This diploma work handles how some parishes of the Swedish Church administrate their building properties.The report also includes how some external property managers in Sweden work with maintenance plans and other maintenance issues. Further, a number of deficiencies have been identified and suggestions to workarounds are treated. The conclusions drawn in this thesis are based on the author´s experience in the field, performed interviews, and literature studies. The result of the work shows a general lack of knowledge in many parishes what concerns regulatory requirements, properties with no maintenance plan and substandard supervision resulting in unnecessary and expensive repairs. Based on these results, different plans for the maintenance of the building properties of the Swedish Church has been proposed..

This report is the written documentation of a project work carried out at the Division of Engineering Materials at Luleå University of Technology in cooperation with Seco Tools AB. The project deals with the analysis of residual stresses in Ti-Al-N thin film grown on WC/Co cutting inserts. The composition of Al varied from 0% up to 75%. Increasing the Al content in the Ti(1-x)Alx N compound improves the compressive residual stresses even after annealing of the material. The experiments have been performed in a high temperature x-ray diffractometer (HTXRD) where the interplanar atomic spacing was determined in-situ and subsequent converted into stresses.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

This master thesis has three purposes. The first purpose is to give a theoretical background of how to divide up forest estates and to study how the legal system for these matters works. A literature study has been carried out to give the background and a theoretical model has been made for analysing the law cases. The first purpose also partly touched the decision process in dividing up forest estates from point of view of the law of land parcelling (FBL), point of view. The second purpose is to examine effects of a change of production requirements in 3 cap.7 § FBL as regards dividing up forest estates of private forest owners.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

Målet med detta arbete är att bättre förstå hur riktlinjer ska skapas och användas. Utgångspunkten har varit att media uppmärksammat ett flertal incidenter där främmande människor tog oönskad kontakt med olika förskolor i Karlskronaområdet. Författarna ville då se över hur kommunen arbetade med frågor om yttre hot vilket medförde att arbetet utmynnade i ett försök om att bättre försöka få förståelse för riktlinjer och dess användning då kommunen vid arbetets start saknade riktlinjer för yttre hot av denna typ. Metoden som använts är av kvalitativ art i form av intervjuer med några säkerhetsansvariga för förskolor i andra svenska kommuner. Resultatet av dessa intervjuer tillsammans med kompletterande material från generella tillvägagångssätt för identifikation och analys av säkerhetsproblem resulterade i ett förslag på arbetsmetoden vid skapandet av riktlinjer samt en påminnelse om att se över befintliga riktlinjer för yttre hot..

The aim of this qualitative study was to give an deeper understanding of how employees in the engineering industry experienced health education and how they understood and gave meaning to the terms health and health education. The study was based on interviews with eight men and women who participated in a health education project which had been held on their workplace. When the study took place the interviewees were in the age between 28 and 58 years. The results indicate that the employees understood health as a combination of both physical and psychological factors. The positive aspects described by the interviewees based on their experiences from the project were increase physical activities and that the project had helped them to get a better diet.

This thesis was performed at SverigeGrepen AB. SverigeGrepen is a company that hasone product on the market; a manure fork that is designed to be used for mucking inshavings or peat. The aim of this thesis was to develop a new manure fork that isadapted to be used in straw.The development started with a pilot study where experience of mucking wascollected to be able to understand what and why certain characteristics are importantfor the function and use of the manure fork.A basic concept was developed where the main function was fulfilled, which meantthat a separation between dung and straw could be performed in a way that wasbeneficial for the user.The work resulted in four concepts of how a manure fork could be used in the strawthat can be designed and constructed. The conclusion that the work gave was that allconcepts met the main requirements required by a manure fork to use in straw.However, concept four provides a good visual impression, while its benefits areassumed to be important qualities..

Föreliggande rapport är avsedd som ett examensarbete i elektroteknik (20p).Syftet med arbetet är att skapa en applikation för att finna störningar pålågspänningsnätet upp till 95kHz. Bakgrunden till arbetet kommer frånenergibolagen som vill kunna skicka datainformation direkt pålågspänningsnätet, detta vill de kunna göra med hastigheter mellan 2k ? 5kHz. Beroende på med vilken hastighet man vill skicka information kan störningar mellan givna frekvenser hindra datatransmissionen, därför är detviktigt att hitta vid vilka frekvenser störningarna uppstår så att lämpligaåtgärder kan vidtas.Grundläggande delar i applikationen är ett oscilloskop för mätning, dator medGPIB- kort för upptagning av data och LabView programvara för hantering avdata. För frekvensanalys kommer Fast Fourier Transform, FFT, att användas,varvid en grundläggande beskrivning kommer att medfölja..

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

The main objective with this study was to investigate so called odd purposes acceptable when registrating property along with how social development affects these purposes, furthermore to investigate how the cadastral surveyors estimates a foreseeable time. Tradition and praxis is used for several obvious purposes such as housing, farming, forests, offices and industry. Praxis is yet to be defined regarding more unique purposes. There is no mention in the law about which purposes are found acceptable to assure the demands on suitability are met. Cadastral authorities are responsible for making sure the division into property units is uniform and rule of law-accordingly.

Purpose: The purpose of this study is to seek understanding, describe and analyse how auditors practically reassure and maintain their independence towards clients.Methodology: The study is conducted with a qualitative method with a deductive approach. The study is based on interviews with both experienced and recently graduated auditors.Conclusion: Our empirical results show that there are economical incentives that contradict the requirements to fulfil the auditor?s independence. The conclusion is that the media view is narrow and biased. Furthermore the auditors agree that an acceptable level of comfort is achieved by offering a high value, being a part of a large network of professionals and the ability to set materiality and evaluate risks. .

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.