This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

The aim of this study has been to describe the ongoing region enlargement process in the region Mälardalen, located in the east part of Sweden, and to investigate how this process can affect the local level. The study is especially orientated on public communications and accessibility. The intention has also been to examine how the local accessibility can affect the re-gional development in Mälardalen. The local investigation object that has been chosen for this research is the city Strängnäs, situated in the province of Södermanland. The city of Strängnäs and the cities in it?s near geographic surroundings has been the benchmark for this casestudy, in which the local accessibility with public transportation has been investigated.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The goal of customer support is to help clients achieve maximum value in their services and products. Customer support is the public face of a company, which means that it is important to give the customer a positive experience and live up to customer expectations. Efficient customer support has become more important and studies show that customers who leave a company do so because of poor service. Customers' growing demands for higher quality and easier access to services means that companies must recognize the need to satisfy each customer. It is important that each customer receives the attention required and that customer needs are met quickly and flawlessly.

The aim of this study was to try to get an overall image of how participation is constituted in the organization of AMA, a Human Service Organization (HSO) that is part of the Vasteras municipality.  With focus on mainly participation but also communication and leadership the goal was to find out more about how the governing parts of the organization was able to communicate and create participation amongst their employees. Did the message come across? Using a triangulation method including interviews, surveys and observation hopefully this question would be answered along with trying to depict an overall image of the participation within the organization. The results indicated that there were both differences as well as similarities between the employees and the management with regards to how they experienced participation. A surprising result was that the geographical location was found to have an impact on how the staff perceived participation.

ABSTRACTBackground: Most cases of lumbar disc herniation are asymptomatic. When symptomatic, LDH may cause a significant physical and mental distress. Initially, most patients are treated conservative but sometimes operations may be required.Aim: The aim of this study was to provide a review of the scientific basis of physiotherapy, including behavioural therapy, as a treatment to lumbar disc herniation regarding pain, function and the size of disc herniation in people suffering from lumbar disc herniation.Method: Four databases were used in the searches of literature. Assessment of the validity of the studies was done with the PEDro-scale and valuation of evidence rate was made according to guidelines made by the Swedish Council on Health Technology Assessment (SBU).Result: Nine RCT-studies were included with a total of 713 participants. The scientific basis is moderate to support a pain reduction and limited regarding improvement of physical function when it comes to physical exercises, including MDT.

The purpose of this study has been to maintain a deeper understanding of how unestablished, professional musicians can get discovered by the music industry by communication, branding and positioning of their brand at social media.We found that fans have a greater impact on unestablished musicians than we previously thought. They have to create an identity for their brand, keep active on social media and engage their fans. Musical artists must maintain an ongoing dialogue to keep their fanbase, preferably with emotions involved. No fans equals minimum attention from the industry. Uniformity and professionalism is also important, because it evokes seriousness.

Rapportens huvudfokus handlar om ifall det är möjligt att skapa mjuka kroppar med hjälp av många små fasta kroppar. Det kollas även ifall det går att ge ett realistiskt beteende vid kollision med dessa. Biblioteken som har används för att testa detta är Microsoft XNA och fysikmotorn Farseer Physics.Spelet som byggdes är ett 2D plattform spel där spelaren spelar en boll som kan hoppa på vattendroppar och löv som båda är mjuka kroppar. Vattendroppen är uppbyggd av små hårda kroppar medan lövet är en större hård kropp som med hjälp av en Distance Joint kan vrida på sig vid kollision.Det går att göra en mjuk kropp med realistiska kollisioner men fysik motorn som används i detta fallet ger vissa restriktioner..

Bakgrund: Bland det värsta som kan hända företag är att få en going-concern varning eftersom det är en signal till intressenter om att företag inte tros överleva under en längre tidsperiod. Tidigare studier har studerat effekterna av en going-concern varning för företags intressenter och på kortsikt vad som händer med företag. Det gör att vi vill studera hur företag agerar för att undvika konkurs och likvidation och därmed överleva going-concern varning.Syfte: Syftet med studien är att förklara hur företag agerar för att överleva en going-concern varning med fokus på kommunikation. Vi kommer därför att skapa en modell.Metod: Studien har en forskningsansats som är deduktiv där vi tar avstamp från resursberoende teorin, institutionell teori och attribution theory. Den empiriska datan är av kvantitativ art och är insamlad via enkätundersökning samt en dokumentstudie av årsredovisningar.Slutsats: Vi har kommit fram till att en going-concern varning är en kris för företag.

A group of scientist, called the council of democracy in Sweden made a predictionabout members of political parties, in 2013 members should not exist. In this essaythat statement going to be questioned. It shows that most of the political parties losesmembers in Sweden. The only differences from year 2000 and now is that in 14 yearsthe parties has lost 65000 members, between 1991-1999 it was about 220000members. Something has changed.

Rapportens huvudfokus handlar om ifall det är möjligt att skapa mjuka kroppar med hjälp av många små fasta kroppar. Det kollas även ifall det går att ge ett realistiskt beteende vid kollision med dessa. Biblioteken som har används för att testa detta är Microsoft XNA och fysikmotorn Farseer Physics.Spelet som byggdes är ett 2D plattform spel där spelaren spelar en boll som kan hoppa på vattendroppar och löv som båda är mjuka kroppar. Vattendroppen är uppbyggd av små hårda kroppar medan lövet är en större hård kropp som med hjälp av en Distance Joint kan vrida på sig vid kollision.Det går att göra en mjuk kropp med realistiska kollisioner men fysik motorn som används i detta fallet ger vissa restriktioner..

At the workplace, different types of discussions take place, where employers meet members of staff. Some of these discussions take the form of an employer correcting a member of staff; that is the employer wanting the member of staff to change his/her behaviour. The correcting discussion has a very important role within labour legislation as it is often this measure that the employer takes to bring about change. If this does not happen then more severe disciplinary measures like a warning or giving notice will be necessary. This paper is about the employer's role in the corrective discussion. How an employer can work with the corrective discussion but also what effects can be experienced due to the discussion. To understand how an employer experiences the corrective discussion, 98 employers within a municipality have received a web questionnaire via the computer program Esmaker. Of these employers 68 answered the questions, which is a response of barely 70%.

Although textbooks are scientifically proven that they are important and central to the school curriculum one should think critically about the content in textbooks - is it really compatible with the curriculum of following the textbook tradition? As a teacher there are different ways to reflect on which textbook to choose. It is important to compare several textbooks with each other and be aware that a textbook should follow the curriculum. A teacher examines many sections/topics in the textbooks, but in this paper only one section will be reviewed among four different textbooks. The section to be compared, in the paper, is the interwar period.

From a new perspective, this paper will examine the artillery and the pike role in the period 1700-1712 and the battalion´s battle formation in the Caroline combat tactics. Carolinian battle tactics were practiced during the period 1700-1721. The results from my study will be compared to existing research opinion regarding the selected subject areas, if the result confirms the thesis or question the existing research opinion. The source material used consists of eyewitness accounts from the period consisting of diaries, memoir, biography, general muster rolls and historical literature covering the subject. The analysis shows that the Caroline artillery took part in 12 battles during the period of 1700-1712.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.