This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Vid tillfällen då det inte lämpar sig att stå vid en videokamera kan det lösas med ett fjärrstyrt kamerafäste. Exempel på tillfällen är på grund av platsbrist på en konsert, en högtidsceremoni där någon måste stå konstigt till för att få bra bild, ute i naturen där djur ska filmas utan att bli ivägskrämda eller vid personalbrist, en tight budget och måste styra flera kameror samtidigt. De system som finns tillgängliga på amatörmarknaden idag har antingen annan funktionalitet och passar sig inte för ovanstående problem eller har väldigt begränsad räckvidd och går inte att sammankoppla med en mobilapplikation.Detta projekt går ut på att ta fram en kostnadseffektiv och skräddarsydd lösning för ovanstående problem genom att utveckla ett fjärrstyrt kamerafäste i semiproffssegmentet där det via en handkontroll och vid senare skede med en mobilapplikation styr kamerans lutning och rotation även kallad tiltning och panorering.Skillnaderna mellan denna och befintliga lösningar är att med hjälp av Bluetooth-tekniken kan styra både med handkontroll och senare även med en mobilapplikation, anledningen till att det skall kunna styra med båda är att det inte alltid är tillåtet att använda sig av mobiltelefoner i alla miljöer där man vill filma och därför får ett bredare användningsområde för kamerafästet..

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.

Saab har utvecklat en produkt, Remote Tower, vars syfte är att fjärrstyra en flygplats. Fjärrstyrning innebär övervakning och styrning av flygplatsen från en annan plats än flygledningstornet. På den flygplats som ska övervakas har kameror monterats på ett sätt så att en 360-graders vy ges och bilden från dessa skickas till den plats varifrån man styr flygplatsen. När en ominstallation av en eller flera kameror görs så behövs det i dagsläget två installatörer. Dessa kan behöva arbeta på olika orter då serverdatorn inte behöver vara placerad i närheten av flygplatsen i sig.

This study presents results for observing forest changes in Sweden using multi-temporal L-band satellite data and is a part of the JAXA?s ALOS Kyoto and Carbon Initiative. An extensive dataset of images acquired by the Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar (ALOS PALSAR) is investigated for clear-cut detection in boreal forests in northern Sweden (Lat. 64°14? N, Long.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

In our attempts to understand the world, wildlife films play a significant role. Wildlife films help us to see new places and learn about animals in remote locations, that we otherwise wouldn?t be able to do. Yet wildlife films have throughout history been criticized, mainly for the ambivalent relationship between science and storytelling. While the films give us a scientific impression and say something about the ?reality?, they clearly have the intension to amuse, capture and entertain their audience.

When nursing human patients during hospitalization, the nurse is the one responsible. The nursing is controlled by different models of nursing and careplans, shaped by every patient?s individual needs. This is to guarantee the quality of the care. The veterinary nurse is not ultimately responsible for patient care.

According to the EEG-councils regulation nr 2092/91, all seed used in organic production must have organic origin. All seed which is offered for sale must be controlled by KRAV, and also comply with the rules of the seedlegislation. The seedlegislation contains demands respecting origin, quality, growingconditions and freedom from deseases. In this piece of work I will investigate the profitability of organic potatoseedproduction, and also what it takes to produce potatoseed. The workmethod has been to, with help from counsellors and growers, make some compareable calculations for foodpotatoes and seedpotatoes, and also with help from a literaturestudy investigate which requires an organic seedcultivation must fulfil. In this piece of work I found out that the organic potatoseedproduction still is to insecure to be profitable. The attack of potatoleafmould, which is out of control, cause unequal yields and this will bring that the new EU-rules, concerning organic seed, not seems defendable yet..

The initial aim of the roll out of smart electricity meters in Sweden was to allow remote readings of the households? monthly electricity consumption for billing purposes. Since then the transition towards a smart grid has become a more prioritized matter. In the roll out of next generation smart meters more attention is therefore given to how the Distribution System Operator (DSO) can benefit from the meter through different smart grid applications. This study uses a qualitative research method to identify three general fields of application and 15 specific concepts corresponding to ways in which the DSO can create added value from the information provided by the smart meter.

The interest for power and energy measurement has greatly raised with todays increasing electricity prices and enviromental awareness. In the search for energy efficient solutions, the measurements are more complex due to increasing of non linear components. Harmonics and non sinusoidal voltages put high demands on sampling and filtering. Meanwhile, the price must be controlled so the customer still will find it interesting to invest in smaller plants. ITT W&WW asks for a robust, heat resistant power meter with compact dimensions to allow mounting inside the casing of a pump.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Det finns idag inget enkelt sätt att dela mappar och filer mellan datorer över Internet utan att behöva spara dessa på flera ställen. Detta är ett problem då man ibland inte vill ha all sin information spridd över flera källor eller inte har nog med utrymme för att spara samma data på flera ställen.Problemet i fråga blir att koppla ihop datorer över Internet. Då datorer kan flyttas runt mellan olika nätverk och därför ha olika IP-adresser krävs en lösning som håller reda på detta. En användbar lösning ska inte kräva att användarna ska veta om denna information. Eftersom projektet är över Internet så krävs det att det är väldefinierat hur kommunikation utförs.Projektet delades in i tre komponenter, en klient, en server och en master-server, som kunde utvecklas sida vid sida av varandra då den enda interaktionen mellan modulerna är nätverkskommunikationen.

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..