In this essay, I want to achieve an accessible and applicable entrance to Alexander Technique as a method for learning to use the body in such a way as to allow emotional expression in music. It is necessary to see the real need of Alexander Technique for the active musician, and therefore important components of music-making will be presented. These components are presented from an Alexander-perspective in order to produce a clear picture of the method of application.The prerequisite for emotional expression in music is musicians and music listeners with the ability to generate, and respond after emotional impressions. Alexander Technique provides an approach to make it easier for musicians, especially guitarists, to express emotions in a performance situation.After years of practice and obtaining musical knowledge and practical skills at the instrument, it is common that muscle tension and ingrained patterns contribute to limited expression. Muscle tensions arising from pressured situations such as auditions, competitions and concerts.

This study discloses the responsibility of social work for the Swedish welfare state respective deacons in the Swedish protestant church, which roll the Swedish protestant church have in the existent welfare and also if deacons experience any expectations and how these expectations in that case are expressed.The aim of this study was to investigate the relationbetween deacons working within the Swedish protestant church and social work, as it appears for professional deacons. The method of investigating the questions raised by the aim of this study has been qualitative analysis of answers derived from six deacons working in different workplaces. The data derived from these interviews was then analysed through the theory of Gösta Esping-Andersen about welfare states and also through background research and earlier science research about the social work within the Swedish protestant church and other social work. The result of the study show that the welfare state in Sweden has the comprehensive responsibility for the citizens. Deacons working within the Swedish protestant church does not have the same responsibility.

The aim of this study has been to discuss ideas of knowledge within classification theory and subject analysis in the light of theories of fundamental changes in the production of scientific knowledge. Guiding questions have been: How have the conditions of knowledge production changed? How has interdisciplinarity as part of this development evolved? What assumptions lie behind theories of classification and subject analysis? How do these stand in relation to the alleged changes in the production and understanding of science? Three works about the changing conditions for knowledge production and the growth of crossdisciplinarity have been presented and discussed. These works stress the loosening up of boundaries between traditional knowledge domains and open up for discussions about how to organize knowledge production in the light of these changes. In the study it is argued that their works also could open up for discussions about the way knowledge is organized for retrieval purposes.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

Today, Sweden is to be regarded as a country formed by the influences and effects of immigration. The government is considering integration as a process aimed to influent all forms of welfare politics and as a project working both at an individual and at a social level. The aims of integration policies are to guarantee equal rights and opportunities, to form a public community characterized by diversity, and to mobilize all citizens to participate in and to be jointly responsible for a social development characterized by mutual respect and tolerance. During the Swedish election campaign of 2002, integration policies became one of the most reported and discussed political questions in the media. The aim of this essay is to study and analyze discursive statements on integration policies made by politicians during this election campaign.

The previous research in the field of new religious movements has mostly focused on the spectacular parts where phenomena such as ?brainwashing? and the ?charismatic leader? have attracted both media and the scientific studies of religion. Professor Liselotte Frisks has done several enquiries about sects and new religious movements in Sweden. One of her main conclusions is that the relation between these new religious movements and the rest of society has changed; a relation that used to be characterized by conflicts and tension is now becoming more open as both parts are changing.This study does not focus on the spectacular parts. Instead I have studied something more common and general.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Background: Because of the high unhealthy rates among women in the com-mune a project to reduce it have begun. For this reason we have been given the mission from the commune of Sotenäs to study the character of these women's health. Objective: To study the health among permanent employed women in the commune of Sotenäs. Method: Quantitative method. The data have been collected through question-naire survey.

AbstractAs human beings, we are all governed by our innate instinct that to kill another human being, or to just inflict pain on another, is to go against what makes us human. Still, it happens every day, far and near. Some of these killings happens in war-like situations, where atrocities against humanity occur. The international community has since the founding of UN in 1945, a duty to intervene where crimes against the human rights occur. This is a difficult task, because, in order to intervene and help those in need, the situation might postulate states violating states sovereignty.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

De senaste årtiondenas explosionsartade teknologiska utveckling har gett oss möjlighet till en mer stillasittande och inaktiv livsstil framför skärmbundna aktiviteter som datorer, surfplattor och smartphones. Det leder till en avvikande hållning. En avvikande hållning i nacke och axlar definieras som ökat framskjutet huvud, ökad thorakal kyfos samt protraherade (framskjutna) axlar. Genom ökad aktiv eller passiv tension av pectoralis minor har forskare antytt att det kan påverka skuldrans kinematik för individer med nack- och skuldersmärta. Syftet med studien var att utvärdera om töjning av pectoralis minor med behandlingsmetoden Ventral Töjning Pectoralt (VTP) har någon inverkan på individens avvikande hållning genom korrigering av axlarnas och nackens position.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

This two years master?s thesis is a review and exploration of the Swedish debate concerning children?s literature from the 19th century to the present, as well as the evaluation and analysis of four adaptations of the tale Red Riding Hood. The aims are to identify how ideas and values regarding the role of children?s literature in society have developed over time and to contribute with a knowledge base for continued reflection and discussion on the subject of children?s reading and mediation of children?s literature in public libraries.The theory and method used in the thesis, is primarily based on the discourse analysis of Michel Foucault. I have identified four main discourses: the educational discourse, the liberation discourse, the politicized dis- course and the popular discourse.

Zoo animals can be more or less disturbed by the presence of care takers as well as visitors. This may lead to stress and/or abnormal behaviour. The purpose with this study was to give a time budget of the behaviour of the captive wolves? (Canis lupus) and occurrence of behavioural disturbances and how this is affected of human visitors. For this purpose the wolves at Nordens Ark have been studied during off season as well as on season. The zoo Nordens Ark is an idealistic foundation which was founded in 1988 and is located at Åby säteri, 130 km north of Gothenburg.