This study is based on a statistical analysis of fundamental key ratios on the Stockholm Stock Exchange during the period 2004-2012. In total 35 financial ratios of 90 companies were tested, ultimately five ratios remained within the 5% significance level. These ratios were ROA, P/B, Total Yield, EV/EBIT and Operating Margin. A custom made investment model was created based on the purpose to achieve a risk-adjusted excess return. The results in general did not show any significant difference in return between the model's portfolio and index.

The market for security is one filled with great opportunities. The security services companies are numerous and diverse, the Swedish market is dominated by two large companies: Securitas Bevakning AB and Falck Security AB. In this study we have focused on the bigger of the two, Securitas. This report describes and analysis the security service branch and its surroundings in an involved manner. The target group of the result is mainly people within the security branch.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This study began with a mission statement from the firm Tobii Technology AB to identify customer needs in the relatively new and rapidly growing market for eye tracking analysis. After consuling external experts, the authors however found that the availability of previous academic published market studies of new and fast growing markets was poor. Therefore a decision was made to execute the task and at the same time create a methadology for future studies in this area. The identification of customer needs, which formed the basis of the insights and analysis, led to frequent discussions between the authors and the firm's supervisors. This resulted in a project plan and a decision that an iterative model would be used, were earlier decisions would be questioned and refined throughout the project.

The forecast ability of four well-known exchange rate models for theSwedish krona is tested in this thesis. The models that are tested arethe purchase power parity, the real interest differential model, thesticky-price model and a productivity model. In addition to thebenchmark, the random walk, they are also compared to each other.They are all tested on three different horizons one quarter, two quartersand four quarters. The mean squared forecast error criteria and thedirection of change criteria are used for evaluation of the forecastability. Only in a couple of cases are the forecast ability of thetheoretical based models significant better than the random walk..

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements.

The purpose of this study was to evaluate Komm-A, a model for usingcommunication books in clinical practice for people with aphasia. The studyconsisted of two group studies and one case study. One of the group studies had apretest-posttest design and consisted of nine couples; a person with aphasia andhis/her communication partner. The material used was Quality of communicationlife scale (QCL), Communicative effectiveness index (CETI), Goal attainmentscaling (GAS), and a questionnaire to the communication partner. The other groupstudy consisted of seven speech-language pathologists who worked with thecouples according to the Komm-A model.

Three years after the Bosman case, it was decided that a socio-cultural approach on sports be introduced in Europe. EU presented a formulation for the same purpose ? The European Model of Sport. The purpose of this formula was to maintain the socio-culture and traditional ap¬proach to all kinds of amateur and professional sports in Europe. If we were to com¬pare this model with the American model of sport, it shows many different ways of thinking in terms of organised sport.

Syftet med denna uppsats är att med hjälp av exempel och illustrationer förklara och klargöra tillvägagångssättet för Amin och Kat?s version av Dybvig?s Pay-off Distribution Pricing Model samt Keating och Schadwick?s Omegafunktion. Vidare ämnas Pay-off Distribution Pricing Model, Omegafunktionen, Sharpekvoten, Jensen?s Alpha och Treynor-index beräknas på icke-normalfördelade distributioner i form av avkastningar på hedgefonder samt normalfördelade avkastnings-distributioner på aktiefonder. Resultaten från dessa beräkningar kommer att rankas och jämföras främst genom att söka observera likheter och olikheter.

This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.