The purpose of this risk analysis is to investigate if the transport of dangerous gods through Halmstad is a threat to the surrounding area. The Report shall serve as a component in the making of pre-plans and the planning of exercises..

This exam work has been done for an external client, Snickars Records a record shop specialized in vinyl records with a niches in dance music. The shop is located at Heleneborgsgatan 5A södermalm, Stockholm. The client was in a big need for a new webshop due to the old one was missing a lot of functionality. The project resulted in an almost complete product that?s ready to be implemented and was built after the specifications that was set together with our client.

This Report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this Report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, Reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this Report is to formulate guidelines for planning city centers from a traffic safety perspective.

Abstract (in English)During the last fifty years, the waste in an average Swedish household has increased by about five hundred percent. In order to manage (eller take care of) all of this new waste, Swedes need a method of facilitating the handling process. In this Report, both the habits and needs among private households across Sweden are investigated, followed by a pertinent solution to the waste problem. This solution is a container with two compartments, using the standarddimensions of a grocery store paper bag..

The purpose of our essay is to investigate the trust in accountants. The method we used to investigate the trust was a survey and a questionnaire was used to collect the data. The data was gathered from three different groups, shareholders, lenders and tax authority. When we analysed the data we found out that the groups trust in accountants were neither strong nor weak. The results can be generalized on all the three groups because the observations were scattered around the means and we used random selection to collect the data.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The Report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The Report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this Report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The Report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this Report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This Report is our Master thesis. Our work has taken place at a one-stop-shop in Sölvesborg during the spring of 2002. We have conducted ethnographical studies concerning the one-stop-shops frontdesk and telephone exchange. During these studies we became aware of some differences under which the daily work was to be carried out. When operating the switchboard the staff usually work alone and perform the tasks individually.

The Falun area has been undergoing mining activity for a very long time and miningslag piled up and was used as foundations for building houses and roads, Ingarvetstarted expanding in the 1970s to an industrial area. The main goal for this Report is toreconstruct a soil map of how the landscape was before anthropogenic effects. With thehelp of ArcGIS and geotechnical Reports a soil map for parts of Ingarvet, Falun werecreated..

Due to a rising debate concerning corporate governance that has caused increasing demands for companies? transparency, several codes of conduct have been introduced. The Swedish Code for Corporate Governance is obliged to companies with a turnover exceeding three billions. There are companies that voluntarily apply the Swedish Code. Possible causes to this phenomenon ought to be that the code for corporate governance conveys legitimacy through the insight into the affairs of a company the public receives, through the Report of the corporate governance that is published in the annual Report and on the home page of the company.

This Report describes the process of translating Russian financial information in accordance with Russian Accounting Standards to IFRS, International Financial Reporting Standards. The author describes the two regulatory frameworks and reveals a number of risk factors in the process. These risk factors may affect the reliability of figures from Russian companies. The conclusion states some recommendations on how these risk factors can be managed..

The capacity to extract information from vehicles has the potential to be very beneficial. Performing analysis on information about fuel usage, emission values and other driving properties of a vehicle can lead to great economic and environmental benefits.This Report contains descriptions of two prominent systems for retrieving information of this nature from a vehicle, On-Board Diagnostics and FMS-Standard, and of an implementation of FMS-Standard.The conclusion drawn after this investigation is that these systems do indeed offer access to the benefits mentioned earlier, although to varying degrees and with differing prioritisation..

The essay that you are now holding in your hand is a survey about how different companies calculate their logistic costs and the activities which are included. We have examined five companies within the county of Kalmar. The research objective has been to study how aware companies are about their logistic activities and costs. The conclusion of the Report is that they put their logistic costs together with other costs which they distribute among their products. The companies identify additional logistic activities than costs which regarding to us is one step in the right direction towards the awareness concerning future effectiveness in the business..