The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

The last few years have been characterised by increasing online communication and the emergence of social media, made possible by Web 2.0. In society as well as in research, social media is used for knowledge produc- tion and networking. One example of this is Mendeley, a social reference management tool. With answers from users all over the world, this study investigates the use of Mendeley, if the respondents use other social media and if all of this affects scientific communication. The aim is also to study what the respondents think about the future of scientific communication and if this can be related to current tendencies.The theoretic framework for this study is based on Leah Lievrouws research on the Cycle of Scientific Communication and the relationship between the ?Little Science 2.0?-scenario and the ?Big Science Retrench- ment?-scenario.A qualitative web based survey was conducted (41 answers) and complemented with an interview with a professor in environmental sciences.

SRG Carrier Systems AB har tagit fram en ny maskin MPM 160 där MPM står för Multi Purpose Machine. Den är en typ av redskapsbärare i storleken av en skogmaskin som beroende på vad den utrustas med kan fungera som i princip vad som helst. Hytten på denna maskin skall om så önskas alltid kunna stå horisontellt. Detta skall kunna ske automatiskt eller manuellt och tiltningen sker med hjälp av sex stycken hydraulcylindrar.Arbetet i denna rapport avser skapandet av det automatiska systemet. Styrsystemet har skapats i mjukvaran CANmaster från Hydratronics AB.

The purpose of the study was to discover how nurses can maintain a good quality of life for cancerpatients at the end of life. We examined seven scientific articles in accordance with Polit, Beck & Hungler (2001) criteria for scientific validity. We used Carnevali's (1996) model of demand and resources as a frame of reference. The results showed that physical, psychological, social and spiritual needs affect quality of life in different ways. It also came out that it was difficult to measure something as individual as quality of life..

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

A new type of forest tree seedling, called mini seedling, has been developed by the University of Dalarna in Garpenberg, Sweden. Compared to traditional containerized seedlings that are grown for 1 ? 2 years, mini seedlings are grown for only 10 weeks. The mini seedlings are small, easily planted, cost effective, and reduce the amount of chemicals used in the nursery. Research has shown that mini seedlings tend to have higher overall survival rates than traditional container seedlings.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

The International Organization for Standardization (ISO) proposes vibration standards for the evaluation for machine damage due to vibration in rotational machines, where some vibration parameters are given to measure the vibrationgrade. This work evaluates the relevance of the vibration standards in hydro plants that are proposed by the ISO, and also investigates if there are methods used in other countries could have greater importance. Through statistical analysis of collected data we got a better understanding of relation among different vibration parameters, and also the importance of correct choice of the parameters for the evaluation of vibration. We have found that the vibration standards available today in hydro plants are not reliable for the judgment of vibration?s grade.

Barnoveraller är ett specifikt område inom klädesbranschen. Det ligger lång produktutveckling bakom, som har pågår under ett flertal år, vilket har förbättrat slutprodukten vad det gäller material, beläggningar och sömnadstyper.I B-uppsatsen finner du lättare materialinformation, konstruktionsinformation, nationella samt internationella standarder, krav ställda ifrån tre olika företag och utav ?barnoverallskunden?. Det här samarbetet blir vårt försök att bidra till barnoverallsmarknaden.Vi har utgått ifrån vår referens, ett privatägt barnklädesföretag från Bollebygd, Sverige.1 De har gett oss möjlighet att få vara med i produktutvecklingsprocessen och leta förbättringar som kan gynna slutprodukten och 2bseen som företag. Det har också gett oss möjlighet att skänka något litet (en sammanställning) som kan användas av fler företag i liknande bransch och situation.2bseen önskade sig ett samarbete där vår roll skulle innebära en fortsatt produktutveckling på befintliga produkter som i produktion fått ett och annat fel.Childrens clothing is a particular area of clothing business.

This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.