The freshwater pearl mussel (Margaritifera margaritifera) is threatened throughout its range. There has been a substantial decline of the species and one major reason is habitat degradation. We investigated how the substrate composition of the bottom floor affects the regeneration of the mussel by analyzing data from the Västerbotten County Board?s inventory of the freshwater pearl mussel. The results implied that fine material such as fine sediment and sand might be detrimental to regeneration whereas gravel and boulders and in particular stone seem to be beneficial.

In the end of 1998 the company Holmen Skog AB was certified accordint to the FSC system with an area of 1 036 000 hectare. After that Holmen Skog AB has been working actively with the nature conservation in the forestry. In order to control the quality of the company?s nature conservation in final fellings they started a yearly inventory which is called BAKRUS (Judgement of ecological and culture care in relations to policies for a persevering silviculture). After 1999 the control was expended to include all actions in the forest.

In the tropics, logging and wild fire can result in degraded secondary forests with lower biodiversity than in the natural forest. One way to limit forest degradation is to rehabilitate the present large areas of secondary forests. However, there is a lack of knowledge concerning the ecology of tropical tree species and further studies would be advantageous for future rehabilitation efforts of degraded rainforest. The objective of this study was to investigate how mother trees in secondary forest and different site factors affect the abundance and spatial distribution of natural regeneration of non-pioneer tree species in a tropical rainforest in Sabah, Malaysia. The study took place in the INIKEA Forest Rehabilitation Project area, which suffered from wild fire in 1983 and has been selectively logged over both before and after the fire. Natural regeneration and site variables were inventoried in plots, while mother trees were inventoried in the whole survey area.

Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The price of Swedish forest properties has gone up by 77 percent during the past five years. Amongst private forest managers the high price level signals optimism and confidence for the future. Many forest owners manage large capital in the forest and a planned economy is to a larger extent demanded to achieve a positive economic result. Forest is long-term and to maximize a single year without planning for the years to come results in less optimization of the parameters available to achieve a favourable economic result. This case study investigates the investment of two forest properties situated in Götaland. The management of the forest has been planned for both properties during a period of ten years.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

The Regional Forestry Board in Värmland- Örebro needs increased knowledge on silviculture in broad- leaved forests. This thesis is an inventory of naturally regenerated broad leaved forests, and the results from the inventory have been compared with The Regional Forestry Board?s demands on regeneration results. The result of this inventory was that the regenerated sites were suitable for broad leaved trees, but only half the number of the stands fulfilled the demands of regeneration results of The Regional Forestry Board, mainly because of gaps in the stands. The gaps in the stands were mainly caused by lack of soil preparation and seed trees..

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.