Background: Fall injuries are a costly problem for society, with costs ranging up to 14 billion a year. In addition to economic loss accidental falls also creates human value losses and reduced quality of life for its victims. In order to prevent the occurrence of injury related to accidental falls healthcare providers utilize various scientifically developed risk assessment tools, one of them being Downton Fall Risk Index. Method: Empirical, quantitative cross-sectional study. Objective: The purpose of the extended essay was to describe the categories in Downton Fall Risk Index that have a bearing on patients' risk of falling while in hospital and in municipal care, and to illustrate how nurses can use the fall risk assessment tool.

In connection with Henriksdals wastewater treatment plant (WWTP) a smaller plant is situated called Sjöstadsverket where new methods for wastewater treatment are tested and evaluated in different process lines. On one of the lines experiments with enhanced biological phosphorous removal (EBPR), have been carried out to evaluate if it is a good alternative to traditional chemical phosphorus removal. This thesis evaluates the results from the experiments conducted during fall 2005.The incoming water from Hammarby Sjöstad consists of only household wastewater, which gives a wastewater with high concentrations of nutrients and organic carbon. This is partly positive, because one of the limiting factors for effective biological phosphorus removal is the lack of easily biodegradable organic carbon. The high concentrations of ammonium and phosphorus demand a high reduction to achieve the requirements of outgoing concentration.To optimize the process experiments with different recirculations and different aeration techniques have been made.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Beef production in Sweden has traditionally been about rearing of dairy calves to slaughter. With reduced number of dairy cows and accordingly less dairy calves for slaughter, there has been a need for new forms of beef production in Sweden. In Västerbotten there are good conditions for beef production with a high feeding level of roughage due to favourable climate. The aim of this thesis is to, through interviews with ten farmers with beef production in Västerbotten, study what and with how much they feed their animals and link the results to production level. The thesis begins with a literature review where the general feeding standards and feeding recommendations for beef cows and growing cattle are examined.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

The production of ferrochromium alloys at Vargön Alloys AB contributes to formation of unwanted ferrochromium dust, which contains toxic Cr(VI). The dust is since summer 2005 treated with an iron-sulphate solution to reduce Cr(VI) to the non-toxic Cr(III). A year later the treatment technique was improved and disposal occurs in cells on the landfill. The cells can be up to 300 m3 and the edges can be made out of fro example concrete. Tests are conducted on the treated dust when it is disposed.

Torstensson, Niklas (2012): Anledningar till olikheter mellan Svenska kommuners skolkvalitet (Causes behind the differences in Swedish municipality´s quality of school) Örebro University.This essay is an explorative case study that will compare four Swedish municipalities quality of local school system against the municipality ´s backgrounddata and a governing document: Skolplan. This study begins in a previous benchmarking study made by one of Sweden?s teachers unions Lärarförbundet. This is a statistical study that ranked the Swedish municipalities against each other?s according to their accomplishments in a number of areas related to their school systems.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

A problem in the field of district heating is the oil burners needed to provide power when a peak load occurs. One possible way of reducing the needed amount of oil is to reduce the power demand for space heating in the district-heating substations when the need for district heating water exceeds a certain limit. This can be done by use of a locally working controller function.In this Thesis the options concerning load priority are evaluated. To evaluate the potential for using controller functions concerning peak load priority an experiment was brought out in a chosen district-heating substation. The impact on the indoor thermal comfort during a heat reduction was also taken into account.

In veterinary medicine, penicillin is the most used antibiotic in Sweden. Two dosage forms of penicillin are available in Sweden for use in horses, sodium benzylpenicillin (Na-pc) and procaine benzylpenicillin (proc-pc). Proc-pc is the most used dosage form and is used for intramuscular administration which allows horse owners to treat an animal at home under veterinary instruction. Na-pc is only approved for intravenous use in horses. Penicillin is normally well tolerated by horses but a serious, sometimes life-threatening, adverse reaction called penicillin shock may occur.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Dampness in the indoor environment have been a major issue of discussion the last decades since more and more people complain about their indoor environment. In the present situation there are difficulties to find what causes people?s discomfort in a damp environment even though there is a strong connection between dampness and human health.The aim of the thesis was to contribute to the work done today to achieve a better indoor environment in damp buildings. The purpose of the work was to evaluate whether the measures issued for dampness in the indoor environment contributes to the improvement of health and environment for those who are living or working in that space. Through a literature review, interview and survey the following three questions were answered to achieve the aim and purpose:How are people affected by the indoor environment in damp buildings?Which are the measures issued to prevent dampness in the indoor environment?Do these interventions contribute to a better indoor environment?How people are affected by the indoor environment in damp buildings and how these problems are prevented were the foundation for the continued work with the survey.