This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

Finnhamn is a group of islands that are located in the middle north part of Stockholm?s archipelagos. On the main island Stora Jolpan there is a camp called Sommargården, which consists of eleven different buildings in various sizes. The assignment given by the Archipelago foundation (Skärgårdsstiftelsen) is to analyze if it?s benefited to replace Sommargårdens current heating system that consists of electricity radiators, with a more energy efficient heating system. This research is done with help of the literature review and a visit to Finnhamn in order to map Sommargården?s current state and its energy usage.

We are heading towards a huge switch of how energy is produced with fossil fuels being replaced by renewable energy sources. It is not difficult to replace the energy you use in the house and there is no need for futuristic technology. There are already many established products on the market such as high efficiency vacuum solar collectors, heat pumps & small wind power stations that can supply the energy being used in a house. The company Sol & Energiteknik SE AB in Huskvarna has many different products which can reduce the need for an outside energy distributor. An average house in Sweden uses 15 000 kWh for heating, 5000 kWh for tap water and 5000 kWh for electricity.

Few would disagree that the media landscape has undergone significant changes the last decade. From bulky computers and plain mobile phones to portable High-Definition computers and multi-functional smartphones. Other media, such as newspapers and music, have evolved and prospered in a digitalized environment. The constant urge to digitalize aspects and functions of our daily lives seems almost instinctive. Television has taken further steps into this environment as it is now accepted and featured via the Internet.

The 1990s were one of the most profitable periods for European airline companies, mainly because of development of world economy and increasing globalisation trends. However, towards the end of the decade, a global economic downturn, high oil prices and new forms of competition turned the industry towards troubled times. The European air-travel industry had to face and accept the new airline business concept, called low-cost or no-frill airlines. In these conditions, traditional airlines had to rethink their strategies and question the old business model. As a response to the competition, European traditional full-service airlines formed alliances or networks to expand the route network and to increase efficiency.

In a business environment where the stakeholder perspective is evolving and sustainable development is receiving increased attention, it is of importance for companies to adjust. The demand and pressure is exerted from several stakeholders who force companies to take action and live up to the expectations because if failing to do so, negative consequences will most likely be the case. The attention of this study is on ABB Power Products (ABB PP) and their environment and working environment risk management. The aim of this thesis is to identify and describe how perceived environmental risks are managed and what the incentives are to work proactively to minimize the risks. The incentives for a proactive risk management strategy are researched through both a strategic and operational perspective.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

The purpose of this paper is to clarify and understand the difference between Brunius?, Zettervall's and Graebe's valueing of a historical building, the cathedral of Lund. Between 1833 and 1963 the cathedral of Lund went through three larger restorations. The character of the restorations however differs a lot between the three church architects, Brunius, Zettervall and Graebe. In a time of low interest for the Middle Ages and of many demolitions of churches in the countryside, Brunius stood out as a researcher and an enthusiast of that special time.

To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

Syfte: Syftet var att beskriva hur sjukvårdspersonal kan hjälpa vuxna patienter att sluta röka, en kortare eller längre tid, inför en elektiv operation.Metod: Studien genomfördes som en litteraturöversikt. Genom sökning i databaserna Pubmed och Cinahl erhölls 10 vetenskapliga artiklar. Sökningar genomfördes med både MeSH-termer och fritextsökning. Artiklarna kvalitetsgranskades, analyserades och samanställdes. Resultat: Metoder som kan användas för att hjälpa patienter att sluta röka är olika former av rådgivning och utbildning: hälsoutbildning, program för livsstilsförändringar, sluta-röka-linje.

The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

Accounting for financial instruments can either be based on a transactions approach or an eco-nomic approach. Under a transactions approach instruments are reported at cost whereas under an economic approach instruments are reported at fair value. Hence, under a transactions approach realization becomes a criterion for recognizing fair value fluctuations as revenue whereas under an economic approach it does not. A mixed model is defined as a combination of the transactions approach and the economic approach insofar it records some accounting items at cost and other items at fair value. The mixed model gives rise to an issue commonly referred to as an accounting mismatch.