Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

It is estimated that 22 000 contaminated areas exist in Sweden today. In order to classify the risk of contaminant migration from these areas and to prioritize which of these contaminated areas should first be treated, the Swedish Environmental Protection Agency (EPA) has designed a method, for the investigation of contaminated areas (MIFO). One of these contaminated areas is the landfill Gräsötippen outside Köping. The landfill has been used by both Yara AB and the Köping municipality between the years 1945 and 1975, and both industrial and household waste have been deposited there. The aim of this report is to survey which contaminants that can be found in the soil and water in the landfill Gräsötippen and to evaluate the migration of these contaminants.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

Large areas have been ditched in Sweden during the past 100 years to improve the forest production. Ditching and also maintenance of old ditches are operations having mainly negative effects on water quality, flora and fauna and changing characteristics of soil. The purpose of this study was to suggest a method for inventory of the need for ditching maintenance in old forest ditches that takes biodiversity, water protection and forest production into consideration. Inventory methods from five Swedish and Finnish forest companies, agencies and organisations were compared. Their employees were interviewed about their handling with ditches, forest production and nature conservation.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Wastewater contains biodegradable materials, which are often measured as BOD7.Trickling filters are sometimes used as a purification step for BOD-reduction. Atrickling filter is a tower, which is filled with a carrier material. Microorganisms growon the carrier material in the form of a biofilm. This biofilm consists mostly of bacteriathat purify water from BOD.In Älgarås? wastewater treatment plant the water is purified by a trickling filter.However the treatment plant has difficulties reaching the emission requirements forBOD.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.