Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

Estimation of the variation in the integrated hydraulic conductivity around the Tunåsen infiltration facility - An investigation of the effects of uncertainties in existing informationAlmost half of Sweden?s drinking water volume is produced from groundwater. The main fraction of this is extracted from eskers, some of which allow for very large extraction rates. Despite this, the groundwater volume is not sufficient in some areas. This has led to an extensive use of artificial recharge.In Uppsala, the total volume added through artificial recharge is divided between four infiltration facilities.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The digital map product kNN-Sweden contains nationwide data of the country?s forest land. The estimated forest variables are mean age, mean tree height, volume per tree species and total volume. Today Södra Skog?s assessments of timber potentials are mainly based on experience rate and subjective assumptions.

Background and problem: In March 15, 2009, the third piece of money laundering directive was introduced which mean a more strict legislation in control against money laundering and terrorist financing. The directive is based on a risk based point of view which means that the resources should be used where the needs are. The responsibility for financial companies and other parts are bigger then before which means that they have to get a more extensive customer knowledge etc. It has however been appeared that the directive in some cases lack of precision and clarity which creates an insecurity among those who are included by the law. Purpose: The purpose of this paper is to examine which consequences the third piece of money laundering will bring on the banks customer relationships and how the employees work assignments at the banks will be affected. The authors also want to examine how the extension of money laundering will be affected and clarify if there is any indistinctness about how the application looks around the banks.Method: The authors choose to use a qualitative method and the empiric material has been collected through personal meetings, telephone interviews and through e-mail answers. Conclusion: The majority sees the third piece of money laundering directive as something positive which will protect both the banks and their customers.

The presence of cystic ovarian follicles represents an important ovarian dysfunction and is a major cause of reproductive failure in dairy cattle. A cystic ovarian follicle is a persistent follicular-like structure on one or both of the ovaries. It is at least 2,5cm in diameter and it has to persist for at least ten days while a corpus luteum is missing. There are two kinds of cystic ovarian follicles, those who have a progesterone production and those who have not. A clear definition for this condition is lacking, probably because the heterogeneity of the clinical signs and the complexity of the disorder.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

Wetlands are important ecosystems and form habitat for both common and threatened species. In Sweden, as well in many other places on earth, there is a lack of wetlands. There is an expressed will to adjust this lack through restoration of wetlands with reduced function and through construction of new wetlands. Follow-ups and evaluations are important steps to optimize these actions. The wetland Vattenparken was constructed 1999 ? 2000 for treatment of surface water.

The purpose of this master thesis is to map and analyze the appropriate valuation approaches used for Intellectual Property rights and develope a model for valuing patents. This project has been executed on behalf of Electrolux?s Group Intellectual Property and is intended to be used for managerial purposes.Project limitations include patents that doesent concern technology oriented products and services, real option methods, financial forecasts, decisions concerning patents taken by the R&D division, patent applications in general and taking into account unexpected future management decisions regarding patents.Electrolux?s Intellextual Property team applies, manages and protects the groups Intellectual Property rights including patents, designs and trademarks. With an increased globalization and the rise of emerging markets, incentives have increased further to protect and safeguard the group?s innovations.Mainly there are three different valuations approaches for valuing intellectual property rights, these include the income based approach, cost base approach and market based approach.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.