A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

ThisreportisathesisfortheTechniciansinComputerAidedDesignprogramatHalmstadUniversity.Thegrouphasdevelopedamillingmachinemainlyusedforfiberboards,onbehalfofJohanWretborn..

In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

The purpose of this paper is to examine the three main translation methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The methods discussed in this paper may well be improved, or perhaps replaced by others in the future..

Who runs the development? A comparative study of the construction of residential buildings in Nacka and Södertälje.The aim of this study is to identify actors involved in the initiation and implementation of residential house construction in two Swedish municipalities. This means who is taking initiative for new residential buildings, who affects the planning process, who finances these new buildings and who builds them. By exploring empiric material from the municipalities of Nacka and Södertälje, the above questions will be answered and by referring to pluralism, growth machine theory and regime theory a link to general theories of political science is made. The results found show that the analysed municipalities have quite different possibilities for acting and that these backgrounds are also important for which actors will take initiative for new residential buildings and which actors will be allowed to state their opinion during the planning process.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.