aremainly focused upon.The investigation has resulted in an outlining ofeight areas, where the classification systems in thevarious countries have been compared.

The purpose of this paper is to form an understanding of how to use the demand for usability and accessibility. Requirements for usability and accessibility are available from several agencies, an example is Myndigheten för delaktighet. Through literature studies, I get answer to what are usability and accessibility and the demands that can be set on a public website. In this study of three municipalities you get a glance how local authorities have been working on their web pages and if they fulfill the requirements so that the disabled would consider that the page has good usability and accessibility. In the interviews conducted in one of the municipalities you will receive information how they plan, organize, implement, monitor and develop their websites.

Det problemområde som behandlas i arbetet är den del av systemutvecklarens arbete avsett att hantera förändringar i kravbilden under systemutvecklingens hela livscykel, kallat Requirements Management (RM). Arbetet fokuseras på detaljer kring spårbarhet inom förändringshantering.För att lyckas i spårbarhetsarbetet gäller det för systemutvecklaren att se hur de olika krav som finns i kravbilden är relaterade till varandra och var kraven har sitt ursprung. Det skiljs inom spårbarhetsområdet mellan framåt- och bakåtriktad spårbarhet. Vardera spårbarhetsriktningen delas sedan in i två steg från kravursprung framåt via kravdokumentation till realisering då det gäller den framåtriktade och från realisering via kravdokumentation till kravursprung då det gäller den bakåtriktade.En studie har genomförts där litteraturens syn har jämförts med ett antal respondenters då det gäller att dels kartlägga vilka typer av spårbarhet som behövs inom systemutvecklingsprojekt och dels vilket stöd som behövs för att etablera och underhålla denna spårbarhet..