This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Arbetets ansats är öka förståelsen för vad svenska ungdomar möter när de råkat ut för en allvarlig händelse och söker professionell hjälp. Arbetet berör juridisk bakgrund, det sociala arbetets organisation och närvarande faktorer i mötet mellan socialarbetare och klient. Vidare berörs hur individen påverkas av att möta socialarbetare utifrån symbolisk interaktionism och stämplingsteorin. Genom en enkätundersökning undersöks hur stor svenska ungdomars kännedom om tystnadsplikt och anmälningsplikt är och om det finns könsskillnader i denna medvetenhet. Enkätundersökningen utgår framförallt ifrån svensk stad med cirka 30.000 invånare i kommunen.

The purpose of this report is to create and develop a model that streamlines and helps the innovationprocess of an idea owner and also in the development of ideas.This model should be able to apply for workshops and in innovation advice or business devlopment. I used the qualitative method in my essay just to get a maximum clear data collection, where the seven respondents were included in the interviews. However, much of the information retrieved from the theory books and research/science articles, in order to answer the research/Sceince question in the best possible way.

During spring 2001 we have been involved with our bachelor thesis at Doberman Digital Agency, an Internet related webdesign company. We have focused our work on the registration process via digital medias such as the Internet. During our workprocess we have been conducting a number of studies and analyses of workrelated materials. Ethnographical methods such as structured interviews and participant observations were primarily used in our work. We also widely used brainstorming in our designprocess.

This report is our Master thesis. Our work has taken place at a one-stop-shop in Sölvesborg during the spring of 2002. We have conducted ethnographical studies concerning the one-stop-shops frontdesk and telephone exchange. During these studies we became aware of some differences under which the daily work was to be carried out. When operating the switchboard the staff usually work alone and perform the tasks individually.

The housing sector of today represents for almost 40% of the energy consumption, an energy consumption of which the major part consists of non-renewable energy sources. This is not sustainable and utilization of new energy-efficient technologies in buildings can be a step in the right direction, towards a sustainable energy society.This report has been made on behalf of and in cooperation with Älvstranden Utveckling AB in Gothenburg to examine how future energy-efficient technologies can affect the energy demand in energy-efficient multi-dwelling buildings.The report is based on Älvstrandens passive house, Hamnhuset, a house whose energy consumption is far below the BBR's requirements. The report looks at the opportunities for improvement within windows, insulation, solar energy technologies, as well as white goods. Computer simulations are then made to apply the selected technologies into a reference building. Technologies are selected from an energy efficient perspective and no account has been taken of other aspects such as the economy.

This report describes the construction process and the aspects that should be taken into consideration. It includes models of decision and how these can be used in practice. Planning of a building project is very important for a successful execution. This will be the foundation of problems that will occur during the production. In the planning process people with different positions, search for the best suitable building methods.

Kandidatuppsatsen skrevs på Göteborgs Hamn, Skandinaviens största hamn. Uppsatsen skrevs isyfte att observera möjligheter med vilka trådlösa kommunikationsmedel produktionsledarna kananvända när de tidsrapporterar. Genom intervjuer och egna observationer visade analysen atthandhållna enheter för tidsrapportering är möjlig i mån om anpassning av handhållen enhet tillverksamhet och målsystemet. Teorin lyfter fram olika möjligheter och komponenter för vadanalysen skall tillämpa villkor, användningsområde, teknologi, objekt och funktioner kommerligger till grund för hur man skall tänka då man implementerar och designar ett nytt eller ettbefintligt målsystem. Resultatet visar att en handhållen enhet är möjlig då man även måste se överett system som passar ihop med målsystem och handhållen enhet samt uppnå de viktiga faktorernasom respondenterna önskar vid övergång från Excel ark till PDA.The thesis was written in Gothenburg Harbor, the biggest harbor in Scandinavia, and was created toobserve what the opportunities are for a change in the ways of communications for the productionmanagement and if there are opportunities for a wireless communication for time report throughhandhelds.

The purpose of this report was to obtain an overview of rabbit meat production in the world, in terms of breeding and feeding. It examines how different feed components contribute to the health of the rabbit as well as the quality of the carcass, and the breeding strategies that are most common in the major producing countries. The production of rabbit meat in Sweden is at present not very large, but it is gaining ground, and that is why this paper mainly deals with the rabbit production abroad. This report also examines the disease Rabbit Viral Haermorrhagic Disease (RVHD) in Sweden, where this disease can cause big problems. The rabbit (Oryctolagus cuniculus) is very special, both in its reproduction and digestion. There is no specific mating season and the digestive tract is designed to digest forage efficiently.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

The aim of this thesis is to contribute to the field ofinformation politics, in the areas of the future regulationof The Fundamental Law on Freedom of Expression andThe Freedom of the Press Act. The focus of the study is todiscursively examine how ideas and perspectives ontechnological developments are expressed in a pendingSwedish legislative proposal. The empirical data consistsof an interim government report, SOU 2010:68, writtenby Yttrandefrihetskommittén (Committee on Freedom ofExpression) and analysed using Norman Fairclough'sCritical Discourse Analysis. The analysis is conducted onthree levels: a textual level, a discursive practice level anda social practice level.On the textual level we found that the committeecontinously uses significantly charged expressions todescribe technological development. On the discursivepractice level two discourses were identified.