The residential yard at Kvarteret Landsfiskalen 1, in the area Herrgården in Rosengård, Malmö was built in 1971 and has since then been reconstructed twice, in 1984 and 2008. The yard is found in an area which was built during the years 1965 ? 1974, a period in which the swedish goverment approved a decision to build one million homes, and much of the events in this particular yard is also typical for the process in many other areas built during the same period.At the original construction the design of the yard was entirely incused by the pressure in time and finance, one was under at that time, in order to over- come the housing shortage. The design it has nevertheless been given, reflects the esthetic ideals of that time well.The building of the area was barely finished when the swedish authori- ties started handing out grants in order to support the rearmament of the outdoor environment in the areas built during the so called ?million program?.

Enligt Naturvårdsverket (2010) står Sveriges bebyggelse för närmare 40 % av landets totala energianvändning och detta måste minskas radikalt.  För att skapa en standard och göra det lättare för miljöarbetet har miljöcertifieringar instiftats. Enligt Sweden Green Buildings Council (2015b) finns det i dagsläget 4 stycken miljöcertifieringar: Miljöbyggnad, LEED BREEAM och GreenBuilding.Eftersom miljöcertifieringar blir allt mer populära har Tyréns AB upplevt en större efterfrågan på dessa. De har därför sett ett behov av att få bättre underlag för hur de som konstruktörer påverkas vid projektering för att kunna klara olika miljöcertifieringar.Detta examensarbete behandlar Miljöbyggnad och LEED och valdes därför att de gäller på alla typer av byggnader. För Miljöbyggnad användes ett referensobjekt, ?Kvarteret Jongärdan?.

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

The aim of this study has been to make clear the conception of ?The Garden City?, and also to investigate why and how the garden city has come to be a more frequent and attractive form of settlement in our Swedish community. The essay is supported by a literature study about the garden city from its beginning (1890?s) to present time. To make a distinct explanation of the garden cities progress over time, I have studied the idea behind two garden cities of today, Tullinge and Vistabergs garden city.

New dwellings and commercial buildings in coastal regions has for some time now been a focal point. Old industrial harbours are regenerated into modern living areas with a recreational purpose. In Sweden the marina has not taken part in this development, thus remained in the monotony and large-scale structures of modernism. This graduation thesis looks upon the marina from a landscape architects point of view, where the marina foremost is a social venue. By revealing and discussing the development of the marina, its design and environmental consequence theories of the marinas future is presented. These theories are later tested upon the costal village of Rydebäck, south of Helsingborg. The thesis is structured in three parts: marina knowledge, proposal and resources. In the first part the historical development of the marina from prehistory time to now is discussed.

The aim with the literature study is to inform about the risks that exists in large dairy farms(with focus on mastitis and hoof health) and to inform about the milk industry in Sweden.Personal comments from two study visits (Nötcenter Viken and Vadsbo Mjölk AB) arelinked together with the literature and forms into a discussion regarding sustainableagriculture versus the milk cow's welfare.The profitability for Sweden's milk farmers have decreased because of the decreased milkprice and current inflation. This leads to an increase in herdsize in order to make a profit.The milk cow herds in Sweden becomes fewer year by year and the herdsize increases. Theincreased herdsize can cause a decrease in the time the farmer spends per animal. This canaffect early disease detection and prolong the animals suffering.Swedish Board of Agriculture published (2008) statistics showing that today's milk cow ismedicated primarily because of two reasons; mastitis or hoof problems. Mastitis is thereason to two thirds of all treatments that are carried out.

In this thesis is studied the electrical load of Paradisskolan with respect to power quality and energy consumption. The school's owner Trollhättans Tomt AB is also interested to know if they can reduce their costs by changing to smaller meter fuses. A recurring ground fault that?s been recorded from powerpanel A1A has been investigated. The school's equipped with an electrical bonding system, harmonic filters for the third harmonic currents, TN-S system from feeding transformer and groundfault monitoring.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

Strömstad is a small city located on the Swedish west coast. Urbanization and development is acurrent issue for the municipally, as for many other in the current situation. The municipal housingcompany Strömstadsbyggen is one of the parties involved in the extensive development that mustbe implemented to meet the changes and developments which the issue holds.One area that is of interest in the discussion is Rådhusberget - this due to the existing infrastructureand unique qualities that the area holds. In order to achieve the best solutions possible for the area,Strömstadsbyggen wishes to listen to what the existing tenants at Rådhusberget thinks and feelsregarding the area and its future potential.This thesis has therefore been carried out in collaboration with Strömstadsbyggen and has beenaimed at identifying the current tenants' thoughts and opinions in the existing area of developmentand infill potential. The aim of this work was also to investigate how the tenants value their homeand local environment in its current state, and what their wishes are for the possible futuredevelopment of Rådhusberget.To achieve analyzable results concerning how the tenants perceive these aspects, an extensivesurvey have been carried out which were sent out to all tenants in the area.

Millesgården is a museum on the island of Lidingö outside Stockholm. It contains the buildings which were the home and studios of the artist Carl Milles and his artist wife Olga. It also contains the grounds that originated as the garden of their home. Carl Milles later developed the garden into a sculpture park where a great part of the sculptors works are on display. In this report only the sculpture park is treated.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

AB Realisator, ett management consulting företag med fokus på marknads- och affärsutveckling, har tidigare funnit att brandmän i dagsläget inte använder sig av någon form av robotar vid hantering av bränder. Således startades projektet FUMOTM; en robot vars främsta syfte är att gå in i bränder och filma/scanna ytan för att förenkla brandmännens arbete och potentiellt rädda liv. I framtiden har AB Realisator även funnit det möjligt att lägga till någon form av brandsläckningsmöjligheter och en robotarm på FUMOTM. Syftet med föreliggande rapport är att utvärdera vilka framtida produktionsmöjligheter som finns för denna robot. Arbetet innefattar att skapa en modulplattform för roboten, utforma de framtida tekniska lösningarna robotarm och släckanordning på ett monteringsvänligt sätt enligt Boothroyds DFA-metod, samt att ta fram ett monteringssystem som uppfyller den kravspecifikation som AB Realisator har lagt fram.