The Apollo butterfly, Parnassius apollo, is categorized as Near Threatened (NT) in IUCN Red List. Today in Sweden it is found only in strongly fragmentized populations. In the county of Stockholm, P. apollo exists exclusively in some islands of the archipelago and with one mainland population in Stora Vika. This study has the purpose of expanding the knowledge of the local conditions for the butterfly in the south parts of the county of Stockholm and thereby contributes to a sustainable land management that can preserve the Apollo butterfly.A comparative study was done between areas where the butterfly today have: a stable population (Stora Vika, Utö and Ålö), has disappeared (Muskö and Yxlö) or is strongly declining (north part of Ornö).

The largest project at the AICG lab at Linköping University, Cognitive models for virtual characters, focuses on creating an agent architecture for intelligent, virtual characters. The goal is to create an agent that acts naturally and gives a realistic user experience. The purpose of this thesis is to develop and implement an appropriate learning model that fits the existing agent architecture using an agile project methodology. The model developed can be seen as an online unsupervised reinforcement learning model that enhances experiences through reward. The model is based on Maes model where new effects are created depending on whether the agent is fulfilling its goals or not.The model we have developed is based on constant monitoring of the system.

A vulnerable group in society is people with ASD (autism spectrum disorders) or autism. This group seems to increase, mainly due to genetic factors but also environmental problems. Medical research has accelerated in the U.S. and Europe. The biggest problem for people with disabilities is the inability to communicate, both verbally and socially.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

Att förstå sambandet mellan miljövariabler och fiskarters förekomst eller abundans är en väsentlig del i att bedriva ekosystembaserat bevarandearbete och ekologiskt hållbart fiske. Tånglaken, Zoarces viviparus, var klassad som nära hotad på rödlis-tan 2010 och på HELCOM Red List of the Baltic Sea 2013. Tånglaken är utbredd över hela Östersjön och används som en bioindikator för föroreningar i havet Att förstå vad som styr tånglakens utbredning är alltså viktigt både ut bevarande syn-punkt och ur miljöövervakningssynpunkt Meningarna går isär angående dennes ha-bitatpreferenser. Med hjälp av data i form av uppmätt djup och videosekvenser från provfisken inom projektet BONUS INSPIRE och data i form av rasterkartor för andra miljövariabler har generalized additive modelling gjorts för tånglakens före-komst i Östersjön. Tre slutgiltiga modeller valdes ut baserat på förklaringsgrad.

In Sweden everyone has the possibility to report deficiencies in animal welfare they encounter. They report this to the county administration in their county and such a report is called a complaint case. Complaint cases are normally handled with animal welfare inspections, carried out by animal welfare inspectors from the county administration in the county where the animal keeper with reported deficiencies lives. The county administrations in Sweden receive a lot of complaint cases that differ in grade of how severe the deficiency is. The complaint cases are given priority by how severe the deficiency seems to be.

Emerging infectious diseases are a recurring threat to both human and animal health. Understanding the multiple causes behind the emergence of new diseases is key to the prevention of new and potentially devastating outbreaks. The list of underlying causes is long, including a variety of anthropogenic, environmental, molecular and climatic changes that promote the emergence and spread of disease. Two of these factors are central to the emergence of new diseases and receive special attention in this study. The spread of disease from wildlife to livestock and diseases that spread from animals to humans (zoonoses) are of importance as they implicated in the majority of EID events.

A vulnerable group in society is people with ASD (autism spectrum disorders) or autism. This group seems to increase, mainly due to genetic factors but also environmental problems. Medical research has accelerated in the U.S. and Europe. The biggest problem for people with disabilities is the inability to communicate, both verbally and socially.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Abstract This Concept Analysis according to Walker & Avant (1995) studies the concept of uncertainty in the nursing context. It consists of four parts where uncertainty in general have been encircled in a semantic analysis (part one) and a qualitative content analysis consisting of an questionnaire, distributed to the staff members at one nursing and medicine institution, with an open question about the meaning of uncertainty (part two). The third part is a literature study of the nursing context to find out how uncertainty is described (part three). Part four is the actual concept analysis based on the three first parts. Uncertainty in the nursing context is an individual conscious experience witch is changeable and impressionable. It is chained together with its antecendents and consequences.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

The company Pilotfish has developed the system MIVEO which is used by car-sharing to wirelessly monitor, book or otherwise manage a fleet of cars. In a car pool the system has three different types of users with varying degrees of eligibility. These are end users, administrative and service personnel. We have chosen to focus on opportunities to streamline the administrator and service personnel work with a mobile service, as these users of MIVEO often are movable and mobile. From this position we have in the study attempted to answer the following question: How can mobile services used to streamline administrative tasks? This study is about developing a mobile application that will contain the same features as the existing system, but must be mobile suit.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.