The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

In the recent years auditing scandals all around the world, deficient internal control has attracted a lot of attention. This has contributed to further requirements on insight and internal control. Those scandals have seriously damaged the auditor?s profession and contributed to a reduced trust among the public. Therefore an extensive work to recover and stringed the trust was started all around the world.

Stockholm is one of the fastest growing cities in the world. Its population is growing every day and the housing needs are becoming higher. Despite the growth and the need for more houses only a few new housing units are being built every year. Critics argue that if the building rate stays as it is today the development of the city will be very limited since there is no capacity for the city to embrace new incomers.The decision makers in the municipality of Stockholm are planning for large investments in housing units for the coming years up until 2030. There are plans of building approximately 140 000 new apartments to mend the ascending need for new houses.Farsta County is part of Stockholm and lies a few kilometers to the south of the city center.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

In the world we live in today the environmental issues has become increasingly important, and we have begun to realize that we can not continue to use fossil fuels at the rate we do. When it comes to generating electricity we are constantly trying to come up with cleaner and more efficient solutions. The fuel celltechnology is one such alternative and has been around for over 100 years. Yet, it is not until now that the world has started to notice this great technology. The fuel cell has been developed in several areas and can today be used for handheld electronics, vehicles and small settlements.

The enterprises of today are beginning to realize that environmental issues are a important part of their activity. Companies and organizations are expected to a greater extent communicate their environmental work to the world surrounding them in a trustworthy and structured way. Lack of information or information that is incorrect may bring farreaching consequences. Communication is mentioned in several of the ISO 14001-standards. But what is missing is a guideline how companies should act to create and be sure of the quality of the data that can be used in the environmental communication.

Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar.

In connection with the admittance of the EC-directive (99/31/EC) in Swedish politic, through the constitution of waste depositing (2001:512) at year 2001, the rules about management the landfills and leachates tightened. At the landfill Vissberga in the municipality of Hallsberg, a leachate treatment plant was constructed just a year thereafter. This treatment plant consisted of an aerated pond with a following land treatment and a willow cultivation to replace the land treatment during the summer. In this case the parameters, which were estimated as the most important to reduce, were iron and nitrogen. The iron would react with the oxygen-rich water in the aerated pond and precipitate to ferric-hydroxide and than settle in a calm zone of the pond.

In the Kolmården area, northeast of Norrköping in south-central Sweden, it was discovered that shoots of spruce Picea abies, plants to a seemingly large extent had been browsed by deer. The area inhabits a dense red deer population, alongside with moose and roe deer, and red deer is thus suspected to cause the damage. The main purposes of this study are, however, to estimate the extent of the shoot-damage and to investigate what factors that may affect the browsing of shoots. For each stand information was recorded about the age of the plants, area for the stand, height over the sea for the stand, site productivity, type of plants and stand-history. The study was done in three areas: Simonstorp, Stavsjö and Valinge. At Simonstorp and Stavsjö, respectively, 10 stands were chosen for study and on Valinge six stands. In each stand, 10 plots were sampled.

1. Reaction on burial depth and nitrogen availability and placement in competition with a crop In this trial it was investigated how couch grass (Elymus repens) changes its ability to compete in stands of wheat and barley with different burial depth and different amounts and placement of nitrogen. More knowledge in this area can be valuable in the attempt to decrease the use of herbicides and still keep the weeds under control. The trial was carried out in the summer of 2004 as an outdoor pot experiment. The pots contained 15 litres of soil with a surface of 0,06 m2.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.