During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The calcium homeostasis in the body is normally strict regulated to be kept within very narrow limits. This regulation is due to the action of parathyroid hormone (PTH) which is synthesized in the chief cells of the parathyroid glands. In different diseases, the calcium homeostasis is disturbed and this could either be due to a dysfunction of the parathyroid gland itself, or it could have a completely different explanation. To investigate disturbed calciumhomeostasis, ionized calcium and PTH can be analyzed from a blood sample. There are a lot of different assays to measure PTH in humans.

This is a qualitative study aiming to find out how and why teachers work with art, music and movement in the English subject in the early years. In this study we have conducted a background study of previous research and as a starting point and as a point for reference we have relied on education policy documents like The Common European Framework of Reference for Languages and the Swedish curriculum for the English school subject. Our research has consisted of interviews with six teachers and ten observation occasions in a total of three different primary schools. Our result show that there seems to be a consensus in both theory and praxis when it comes to integrating art, music and movement in learning and teaching of English in the early school years. The use of methods including art, music and movement in early language learning seems to promote the language development for all students but especially for young learners that require extra support for their language development.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

Electrooculogram (EOG) data was used to develop, adjust and validate a method for drowsiness detection in drivers. The drowsiness detection was based on changes in blink behaviour and classification was made on a four graded scale. The purpose was to detect early signs of drowsiness in order to warn a driver. MATLAB was used for implementation. For adjustment and validatation, two different reference measures were used; driver reported ratings of drowsiness and an electroencephalogram (EEG) based scoring scale.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

A research of 14 toxic affected study sites in Sweden showed a significant increased proportion of deformed diatoms. The six metal polluted study sites in the region of Dalarna showed a 4, 2% average of deformed Fragilaria (deformed diatoms reference sites, 0, 1%). The results also indicate a significant increased proportions of deformed diatoms in the eight pesticide polluted sites in the south and middle of Sweden, compared to the reference sites, howsoever the toxic content was low. The results indicate that there are no lager differences in neither teratological forms nor variations that segregate metal polluted and pesticide polluted shells. One of the reasons may be that both heavy metals and pesticides can affect the development of the diatom shell..

One of the environmental problems today in seas, lakes and streams is eutrophication. This is often caused by nutrients such as phosphorus (P) and nitrogen (N) that leak from agricultural areas. A measure to partly prevent the nutrient discharge is to construct or restore wetlands.In order to control the efficiency of nutrient reduction of existing wetlands in the county, the administrative board in Västra Götaland wants to find different criterias for reference wetlands. These reference wetlands should represent other wetlands and be used in future evaluations of reduction of nutrients and design of constructed wetlands. According to the administrative board in Västra Götaland the reference wetlands should have a catchment area of about 50 hectare consisting of at least 70 % arable land, to represent wetlands created to remove nutrients.

This thesis presents the results of the implementation and evaluation of two machine learning algorithms [Baz98, GB97]based on notions from Rough Set theory [Paw82]. Both algorithms were implemented and tested using the Weka [WF00]software framework. The main purpose for doing this was to investigate whether the experimental results obtained in [Baz98]could be reproduced, by implementing both algorithms in a framework that provided common functionalities needed by both. As a result of this thesis, a Rough Set framework accompanying the Weka system was designed and implemented, as well as three methods for discretization and three classi cation methods. The results of the evaluation did not match those obtained by the original authors.

This master thesis concerns the subject of a reference service named Book-a-librarian. The service makes it possible for the library-user to indulge in a subject with the help of a librarian after having made an appointment in advance. The main purpose of this thesis is to study the function of it. The methods used are a mix of literature and empirical studies to be able to comprehend and explain the practical nature of the service as well as placing the service in a theoretical framework. The empirical study is performed by a questionnaire, where librarians working with the service are asked to participate.

This bachelor thesis is about communication problems and treatment during the reference interview. The purpose was to investigate the reasons of why users? information needs are not always understood by the librarian and what to do about it. I have also investigated what kind of skills that can be useful for librarians to have and how a librarian can act in a way that makes the user feel welcome during the reference interview. The method I used was a literature study and an own study through interviews of library users.