Sökresultat:
1790 Uppsatser om Replacement cost - Sida 45 av 120
EKG-Screening för unga idrottare på elitnivå : En systematisk litteraturstudie
ECG-Screening for young elite athletesAbstractBackgroundSudden cardiac death (SCD) during physical activity is a frightening and emotional tragedy that draws huge media attentions when it occurs. Fortunately it is a relatively uncommon occurrence but happens nonetheless to young athletes who often seems to be in perfect health. SCD is used as a term for sudden unexpected complications on the cardiovascular system that leads to a deadly outcome normally within the first hour of onset of symptoms and the cause is some sort of underlying cardiovascular disease that gets triggered by physical activity.Normally athletes gets divided into two groups dependent on age, over and under 35 years, and this studies focus is on the younger group since it is often during this period athletes are at the elite level. It is also in this category the most unexpected sudden deaths occur that is not due to coronary atherosclerosis, which is the dominant cause of death, and drastically increases, for people over 35 years old.AimThe aim of this study was to scientific and unbiased analyze peer-reviewed clinical articles todescribe the pros, cons and cost to implement an ECG-screening as a standard before physicalactivities for specifically defined elite athletes.MethodA systematic review was performed and after all data collection 21 articles was chosen to beused as a base for both background and analyze. At the end 10 articles was fulfilling the criteria to be used at the analyze and later the results.ResultsThe implementation of ECG-screening has reduced SCD in Italy by 89 % between the years 1979-2004.
Competition for forest fuels in Sweden : exploring the possibilities of modeling forest fuel markets in a regional partial equilibrium framework
This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).
?r omfattande varum?rkesr?ttigheter nyckeln till innovation? En utredning av risker vid individanpassning av kl?der p? den europeiska marknaden
This thesis examines the legal boundaries of third-party use of trademarks in the European customized clothing market. The purpose is to determine under what circumstances third parties may legally modify and sell trademarked apparel without infringing on trademark rights. The study employs a legal dogmatic method, analyzing EU trademark law, case law, and legal doctrine to clarify the scope of exclusive rights and their limitations. By analyzing key EU case law, the study further illustrates how the legal framework has been interpreted and applied in cases concerning third-party trademark use.
Given the increasing demand for customized fashion and the rise of new business models in the clothing industry, this topic holds significant legal and economic relevance.
Additionally, Schumpeter?s theory of creative destruction provides a theoretical perspective on how trademark restrictions impact innovation and market competition.
Motivation för fysisk aktivitet : En studie om fysiskt aktiva unga vuxnas motivationsfaktorer till träning
I dagens globaliserade samhälle blir det allt vanligare att barn växer upp med fler än ettspråk i sin omgivning. Det kräver en ökad kunskap om flerspråkighet och vad somsärskiljer flerspråkiga barn från enspråkiga barn. Då de mätinstrument som idaganvänds i Sverige för att utröna om ett barn har en språkstörning endast är utformade förenspråkiga barn riskerar flerspråkiga barn att över- eller underdiagnostiseras. För attråda bot på den problematik som uppkommit i samband med diagnostisering avflerspråkiga barn och språkstörning har ett europeiskt forskningsnätverk bildats, kallatCOST Action IS0804. Syftet med nätverket är att kartlägga SLI (specific languageimpairment) hos flerspråkiga barn genom att koordinera forskning inom lingvistisk ochkognitiv förmåga över ett stort antal länder.
BI M i förvaltningsskedet med avseende på konstruktion.
Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.
Intelligent remuneration in the knowledge economy
Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..
Downsizing : Hur överlevare av uppsägningar påverkas av upplevelsen
In today?s business environment, cost-cutting practices such as downsizing and layoffs remains a widespread phenomenon. Although, the understanding of the effects that these practices has on the remaining individuals, defined as the survivors, is poor. The focus in this paper is therefore to examine how survivors of layoffs can be affected on an individual level, and by what causes.The study was conducted using open-ended, qualitative interviews with three individuals with different experiences of layoffs. The empirical data was analyzed by extracting quotations from the interviews.The study found that layoffs affected the morale and attitude towards management of the individual, and that perceived justice and uncertainty are two causes of negative effects from layoffs..
Luft/luftvärmepump : - Med möjlighet till återvinning
Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.
Kommunikation, uppföljning och tidsplanering inom detaljprojekteringen : Hur projekteringsprocessen kan effektiviseras med små medel
Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.
Hur hanterar institutioner en miljö med blandade Operativsystem?
The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..
Inställningen till?Din journal på nätet? hosallmänläkare iUppsala läns landsting
ECG-Screening for young elite athletesAbstractBackgroundSudden cardiac death (SCD) during physical activity is a frightening and emotional tragedy that draws huge media attentions when it occurs. Fortunately it is a relatively uncommon occurrence but happens nonetheless to young athletes who often seems to be in perfect health. SCD is used as a term for sudden unexpected complications on the cardiovascular system that leads to a deadly outcome normally within the first hour of onset of symptoms and the cause is some sort of underlying cardiovascular disease that gets triggered by physical activity.Normally athletes gets divided into two groups dependent on age, over and under 35 years, and this studies focus is on the younger group since it is often during this period athletes are at the elite level. It is also in this category the most unexpected sudden deaths occur that is not due to coronary atherosclerosis, which is the dominant cause of death, and drastically increases, for people over 35 years old.AimThe aim of this study was to scientific and unbiased analyze peer-reviewed clinical articles todescribe the pros, cons and cost to implement an ECG-screening as a standard before physicalactivities for specifically defined elite athletes.MethodA systematic review was performed and after all data collection 21 articles was chosen to beused as a base for both background and analyze. At the end 10 articles was fulfilling the criteria to be used at the analyze and later the results.ResultsThe implementation of ECG-screening has reduced SCD in Italy by 89 % between the years 1979-2004.
Evaluation of preanalytic methods in order to shorten the processing time before identification of fungal microorganisms by the MALDI-TOF MS
Identification of fungi is based on macroscopic observations of morphology and microscopic characteristics. These conventional methods are time-consuming and requires expert knowledge. For the past years Matrix-assisted laser desorption ionization-time of flight mass spectrometry has been used for routine bacterial identification in clinical laboratories but not yet in the same extension for fungi. In this study three preanalytic preparation methods for fungi were evaluated in order to shorten the processing time in routine laboratory performance.Clinically relevant strains (n=18) of molds and dermatophytes were cultivated on agar plates and prepared according to the different preparation methods for protein extraction. Each strain was analyzed in quadruplicate by the MALDI Biotyper and the database Filamentous Fungi Library 1.0.The results showed that the genus and species identification rates of the least time-consuming direct extraction method were 33% and 11% respectively.
?Utredning av fosfatets inverkan vid pressning av rullar i LRQ MEDIUM BEARINGS
Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.
Arenabygget, ris eller ros? : en hedonisk prisstudie av kommuninvånarnas värdering av den nya arenan.
This study is an examination of the stadium fever prevailing in Sweden. It is built stadiums in Sweden as never before. The high cost of these constructions end up in the end at the Swedish taxpayers. The study examines through the hedonic pricing of real estate how local residents value the new stadiums. The result indicates that local residents put a positive value in the costly and sumptuous buildings.
Produktionseffektivisering av arbetsmoment inom byggsektorn En tidsstudie för standardisering av arbetssätt
Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.