Stump treatment today requires large quantities of clean water mixed with the protective product Rotstop, to fully cover the stump surface. In order to reduce the water consumption without reducing the coverage of the stump surface, the pressure in the stump treatment device can be increased. Therefore, the Phlebiopsis gigantea (Fr.) Jül. suspension used as a biological control agent to prevent Heterobasidion annosum (Fr.) Bref. infection was pressure-tested.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

The city of Uppsala and its surroundings are a very expansive area. A prerequisite for a sustainable development of the area is well-functioning supply of drinking water. In Uppsala municipality, the Uppsala esker and Vattholma esker are the groundwater storages for drinking water. Besides the eskers, other sources of qualitative groundwater in the Uppsala municipality are relatively poor and more than half of the area consists of ground conditions with a risk of saline groundwater. The neighbourhood of Vreta-Ytternäs is situated 10 km south of Uppsala, in the area with risk of saline groundwater but outside the municipal water supply.

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report is about the impact climate change has on the water and sewage systems in general, and the situation in the municipality of Karlstad in particular. Which vulnerabilities are linked to water and sewage systems with regard to climate change and extreme weather situations, what are the possibilities to adapt the system to this and what significance does climate adaptation of the water and sewage systems have in relation to sustainable development?To answer these questions I have studied literature on the subject and interviewed several people who work with these types of questions. The answers I have received state that there are a multitude of vulnerabilities linked to the water- and sewage systems, but that there are also many strong interests which strive to take measures and adapt to a changed climate. I have also come to the conclusion that the starting points and views of the possibilities to act differs between the people that I have interviewed, but that theses problems are built into the concept of democracy..

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

ICA vill utveckla sitt miljöarbete i vattenfrågor. Denna rapport syftar till att öka medvetenheten hos ICA om verksamhetens miljöpåverkan genom att analysera vattenfotavtrycket ? vanligen kallat Water Footprint ? för ett livsmedel. Vattenfotavtryck är ett verktyg inom miljösystemanalys som används för att kartlägga sambandet mellan produktion och konsumtion av produkter och vattenanvändning. Studien visade att vattenfotavtrycken är ungefär 14 500 liter/kg och 16 500 liter/kg för svensk respektive irländsk nötfärs.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The environment that surrounds us affects us all. Research has shown that we feel physically and emotionally best in natural environments with greenery or water elements. Urban environments are likely to be more stressing then natural environments. How we experience specific elements, as water, of an environment is not as much investigated. There is a need of further knowledge for us to fully understand the interplay between our senses and the environment. Human beings have always been depending on water and the search for it has characterized our deeds and doings through out evolution.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.