Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

Summary The size of the Swedish dairy farms increases and also the demands for rational manage-ment of the herd without affecting the animal welfare enhance. One way to handle the manure in the cow shed alleys is to have automatic scrapers. In this system the scraper has to get rid of the manure somewhere. The most common way of doing that today is to let the scraper deliver the manure under some kind of gate or covering over the manure culvert. When the scraper goes under the gate or the covering there is a risk of squeezing animals and farmer.

Safe operation of a large synchronous power system as Nordel is not an easy task.There are several aspects to take into consideration. This thesis focuses on the problems due to voltage collapses in a transmission system.The ability to foresee an upcoming collapse is vital to maintain stable operation of the grid. The grid operator at Svenska Kraftnät (SvK) uses the computer program SPICA to predict the maximum transfer limit at specified transfer sections. SPICA uses actual states from the grid to predict the transfer limitation, and a quarter later a renewed estimate is produced and so on. This means that the operator can se his transfer limits vary every fifteen minutes.Our task in this project is to validate the accuracy of the limitations obtained by SPICA.

The Stradella system on an accordeon is a complicated construction. It has readymade con-nected chords, these are major, minor, seventh and diminished seventh. To reach other vari-ants of chords you have to combine chord/bass buttons. Which advantages and disadvantages do the use of combined chords/bass buttons mean? How is the pedagogic work affected by using the combined chords/bass buttons? I have interviewed four musicians/teachers to learn about this technique.

The aim of this study is to evaluate an alternative projection of the Medial Coronoid Process (MCP) of the canine elbow joint. The projection (Di35M-PrLO) was, to my knowledge, first mentioned in an article by Haudiquet et al in 2002. In that article the projection was tested in vitro, and a good sensitivity was showed for the Medial Coronoid Process. The projection might be helpful in cases of suspected Fragmented Coronoid Process (FCP) . This study is divided into three parts. The first part is an in-vivo test of the projection, including technique and subjective evaluation of the outlining of the MCP.

The aim of the study was to investigate if methane emission in a constructed wetland changed in a diurnal pattern correlating to temperature, humidity or light conditions. The gas measurements were carried out with a static chamber technique. The wetland (in Nykvarn outside of Linköping, Sweden) takes care of wastewater to reduce the nitrogen loads. Measurements were carried out at three different occasions in the summer of 1998 on two sites in the wetland. One site was close to the inflow, inhabited by Lemnaceae, and another site was located further downstream inhabited by the emergent macrophyte Typha latifolia.

We are heading towards a huge switch of how energy is produced with fossil fuels being replaced by renewable energy sources. It is not difficult to replace the energy you use in the house and there is no need for futuristic technology. There are already many established products on the market such as high efficiency vacuum solar collectors, heat pumps & small wind power stations that can supply the energy being used in a house. The company Sol & Energiteknik SE AB in Huskvarna has many different products which can reduce the need for an outside energy distributor. An average house in Sweden uses 15 000 kWh for heating, 5000 kWh for tap water and 5000 kWh for electricity.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

AbstractThe purpose of this bachelor thesis is to describe the use of artificial insemination (AI) in sheep and discuss the possibilities for AI in Sweden. Male and female fertility, heat detection, semen handling and insemination techniques in sheep are described. Advantages and disadvantages of AI are discussed. In order to achieve genetic progress it is important with well planned and implemented breeding programs. The Swedish Sheep Recording Scheme and computer software from Elitlamm are the basis for sheep breeding in Sweden.

Renewable energy and the charging of electrical vehicles will increase in the future. Therefore the risk of outages is also increasing, partly because renewable energy is intermittent and the production amount can change fast. Charging electrical vehicles is often demanding high effect in short time, which could make faults occur. It takes more advanced technology to short the outage time. Today Övik Energi has high reliability in the power grid, but in order to maintain the reliability, it is time to prevent problems that can occur in the future. This thesis has presented a suggestion for the placement of fault detectors Protrol IPS2, in which a total of four detectors is proposed.

One important issue faced by companies is to secure their information and resources from intrusions. For accessing a resource almost every system uses the approach of assigning a unique username and a password to all legitimate users. This approach has a major drawback. If an intruder gets the above information then he can become a big threat for the company and its resources. To strengthen the computer security there are several biometric methods for identity verification which are based on the human body?s unique characteristics and behavior including fingerprints, face recognition, retina scan and signatures.

Over the last decades, language in the public sector has changed due to influence from New public management. In this thesis, I seek to investigate librarians? attitudes towards a more businesslike way of speaking about libraries, referred to here as management-speak. For this purpose, I?ve used a modified version of the matched guise technique.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

Detta examensarbete behandlar de svenska mindre företagens val mellan K2- och K3-regelverken utifrån ett branschperspektiv. De nya k-regelverken uppkom i samband med att bokföringsnämnden ändrade redovisningsnormgivningen för att bättre passa de internationella normerna. Då k-regelverken blev obligatoriska för räkenskapsår efter den 31 december 2013, har detta inneburit att samtliga mindre företag varit tvungen att ta ställning till vilket av redovisningsregelverken de ska tillämpa under år 2014. Då det föreligger betydande redovisningsmässiga skillnader mellan K2- och K3-regelverken har valet för många företag karaktäriserats av osäkerhet och risk. Företags förmåga att hantera risker och möjligheter som uppstår i samband med osäkerhet utgör en viktig del av företagens strategiska riskhantering då det ämnar till att säkra organisationens framtid.Examensarbetet syftar till att utifrån ett branschperspektiv öka förståelsen kring de mindre företagens sätt att hantera BFN:s normgivningsomvandling och de risker som varit förenat med strategiska beslut och förändringar.