The aim of this Master?s thesis is to study the information needs of the homeless. The main focus is to investigate what kind of information needs that are to be found among the homeless and also how information is exchanged and shared by the group. Another aspect of our study includes the sources that are used to fulfil these information needs. The homeless use of the library, as one of these sources, is also examined.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

The aim of this thesis was twofold, on the one hand to compile a set of usability and accessibility guidelines in order to establish the characteristics of a user friendly website, and on the other to test these guidelines on eight library webcourses with user education to see how well they adhered to the guidelines. The methods used were literature survey and source studies. The guidelines found in the literature survey were divided into four different categories: document properties, structure and navigability, visual characteristics and accessibility. In order to establish the adequacy of the guidelines, I examined reference sources, mostly on the web. To a certain extent this examination has been based on HCI Human-Computer interaction theories.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

South Africa has been among the top ten wine producing countries for at least 20 years. Even though the land under grapevines is decreasing globally it is still increasing in Africa. The awareness of environment has strengthen the last years and South African producers experience a high demand of environmentally friendly produced wine, especially from the European market. This demand was the driving force behind the development of the world unique sustainability certification, Integrated Production of Wine (IPW), which is inscribed in the South African legislation. What makes this certification unique is that consumers can trace their product all the way back to the farming practices owing to the identity number specified on the IPW Integrity & Sustainability seal on certified products.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

Skärgårdsstiftelsen, which is responsible for several of the archipelago islands in Stockholm, has chosen to explore the possibilities for more sustainable heating systems in buildings on the islands in collaboration with KTH. A reduction of energy use and improving the efficiency of existing heating systems are included as part of the environmental work. This report studies the island of Grinda, which is located outside the area of Vaxholm in Stockholm. The study area consists of a guesthouse consisting of a restaurant as well as conference facilities and four neighboring cottages used for overnighting. The cottages now run solely on direct electricity, both for heating and hot water.

The consumption and energy use in today's society contributes to the on-going climate change that creates a debt of life quality for future generations (www, DN, 2007, a). The resources that are used by humans exceed by far what is sustainable (www, Regeringen, 2007, a). The purpose of this paper is to examine how a message about energy conservation should be designed to reach youths. This will be attempted by showing their thoughts on energy and environmental issues and also what it would take for them to get more involved in these issues. The views of the youths are gained by a number of focus group-interviews, which where carried out in the fall of 2007, with kids in the ages 12 to 19. Apart from these interviews, interviews where also conducted with representatives from different youth organisations in Sweden, which gave their views on how to get a message across to kids.

I detta examensarbete studeras kommande energikrav för byggnader i Sverige och i synnerhet kraven påspecifik energianvändning. Detta mot bakgrund av EU-kommissionens och EU-parlamentets direktiv,EPBD2, om nära nollenergibyggnader 2020. Därefter bearbetas ett förslag på en nyytterväggskonstruktion som med lägre U-värde än den befintliga ytterväggen ska sänkaFiskarhedenvillans olika hustypers specifika energianvändning. Syftet med sänkningen är att möjliggöraför Fiskarhedenvillan att uppfylla de kommande energikraven.Det är många parametrar som måste uppfyllas och det nya ytterväggsförslaget analyseras förutom urenergisynpunkt även med hänsyn till statik, fukt och kostnad. Beräkningar för statik och specifikenergianvändning har gjorts för ett referenshus.Resultatet av att byta ut den befintliga ytterväggskonstruktionen mot det framarbetade förslaget medca 33 % lägre U-värde gav endast en sänkning med ca 6 % av den specifika energianvändningen.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

During the last decades the housing sector has increased continuously, and housings and services accounted for 40 % of the energy usage in Sweden during 2011. The expansion in number of buildings in society has resulted in an increase in both energy usage and emissions of greenhouse gases. It is crucial to enable a sustainable development of society and as a result, the demand to reduce the emissions of carbon dioxide is a current question. In this study, the carbon dioxide emitted from the housing sector in Stockholm is estimated. The housing sector can be divided into different types of houses such as apartment blocks, single-family houses and holiday houses. By collecting information of the energy purchased in respective households, a computational model is generated that calculates the total emission of carbon dioxide.